From 3cc68543ca8c69048ffc0655d92be238afcee376 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 15 Apr 2020 13:31:09 -0700 Subject: KC60 Refactor (#8782) --- keyboards/kc60/config.h | 138 ++++++++++++++---------------------------------- 1 file changed, 39 insertions(+), 99 deletions(-) (limited to 'keyboards/kc60/config.h') diff --git a/keyboards/kc60/config.h b/keyboards/kc60/config.h index 7e9cdaa086..7c6e695a45 100644 --- a/keyboards/kc60/config.h +++ b/keyboards/kc60/config.h @@ -15,18 +15,17 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 +#define VENDOR_ID 0x530A +#define PRODUCT_ID 0x6FFC #define DEVICE_VER 0x0001 -#define MANUFACTURER You -#define PRODUCT kc60v2 -#define DESCRIPTION A custom keyboard +#define MANUFACTURER NPKC +#define PRODUCT KC60 +#define DESCRIPTION QMK Firmware: KC60 /* key matrix size */ #define MATRIX_ROWS 5 @@ -41,19 +40,45 @@ along with this program. If not, see . * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * -*/ - -// Possible pins for columns include: F1 F0 E6 D7 D6 D4 C7 C6 B7 B5 B4 B3 B1 B0 -// Pins for rows include: D0 D1 F6 F7 D5 -// KC60 Version 2 + */ #define MATRIX_ROW_PINS { D0, D1, F6, F7, D5 } #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 } #define UNUSED_PINS +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + #define BACKLIGHT_PIN B6 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 5 -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW +#ifdef RGBLIGHT_ENABLE +# define RGB_DI_PIN F5 +# define RGBLED_NUM 16 // Number of LEDs. Change this to match your use case. +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +// # define RGBLIGHT_EFFECT_BREATHING +// # define RGBLIGHT_EFFECT_RAINBOW_MOOD +// # define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// # define RGBLIGHT_EFFECT_SNAKE +// # define RGBLIGHT_EFFECT_KNIGHT +// # define RGBLIGHT_EFFECT_CHRISTMAS +// # define RGBLIGHT_EFFECT_STATIC_GRADIENT +// # define RGBLIGHT_EFFECT_RGB_TEST +// # define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +// # define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// # define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 @@ -61,99 +86,14 @@ along with this program. If not, see . /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -#endif -- cgit v1.2.3