From 4d92aff2aeed79f6b0c792a5b75744c5dc1049cd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20A=2E=20Volpato?= Date: Tue, 11 Jul 2023 00:50:18 -0300 Subject: [Keyboard] Add Mode M256-WS and M256-WH (#20502) Co-authored-by: Ryan --- keyboards/mode/m256ws/readme.md | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 keyboards/mode/m256ws/readme.md (limited to 'keyboards/mode/m256ws/readme.md') diff --git a/keyboards/mode/m256ws/readme.md b/keyboards/mode/m256ws/readme.md new file mode 100644 index 0000000000..dee23c9a8c --- /dev/null +++ b/keyboards/mode/m256ws/readme.md @@ -0,0 +1,25 @@ +# Mode M256-WS PCB QMK Firmware + +![m256wh](https://imgur.com/97KRZCrh.jpg) + +The M256-WS is the hotswap version PCB support for the Mode Envoy. + +* Keyboard Maintainer: [Gondolindrim](https://github.com/Gondolindrim) +* Hardware Supported: proprietary PCBs using the STM32F401 microcontroller +* Hardware Availability: as of april 18, these PCBs are on the verge of being sold with the first kits of the Mode Envoy. + +## How to flash + +In order to flash this PCB, first build the default layout (after setting up your build environment): + + make mode/m256ws:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: press the button on the back of the PCB for at least five seconds +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (escape key, layer 1 of the default keymap) -- cgit v1.2.3