From 6a8c0a6468f4e4ce48a59152418a226d0f027497 Mon Sep 17 00:00:00 2001
From: Joel Challis <git@zvecr.com>
Date: Sun, 24 Nov 2019 04:42:20 +0000
Subject: [Keyboard] Update ATmega32A readme files to match template (#7462)
* Update atmega32a readme files to match template
* Update atmega32a readme files to match template - fixes
* Apply suggestions from code review
---
keyboards/panc60/readme.md | 43 ++++++++-----------------------------------
1 file changed, 8 insertions(+), 35 deletions(-)
(limited to 'keyboards/panc60')
diff --git a/keyboards/panc60/readme.md b/keyboards/panc60/readme.md
index 3312a07ce7..52dcc4ccea 100644
--- a/keyboards/panc60/readme.md
+++ b/keyboards/panc60/readme.md
@@ -4,45 +4,18 @@
The panc60 is a 60% PCB with backlight and rgb underglow.
-Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin), [Jack Humbert](https://github.com/jackhumbert)
-Hardware Supported: panc60 PCB
-Hardware Availability: [PANC Interactive](https://store.panc.co/product/panc60-60-pcb)
+* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin), [Jack Humbert](https://github.com/jackhumbert)
+* Hardware Supported: panc60 PCB
+* Hardware Availability: [PANC Interactive](https://store.panc.co/product/panc60-60-pcb)
Make example for this keyboard (after setting up your build environment):
make panc60:default
-Flashing
-
-**Reset Key:** Hold down the key located at `K40`, commonly programmed as left control while plugging in the keyboard.
-
-ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
-
-To put the panc60 into reset, hold left control while plugging in.
-
-Windows:
-1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
-2. Place your keyboard into reset.
-3. Press the `Find Device` button and ensure that your keyboard is found.
-4. Press the `Open .hex File` button and locate the `.hex` file you created.
-5. Press the `Flash Device` button and wait for the process to complete.
-
-macOS:
-1. Install homebrew by typing the following:
- ```
- /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
- ```
-2. Install `crosspack-avr`.
- ```
- brew cask install crosspack-avr
- ```
-3. Install the following packages:
- ```
- brew install python3
- pip3 install pyusb
- brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-
-4. Place your keyboard into reset.
-5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
+Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+
+ make panc60:default:flash
+
+**Reset Key**: Hold down the key located at *K40*, commonly programmed as *left control* while plugging in the keyboard.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--
cgit v1.2.3