From 4ec3e239baf618e7f90e4e2136ab957a483f8d59 Mon Sep 17 00:00:00 2001 From: Poring <97579443+PoringH@users.noreply.github.com> Date: Thu, 21 Sep 2023 10:45:29 +0700 Subject: [Keyboard] Add QCK-75 (#21180) Co-authored-by: Ryan Co-authored-by: Joel Challis Co-authored-by: Drashna Jaelre Co-authored-by: Duncan Sutherland --- keyboards/qck75/v1/readme.md | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 keyboards/qck75/v1/readme.md (limited to 'keyboards/qck75/v1/readme.md') diff --git a/keyboards/qck75/v1/readme.md b/keyboards/qck75/v1/readme.md new file mode 100644 index 0000000000..b51dca8e40 --- /dev/null +++ b/keyboards/qck75/v1/readme.md @@ -0,0 +1,28 @@ +# qck75 + +[qck75](https://i.imgur.com/exdD8Hgh.jpeg) + +This keyboard is a keyboard made for self use +75% layout with extra keys for macro with led and knob + +* Keyboard Maintainer: [Andrian](https://github.com/PoringH) +* Hardware Supported: This project uses STM32F072R8Tx for the mcu on the pcb +* Hardware Availability: https://github.com/PoringH/QCK75-XT + +Make example for this keyboard (after setting up your build environment): + + make qck75/v1:default + +Flashing example for this keyboard: + + make qck75/v1:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available -- cgit v1.2.3