From 9f63bce70bd8e065e54de17c48994c3c008d2e0a Mon Sep 17 00:00:00 2001 From: peepeetee <43021794+peepeetee@users.noreply.github.com> Date: Tue, 19 Apr 2022 18:17:21 +0800 Subject: move keyhive exclusive boards into /keyhive (#16084) Co-authored-by: Nick Brassel --- keyboards/keyhive/lattice60/readme.md | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 keyboards/keyhive/lattice60/readme.md (limited to 'keyboards/keyhive/lattice60/readme.md') diff --git a/keyboards/keyhive/lattice60/readme.md b/keyboards/keyhive/lattice60/readme.md new file mode 100644 index 0000000000..92fe6198e0 --- /dev/null +++ b/keyboards/keyhive/lattice60/readme.md @@ -0,0 +1,21 @@ +# lattice60 + +![lattice60](https://i.imgur.com/1TdrWii.jpg) + +A HHKB layout keyboard using only through-hole components. + +* Keyboard Maintainer: [emdarcher](https://github.com/emdarcher) +* Hardware Supported: LATTICE60 PCB +* Hardware Availability: [KeyHive](https://keyhive.xyz/) + +Make example for this keyboard (after setting up your build environment): + + make keyhive/lattice60:default + +To activate the USBasploader bootloader, hold the BOOT button down during power on or reset. LED2 should light up to indicate that the bootloader is active. + +Flash the firmware using the `make` command with the `flash` parameter, example below: + + make keyhive/lattice60:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3