From acc11f4941649a92fad4588e0598ee808e493cb1 Mon Sep 17 00:00:00 2001 From: Kyle McCreery Date: Thu, 14 Jul 2022 02:26:13 -0400 Subject: [Keyboard] MechWild BB Steno (#17163) * allowing the kt60 file to be modified so I can do things while waiting for it to be fixed upstream * Initial commit * testing modes * working on puckbuddy firmware. This is all working for now but need to clean it up and personalize it. * needs to be updated from vial build * prepping for PR * added rgb mode cycling to fn1 since it isn't on the encoder for these maps * shipping firmware built. Need to clean up readme and info.json layout * removing puckbuddy files from this branch * readme done, prepping for PR * info.json updated prepping for PR * Restore cirque driver that was modified from puckbuddy testing on this branch * applying changes from review * Update keyboards/mechwild/bbs/bbs.c * Fixed info.json * Apply suggestions from code review --- keyboards/mechwild/bbs/readme.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/mechwild/bbs/readme.md (limited to 'keyboards/mechwild/bbs/readme.md') diff --git a/keyboards/mechwild/bbs/readme.md b/keyboards/mechwild/bbs/readme.md new file mode 100644 index 0000000000..b13e8fb54e --- /dev/null +++ b/keyboards/mechwild/bbs/readme.md @@ -0,0 +1,27 @@ +# BB Steno (BBS) + +![BBS](https://i.imgur.com/XIjlzKOh.png) + +A bare-bones stenography keyboard. No bells or whistles. Simple, cheap, effective, steno. + +* Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery) +* Hardware Supported: BBS v0.1 +* Hardware Availability: [BBS on MechWild](https://mechwild.com/product/bb-steno/) + +Make example for this keyboard (after setting up your build environment): + + make mechwild/bbs:default + +Flashing example for this keyboard: + + make mechwild/bbs:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it. +* **Physical reset button**: Press and hold the boot0 button on the blackpill, tap and release the nrst button on the blackpill, then release the boot0 button. +* **Keycode in layout**: Press the key mapped to `RESET` if it is available. -- cgit v1.2.3