From c9283f4c1f073da0072638e78b3d5bf5619a89f4 Mon Sep 17 00:00:00 2001 From: kb-elmo Date: Mon, 30 Aug 2021 20:29:15 +0200 Subject: [Keyboard] Add OwLab Jelly Epoch (#14190) Co-authored-by: Ryan --- keyboards/owlab/jelly_epoch/soldered/readme.md | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 keyboards/owlab/jelly_epoch/soldered/readme.md (limited to 'keyboards/owlab/jelly_epoch/soldered/readme.md') diff --git a/keyboards/owlab/jelly_epoch/soldered/readme.md b/keyboards/owlab/jelly_epoch/soldered/readme.md new file mode 100644 index 0000000000..1b718f8902 --- /dev/null +++ b/keyboards/owlab/jelly_epoch/soldered/readme.md @@ -0,0 +1,21 @@ +# Jelly Epoch - soldered PCB + +![jelly](https://i.imgur.com/Hs7tFCgl.jpg) + +A 75% made by Owlab. + +* Keyboard Maintainer: [owlab](https://github.com/owlab-git), [kb-elmo](https://github.com/kb-elmo) +* Hardware Supported: Jelly Epoch soldered PCB +* Hardware Availability: Ended groupbuy: https://www.popkeyboard.com/products/jrrgvdsyu47wer + +Make example for this keyboard (after setting up your build environment): + + make owlab/jelly_epoch/soldered:default + +Flashing example for this keyboard: + + make owlab/jelly_epoch/soldered:default:flash + +**Bootloader:** Press the physical reset button on the bottom side of the PCB (labeled SW1) or hold down ESC while plugging in the board. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3