From 958600d51844ca267c9c7dac5f5686c54428b19b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?S=E1=BA=AFn?= <59417802+MaiTheSan@users.noreply.github.com> Date: Tue, 19 Apr 2022 09:33:32 +0700 Subject: [Keyboard] Add Amber80 Solder & VCL65 Solder (#15945) Co-authored-by: Joel Challis Co-authored-by: Ryan --- keyboards/sawnsprojects/amber80/readme.md | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 keyboards/sawnsprojects/amber80/readme.md (limited to 'keyboards/sawnsprojects/amber80/readme.md') diff --git a/keyboards/sawnsprojects/amber80/readme.md b/keyboards/sawnsprojects/amber80/readme.md new file mode 100644 index 0000000000..bc5dd417fc --- /dev/null +++ b/keyboards/sawnsprojects/amber80/readme.md @@ -0,0 +1,25 @@ +# Amber80 solder + +A TKL keyboard sold in several variants. + +1. [Solder](solder/): 1/2022. Atmega32u4 soldered keyboard. Sold under the name "Amber80" with Amber80 keyboard case. Compatible with Amber80 keyboard case. + + **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. + +* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) +* Hardware Supported: Amber80 +* Hardware Availability: Comming Soon + +Make examples for this keyboard (after setting up your build environment): + + make sawnsprojects/amber80/solder:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file -- cgit v1.2.3