From c78a057ec4f3da9487f5fcce29a35785c930e17c Mon Sep 17 00:00:00 2001
From: Sets3n <76554585+Sets3n@users.noreply.github.com>
Date: Wed, 22 Sep 2021 14:38:07 +0800
Subject: [Keyboard] add kk980 keyboard (#14436)

---
 keyboards/sets3n/kk980/readme.md | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 keyboards/sets3n/kk980/readme.md

(limited to 'keyboards/sets3n/kk980/readme.md')

diff --git a/keyboards/sets3n/kk980/readme.md b/keyboards/sets3n/kk980/readme.md
new file mode 100644
index 0000000000..0a1142e571
--- /dev/null
+++ b/keyboards/sets3n/kk980/readme.md
@@ -0,0 +1,31 @@
+# kk980
+
+![kk980](https://i.imgur.com/NDsBMR6.jpg)
+
+A hotswap 98% RGB Mechanical keyboard.
+
+* Keyboard Maintainer: [sets3n](https://github.com/sets3n)
+* Hardware Supported: kk980 PCB
+* Hardware Availability: -
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+## HEX
+
+Make example for this keyboard (after setting up your build environment):
+
+    make sets3n/kk980:default
+
+## FLASH
+
+Flashing example for this keyboard:
+
+    make sets3n/kk980:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-- 
cgit v1.2.3