From 5ac71ef27acc3ed9178e3204078779bc9ff1047d Mon Sep 17 00:00:00 2001 From: Yizhen Liu <62583086+edwardslau@users.noreply.github.com> Date: Sat, 2 Jul 2022 06:14:27 -0700 Subject: [Keyboard]KPrepublic bm80v2 Keyboard ANSI support (#17192) Co-authored-by: Drashna Jaelre --- keyboards/kprepublic/bm80v2/readme.md | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 keyboards/kprepublic/bm80v2/readme.md (limited to 'keyboards/kprepublic/bm80v2/readme.md') diff --git a/keyboards/kprepublic/bm80v2/readme.md b/keyboards/kprepublic/bm80v2/readme.md new file mode 100644 index 0000000000..0f799c659a --- /dev/null +++ b/keyboards/kprepublic/bm80v2/readme.md @@ -0,0 +1,20 @@ +# %bm80v2% + +A 80% hotswap inswitch RGB keyboard. + +* Keyboard Maintainer: [%bdtc123%](https://github.com/bdtc123) +* Hardware Supported: BM80V2 +* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm80rgb-bm80-rgb-80-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c?_pos=7&_sid=767c48383&_ss=r) + +Make example for this keyboard (after setting up your build environment): + + make kprepublic bm80v2:default + +Flashing example for this keyboard: + + make kprepublic bm80v2:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -- cgit v1.2.3