From 1dd6ceb45dfcf5f0991b84fea5a761a35df7fcda Mon Sep 17 00:00:00 2001 From: climbalima Date: Wed, 16 Nov 2016 19:18:54 -0500 Subject: Updated my repo to current qmk --- keyboards/maxipad/rules.mk | 67 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 keyboards/maxipad/rules.mk (limited to 'keyboards/maxipad/rules.mk') diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk new file mode 100644 index 0000000000..55898147dd --- /dev/null +++ b/keyboards/maxipad/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 -- cgit v1.2.3 From 01736a502e8f2900bde229a086a4ab03513f6781 Mon Sep 17 00:00:00 2001 From: climbalima Date: Fri, 18 Nov 2016 23:40:34 -0500 Subject: just saving --- keyboards/maxipad/rules.mk | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) (limited to 'keyboards/maxipad/rules.mk') diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 55898147dd..e6e5923f16 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -1,3 +1,5 @@ + + # MCU name #MCU = at90usb1287 MCU = atmega32u4 @@ -49,19 +51,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 # Build Options -# change yes to no to disable +# comment out to disable the options. # -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +USE_PRO_MICRO ?= yes \ No newline at end of file -- cgit v1.2.3 From e356de222023d2a8f7d5ee79030a37eaa9b1b25f Mon Sep 17 00:00:00 2001 From: climbalima Date: Sat, 19 Nov 2016 00:44:52 -0500 Subject: added the pinout for pro micro into maxipad --- keyboards/maxipad/rules.mk | 1 + 1 file changed, 1 insertion(+) (limited to 'keyboards/maxipad/rules.mk') diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 55898147dd..f9bf74179b 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -65,3 +65,4 @@ MIDI_ENABLE ?= no # MIDI controls UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE ?= no # Audio output on port C6 +USE_PRO_MICRO ?= yes \ No newline at end of file -- cgit v1.2.3 From 102a830bbdb302eb0951ec7910ab7c9feae272d1 Mon Sep 17 00:00:00 2001 From: climbalima Date: Sat, 19 Nov 2016 00:49:20 -0500 Subject: changed readme --- keyboards/maxipad/rules.mk | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'keyboards/maxipad/rules.mk') diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index f9bf74179b..56b2042efa 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -64,5 +64,4 @@ BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by MIDI_ENABLE ?= no # MIDI controls UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 -USE_PRO_MICRO ?= yes \ No newline at end of file +AUDIO_ENABLE ?= no # Audio output on port C6 \ No newline at end of file -- cgit v1.2.3 From 0f71c81df833a282250ecc4e66034320e40b208e Mon Sep 17 00:00:00 2001 From: climbalima Date: Sat, 3 Dec 2016 17:37:41 -0500 Subject: having trouble with conflicts --- keyboards/maxipad/rules.mk | 3 --- 1 file changed, 3 deletions(-) (limited to 'keyboards/maxipad/rules.mk') diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 49bb5f0022..a5c7391523 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -59,7 +59,6 @@ EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) CONSOLE_ENABLE ?= yes # Console for debug(+400) COMMAND_ENABLE ?= yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -<<<<<<< HEAD # SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend # NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality @@ -67,7 +66,6 @@ COMMAND_ENABLE ?= yes # Commands for debug and configuration # UNICODE_ENABLE ?= YES # Unicode # BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID USE_PRO_MICRO ?= yes -======= SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE ?= no # USB Nkey Rollover @@ -76,4 +74,3 @@ MIDI_ENABLE ?= no # MIDI controls UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE ?= no # Audio output on port C6 ->>>>>>> 102a830bbdb302eb0951ec7910ab7c9feae272d1 -- cgit v1.2.3