From c91296f001a802ff34f23b71c2e673da4dca2f0b Mon Sep 17 00:00:00 2001
From: d-floe <31980883+d-floe@users.noreply.github.com>
Date: Tue, 14 Mar 2023 14:56:31 -0500
Subject: [Keyboard] Add KP60 (#20096)

Co-authored-by: adophoxia <100170946+adophoxia@users.noreply.github.com>
Co-authored-by: jack <0x6a73@protonmail.com>
---
 keyboards/keyspensory/kp60/readme.md | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 keyboards/keyspensory/kp60/readme.md

(limited to 'keyboards/keyspensory/kp60/readme.md')

diff --git a/keyboards/keyspensory/kp60/readme.md b/keyboards/keyspensory/kp60/readme.md
new file mode 100644
index 0000000000..b0f6ed8a2a
--- /dev/null
+++ b/keyboards/keyspensory/kp60/readme.md
@@ -0,0 +1,23 @@
+# Keyspensory KP60
+
+![Keyspensory KP60 PCB](https://i.imgur.com/3Ob0bp9h.png)
+
+* Keyboard Maintainer: [Freather](https://github.com/CMMS-Freather), [d-floe](https://github.com/d-floe)
+* Hardware Supported: PCB, Atmega32u4
+
+Make example for this keyboard (after setting up your build environment):
+
+    make keyspensory/kp60:default
+
+Flashing example for this keyboard:
+
+    make keyspensory/kp60:default:flash
+
+
+## Bootloader
+Enter the bootloader in 3 ways:
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-- 
cgit v1.2.3