From 8f221052897754870e5c08a2de92c24d20cd307e Mon Sep 17 00:00:00 2001 From: Ryan Date: Tue, 19 Sep 2023 19:31:54 +1000 Subject: Add and use I2C address defines for ISSI LED drivers (#22008) --- keyboards/mechlovin/delphine/rgb_led/config.h | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'keyboards/mechlovin/delphine/rgb_led/config.h') diff --git a/keyboards/mechlovin/delphine/rgb_led/config.h b/keyboards/mechlovin/delphine/rgb_led/config.h index 048bed9e03..66455e1158 100644 --- a/keyboards/mechlovin/delphine/rgb_led/config.h +++ b/keyboards/mechlovin/delphine/rgb_led/config.h @@ -1,13 +1,7 @@ #pragma once -//rgb matrix setting// This is a 7-bit address, that gets left-shifted and bit 0 -// set to 0 for write, 1 for read (as per I2C protocol) -// The address will vary depending on your wiring: -// 0b1110100 AD <-> GND -// 0b1110111 AD <-> VCC -// 0b1110101 AD <-> SCL -// 0b1110110 AD <-> SDA -#define DRIVER_ADDR_1 0b1110110 +//rgb matrix setting +#define DRIVER_ADDR_1 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_DRIVER_COUNT 1 #define RGB_MATRIX_LED_COUNT 25 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses -- cgit v1.2.3