From 6e8876be39f829b0327f567d673b23be0f4f28c6 Mon Sep 17 00:00:00 2001
From: Ethan Durrant <5387347+emdarcher@users.noreply.github.com>
Date: Fri, 3 Apr 2020 14:37:31 -0600
Subject: [Keyboard] Lattice60 (#8603)

* created initial files for the lattice60

* modifying the keymaps and config

* keymap edits and docs

* modifying docs and added personal keymap

* added pic and website to readme

* added layout image for default keymap

* updating layout pictures

* minor formatting edit

* file cleanup

* trying to prevent errors with usbconfig

* removed usbconfig.h

* cleaning up comments

* switched to use community hhkb layout
---
 keyboards/lattice60/readme.md | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 keyboards/lattice60/readme.md

(limited to 'keyboards/lattice60/readme.md')

diff --git a/keyboards/lattice60/readme.md b/keyboards/lattice60/readme.md
new file mode 100644
index 0000000000..f5a3dc5942
--- /dev/null
+++ b/keyboards/lattice60/readme.md
@@ -0,0 +1,21 @@
+# lattice60
+
+![lattice60](https://i.imgur.com/1TdrWii.jpg)
+
+A HHKB layout keyboard using only through-hole components.
+
+* Keyboard Maintainer: [emdarcher](https://github.com/emdarcher)
+* Hardware Supported: LATTICE60 PCB
+* Hardware Availability: [KeyHive](https://keyhive.xyz/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make lattice60:default
+
+To activate the USBasploader bootloader, hold the BOOT button down during power on or reset. LED2 should light up to indicate that the bootloader is active.
+
+Flash the firmware using the `make` command with the `flash` parameter, example below:
+
+    make lattice60:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-- 
cgit v1.2.3