From f54b4771eb23027be1bd66a6fe1300713b593d58 Mon Sep 17 00:00:00 2001 From: jpetermans Date: Wed, 24 May 2017 11:20:50 -0700 Subject: keymap example update and tweak to set_led_bit function --- keyboards/infinity60/keymaps/jpetermans/keymap.c | 6 +++--- keyboards/infinity60/keymaps/jpetermans/readme.md | 12 ++++++------ 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'keyboards/infinity60/keymaps/jpetermans') diff --git a/keyboards/infinity60/keymaps/jpetermans/keymap.c b/keyboards/infinity60/keymaps/jpetermans/keymap.c index 8d19834b2f..cc4633b1b4 100644 --- a/keyboards/infinity60/keymaps/jpetermans/keymap.c +++ b/keyboards/infinity60/keymaps/jpetermans/keymap.c @@ -59,7 +59,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, \ TT(_FNAV), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,F(TILDE),KC_NO, \ - KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL \ + KC_LCTL, KC_LGUI,KC_LALT, LT(_FNAV, KC_SPC), KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL \ ), /* numpad */ @@ -68,7 +68,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______,_______,_______,_______,_______,_______, KC_P4, KC_P5, KC_P6, KC_PAST, _______,_______,_______, \ MO(_FNAV),_______,_______,_______,_______,_______,_______, KC_P1, KC_P2, KC_P3, KC_PMNS, _______,_______, \ _______,_______,_______,_______,_______,_______,_______, KC_P0,KC_COMM,KC_PDOT,KC_PPLS, _______,KC_NO, \ - _______,_______,_______, MO(_BASE), _______,_______,_______,_______ \ + _______,_______,_______, TO(_BASE), _______,_______,_______,_______ \ ), /* F-, arrow, and media keys */ @@ -290,7 +290,7 @@ void matrix_scan_user(void) { led_pin_byte = layer_state & 0xFF; msg=(7 << 8) | DISPLAY_PAGE; chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); - msg=(1<<16) | (led_pin_byte << 8) | SET_FULL_ROW; + msg=(1 << 16) | (led_pin_byte << 8) | SET_FULL_ROW; chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); break; diff --git a/keyboards/infinity60/keymaps/jpetermans/readme.md b/keyboards/infinity60/keymaps/jpetermans/readme.md index 63fd88ec22..b83057ea7b 100644 --- a/keyboards/infinity60/keymaps/jpetermans/readme.md +++ b/keyboards/infinity60/keymaps/jpetermans/readme.md @@ -16,9 +16,9 @@ digits mean "row" and "col", i.e. 45 means pin 4, column 5 in the IS31 datasheet ``` *Unused in Alphabet Layout -The IS31 includes 8 pages (or frames) 0-7 and each page consists of 144 bytes +The IS31 includes 8 led pages (or frames) 0-7 than can be displayed, and each page consists of 144 bytes. - **bytes 0 - 17** - LED control (on/off). - * 18 pins which alternate between A and B matrices (CA1, CB1, CA2, CB2, ..). + * 18 pins which alternate between A and B matrices (A1, B1, A2, B2, ..). * Each byte controls the 8 leds on that pin with bits (8 to 1). - **bytes 8 - 35** - Blink control. * Same as LED control above, but sets blink on/off. @@ -31,7 +31,7 @@ In the Infinity60 project folder, led_controller.c sets up ability to write led One function is available to directly set leds without the mailbox: ``` -write_led_page(page#, array of leds by address, # of leds in array) +write_led_page(page#, array of leds by address, # of addresses in array) ``` This function saves a full page to the controller using a supplied array of led locations such as: ```c @@ -45,7 +45,7 @@ write_led_page(5, led_numpad, 16); ``` Remaining led control is done through the led mailbox using these message types: -- **SET_FULL_ROW** (3 bytes) - row#, message type, 8-bit mask. Sets all leds on one pin per the bit mask. +- **SET_FULL_ROW** (3 bytes) - message type, 8-bit mask, and row#. Sets all leds on one pin per the bit mask. - **OFF_LED, ON_LED, TOGGLE_LED** (3 bytes) - message type, led address, and page#. Off/on/toggle specific led. - **BLINK_OFF_LED, BLINK_ON_LED, BLINK_OFF_LED** (3 bytes) - message type, led address, and page#. Set blink Off/on/toggle for specific led. - **TOGGLE_ALL** (1 byte) - Turn on/off full backlight. @@ -68,7 +68,7 @@ chMBPost(&led_mailbox, message, timeout); An example: ```c //set the message to be sent. First byte (LSB) is the led address, and second is the message type -msg=(42 << 8) | ON_LED +msg=(42 << 8) | ON_LED; //send msg to the led mailbox chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); @@ -76,7 +76,7 @@ chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); Another: ```c -msg=(46 << 8) | BLINK_TOGGLE_LED +msg=(46 << 8) | BLINK_TOGGLE_LED; chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); ``` -- cgit v1.2.3