From 6424dadd3785d83ebbe17861ed9f9b495b8ba6ae Mon Sep 17 00:00:00 2001 From: Ryan Date: Sun, 24 Sep 2023 12:32:20 +1000 Subject: Remove custom ISSI lighting code (#22073) * Remove CU75 custom lighting * Remove LFK78 custom lighting * Remove LFK87 custom lighting * Remove LFKPad custom lighting * Remove Mini1800 custom lighting * Remove SMK65 custom lighting * Remove LFK65-HS custom lighting * Remove LFKeyboards custom lighting * Remove Meira custom lighting --- keyboards/lfkeyboards/lfk87/lfk87.c | 98 ++----------------------------------- 1 file changed, 3 insertions(+), 95 deletions(-) (limited to 'keyboards/lfkeyboards/lfk87/lfk87.c') diff --git a/keyboards/lfkeyboards/lfk87/lfk87.c b/keyboards/lfkeyboards/lfk87/lfk87.c index 3e95361a33..849f0ebcc5 100644 --- a/keyboards/lfkeyboards/lfk87/lfk87.c +++ b/keyboards/lfkeyboards/lfk87/lfk87.c @@ -1,42 +1,20 @@ - -#include -#include -#include #include "lfk87.h" -#include "issi.h" -#include "TWIlib.h" -#include "lighting.h" -#include "debug.h" -#include "quantum.h" +#include uint16_t click_hz = CLICK_HZ; uint16_t click_time = CLICK_MS; uint8_t click_toggle = CLICK_ENABLED; -__attribute__((weak)) -const Layer_Info layer_info[] = { - // Layer Mask Red Green Blue - {0x00000000, 0xFFFFFFFF, {0x00, 0xFF, 0x00}}, // base layers - green - {0x00000002, 0xFFFFFFFE, {0x00, 0x00, 0xFF}}, // function layer - blue - {0x00000004, 0xFFFFFFFC, {0xFF, 0x00, 0xFF}}, // settings layer - magenta - {0xFFFFFFFF, 0xFFFFFFFF, {0xFF, 0xFF, 0xFF}}, // unknown layer - REQUIRED - white -}; - void matrix_init_kb(void) { // put your keyboard start-up code here // runs once when the firmware starts up matrix_init_user(); - set_rgb(31, 0x00, 0x00, 0x00); // Caps lock - set_rgb(32, 0xFF, 0x00, 0x00); // Layer indicator, start red #ifndef AUDIO_ENABLE // If we're not using the audio pin, drive it low setPinOutput(C6); writePinLow(C6); #endif -#ifdef ISSI_ENABLE - issi_init(); -#endif #ifdef WATCHDOG_ENABLE // This is done after turning the layer LED red, if we're caught in a loop // we should get a flashing red light @@ -49,49 +27,10 @@ void matrix_scan_kb(void) #ifdef WATCHDOG_ENABLE wdt_reset(); #endif -#ifdef ISSI_ENABLE - // switch/underglow lighting update - static uint32_t issi_device = 0; - static uint32_t twi_last_ready = 0; - if(twi_last_ready > 1000){ - // Its been way too long since the last ISSI update, reset the I2C bus and start again - twi_last_ready = 0; - TWIInit(); - force_issi_refresh(); - } - if(isTWIReady()){ - twi_last_ready = 0; - // If the i2c bus is available, kick off the issi update, alternate between devices - update_issi(issi_device, issi_device); - if(issi_device){ - issi_device = 0; - }else{ - issi_device = 3; - } - }else{ - twi_last_ready++; - } -#endif - // Update layer indicator LED - // - // Not sure how else to reliably do this... TMK has the 'hook_layer_change' - // but can't find QMK equiv - static uint32_t layer_indicator = -1; - if(layer_indicator != layer_state){ - for(uint32_t i=0;; i++){ - // the layer_info list should end with layer 0xFFFF - // it will break this out of the loop and define the unknown layer color - if((layer_info[i].layer == (layer_state & layer_info[i].mask)) || (layer_info[i].layer == 0xFFFFFFFF)){ - set_rgb(32, layer_info[i].color.red, layer_info[i].color.green, layer_info[i].color.blue); - layer_indicator = layer_state; - break; - } - } - } matrix_scan_user(); } -void click(uint16_t freq, uint16_t duration){ +void clicking_notes(uint16_t freq, uint16_t duration){ #ifdef AUDIO_ENABLE if(freq >= 100 && freq <= 20000 && duration < 100){ play_note(freq, 10); @@ -106,11 +45,10 @@ void click(uint16_t freq, uint16_t duration){ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { if (click_toggle && record->event.pressed){ - click(click_hz, click_time); + clicking_notes(click_hz, click_time); } if (keycode == QK_BOOT) { reset_keyboard_kb(); - } else { } return process_record_user(keycode, record); } @@ -121,35 +59,5 @@ void reset_keyboard_kb(void){ wdt_disable(); wdt_reset(); #endif - set_rgb(31, 0x00, 0xFF, 0xFF); - set_rgb(32, 0x00, 0xFF, 0xFF); - force_issi_refresh(); reset_keyboard(); } - -bool led_update_kb(led_t led_state) { - bool res = led_update_user(led_state); - if(res) { - // Set capslock LED to Blue - if (led_state.caps_lock) { - set_rgb(31, 0x00, 0x00, 0x7F); - } else{ - set_rgb(31, 0x00, 0x00, 0x00); - } - } - return res; -} - -// Lighting info, see lighting.h for details -const uint8_t switch_matrices[] = {0, 1}; -const uint8_t rgb_matrices[] = {6, 7}; - -// RGB Map: -// 27 29 10 9 8 7 6 -// 26 5 -// 25 4 -// 24 3 -// 23 22 21 20 14 15 11 1 2 -const uint8_t rgb_sequence[] = { - 27, 29, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 11, 15, 14, 20, 21, 22, 23, 24, 25, 26 -}; -- cgit v1.2.3