From c68597d9ad983c7d8f2b857f795037f2a441522d Mon Sep 17 00:00:00 2001
From: MechMerlin <30334081+mechmerlin@users.noreply.github.com>
Date: Wed, 20 Dec 2017 16:54:07 -0800
Subject: Octagon V1 Support (Port) (#2184)

* Preliminary commit for Octagon V1 support

This is essentially a cp -R v2 v1 with a few things changed to
get it to compile and build.

* The Octagon V1 supports up to 84 keys as opposed to the V2 which
supports up to 86. This commit changes the keymap to match it.

* Temporary default keymap just to get things to compile

* Update readme file

* Fix switch matrix

* Fix underglow lighting option

* Fix keymap to take care of shifted columns

* Fix keymap formatting

* Remove un-needed files left over from rasmusx

* Make Octagon V1 have its own keymap directory with default keymap

* Make Octagon V2 have its own keymap directory with default keymap

* Cleanups and readme edits
---
 keyboards/octagon/v1/rules.mk | 72 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)
 create mode 100644 keyboards/octagon/v1/rules.mk

(limited to 'keyboards/octagon/v1/rules.mk')

diff --git a/keyboards/octagon/v1/rules.mk b/keyboards/octagon/v1/rules.mk
new file mode 100644
index 0000000000..a08695b504
--- /dev/null
+++ b/keyboards/octagon/v1/rules.mk
@@ -0,0 +1,72 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= no        # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+RGBLIGHT_ENABLE = yes
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c \
+		
-- 
cgit v1.2.3