From d2accb48e784030637f5517dfec66b13f1eab609 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sat, 20 Aug 2022 11:34:17 +0100 Subject: RESET -> QK_BOOT keyboard readme (#18110) --- keyboards/handwired/10k/readme.md | 2 +- keyboards/handwired/3dfoxc/readme.md | 2 +- keyboards/handwired/3dortho14u/readme.md | 2 +- keyboards/handwired/3dortho14u/rev1/readme.md | 2 +- keyboards/handwired/3dortho14u/rev2/readme.md | 2 +- keyboards/handwired/axon/readme.md | 4 ++-- keyboards/handwired/baredev/rev1/readme.md | 2 +- keyboards/handwired/battleship_gamepad/readme.md | 2 +- keyboards/handwired/croxsplit44/readme.md | 2 +- keyboards/handwired/dactyl_manuform/6x6/readme.md | 2 +- keyboards/handwired/elrgo_s/readme.md | 2 +- keyboards/handwired/hillside/0_1/readme.md | 2 +- keyboards/handwired/hillside/46/readme.md | 2 +- keyboards/handwired/hillside/52/readme.md | 2 +- keyboards/handwired/lagrange/readme.md | 2 +- keyboards/handwired/lemonpad/readme.md | 2 +- keyboards/handwired/m40/5x5_macropad/readme.md | 2 +- keyboards/handwired/macroboard/readme.md | 2 +- keyboards/handwired/meck_tkl/readme.md | 2 +- keyboards/handwired/snatchpad/readme.md | 2 +- keyboards/handwired/swiftrax/bumblebee/readme.md | 2 +- keyboards/handwired/swiftrax/digicarp65/readme.md | 4 ++-- keyboards/handwired/swiftrax/digicarpice/readme.md | 2 +- keyboards/handwired/swiftrax/glacier/readme.md | 2 +- keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md | 2 +- keyboards/handwired/tractyl_manuform/readme.md | 2 +- keyboards/handwired/wakizashi40/readme.md | 2 +- 27 files changed, 29 insertions(+), 29 deletions(-) (limited to 'keyboards/handwired') diff --git a/keyboards/handwired/10k/readme.md b/keyboards/handwired/10k/readme.md index 270297e927..e681a274d3 100644 --- a/keyboards/handwired/10k/readme.md +++ b/keyboards/handwired/10k/readme.md @@ -21,4 +21,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/3dfoxc/readme.md b/keyboards/handwired/3dfoxc/readme.md index 3d6e33a5c1..9f4dff57d6 100644 --- a/keyboards/handwired/3dfoxc/readme.md +++ b/keyboards/handwired/3dfoxc/readme.md @@ -37,6 +37,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/3dortho14u/readme.md b/keyboards/handwired/3dortho14u/readme.md index 3163891d48..926721fc72 100644 --- a/keyboards/handwired/3dortho14u/readme.md +++ b/keyboards/handwired/3dortho14u/readme.md @@ -37,4 +37,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/3dortho14u/rev1/readme.md b/keyboards/handwired/3dortho14u/rev1/readme.md index e785369b23..7a30179797 100644 --- a/keyboards/handwired/3dortho14u/rev1/readme.md +++ b/keyboards/handwired/3dortho14u/rev1/readme.md @@ -36,4 +36,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/3dortho14u/rev2/readme.md b/keyboards/handwired/3dortho14u/rev2/readme.md index bb2e982130..0b2f1c09df 100644 --- a/keyboards/handwired/3dortho14u/rev2/readme.md +++ b/keyboards/handwired/3dortho14u/rev2/readme.md @@ -36,4 +36,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/axon/readme.md b/keyboards/handwired/axon/readme.md index ca422130ef..d48297b4f7 100644 --- a/keyboards/handwired/axon/readme.md +++ b/keyboards/handwired/axon/readme.md @@ -15,8 +15,8 @@ Make example for this keyboard (after setting up your build environment): ## To reset into bootloader mode: 1. While plugged in, press and hold `BOOT` switch -2. While holding `BOOT`, press `RESET` and hold it for a second or two -3. Release `RESET` +2. While holding `BOOT`, press `QK_BOOT` and hold it for a second or two +3. Release `QK_BOOT` 4. Release `BOOT` 5. The keyboard should now be recognized as a USBasp programmer device. diff --git a/keyboards/handwired/baredev/rev1/readme.md b/keyboards/handwired/baredev/rev1/readme.md index 3f852f2bc6..1dac2fb6ad 100644 --- a/keyboards/handwired/baredev/rev1/readme.md +++ b/keyboards/handwired/baredev/rev1/readme.md @@ -26,4 +26,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file diff --git a/keyboards/handwired/battleship_gamepad/readme.md b/keyboards/handwired/battleship_gamepad/readme.md index c566753161..58eb72bd28 100644 --- a/keyboards/handwired/battleship_gamepad/readme.md +++ b/keyboards/handwired/battleship_gamepad/readme.md @@ -24,6 +24,6 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key in the 2x5 bank) and plug in the keyboard. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead. -* **Keycode in layout**: Press the key mapped to `RESET`. In the default layout this is the key at (0,0) on layer 1. +* **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the default layout this is the key at (0,0) on layer 1. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/croxsplit44/readme.md b/keyboards/handwired/croxsplit44/readme.md index b9eeb305b2..64a5e2593e 100644 --- a/keyboards/handwired/croxsplit44/readme.md +++ b/keyboards/handwired/croxsplit44/readme.md @@ -20,4 +20,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/dactyl_manuform/6x6/readme.md b/keyboards/handwired/dactyl_manuform/6x6/readme.md index 9b079be466..c7500448da 100644 --- a/keyboards/handwired/dactyl_manuform/6x6/readme.md +++ b/keyboards/handwired/dactyl_manuform/6x6/readme.md @@ -60,4 +60,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at F1 for left side, and F7 for right side. * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET`, in dumam keymap it's assigned to F1 and F12 keys on mod layers. +* **Keycode in layout**: Press the key mapped to `QK_BOOT`, in dumam keymap it's assigned to F1 and F12 keys on mod layers. diff --git a/keyboards/handwired/elrgo_s/readme.md b/keyboards/handwired/elrgo_s/readme.md index 5fb5ab6acb..d741f423d9 100644 --- a/keyboards/handwired/elrgo_s/readme.md +++ b/keyboards/handwired/elrgo_s/readme.md @@ -25,4 +25,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button through the hole on the left side of the case. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/hillside/0_1/readme.md b/keyboards/handwired/hillside/0_1/readme.md index f1ff0f8506..3ae6b8bf3d 100644 --- a/keyboards/handwired/hillside/0_1/readme.md +++ b/keyboards/handwired/hillside/0_1/readme.md @@ -24,6 +24,6 @@ Flashing example for this keyboard: Enter the bootloader by either: * **Physical reset button**: Briefly press the button on the front of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/hillside/46/readme.md b/keyboards/handwired/hillside/46/readme.md index 8765c8029e..f1c9483cab 100644 --- a/keyboards/handwired/hillside/46/readme.md +++ b/keyboards/handwired/hillside/46/readme.md @@ -24,6 +24,6 @@ Flashing example for this keyboard: Enter the bootloader by either: * **Physical reset button**: Briefly press the button on the front of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/hillside/52/readme.md b/keyboards/handwired/hillside/52/readme.md index 62ca08ad67..3878bc062a 100644 --- a/keyboards/handwired/hillside/52/readme.md +++ b/keyboards/handwired/hillside/52/readme.md @@ -24,6 +24,6 @@ Flashing example for this keyboard: Enter the bootloader by either: * **Physical reset button**: Briefly press the button on the front of the PCB. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/lagrange/readme.md b/keyboards/handwired/lagrange/readme.md index 5d7f5bb08e..a4157771a4 100644 --- a/keyboards/handwired/lagrange/readme.md +++ b/keyboards/handwired/lagrange/readme.md @@ -16,6 +16,6 @@ Flashing example for this keyboard: make handwired/lagrange:default:flash -To program the keyboard you'll need to reset it. This can be accomplished, either through the reset button, accessible via a hole in the bottom cover, or, if you've assigned the `RESET` keycode to a key, by pressing that key. +To program the keyboard you'll need to reset it. This can be accomplished, either through the reset button, accessible via a hole in the bottom cover, or, if you've assigned the `QK_BOOT` keycode to a key, by pressing that key. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/lemonpad/readme.md b/keyboards/handwired/lemonpad/readme.md index 4c1c2082e9..788bca6b43 100644 --- a/keyboards/handwired/lemonpad/readme.md +++ b/keyboards/handwired/lemonpad/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/m40/5x5_macropad/readme.md b/keyboards/handwired/m40/5x5_macropad/readme.md index 7ce38d6593..457b8cf4ee 100644 --- a/keyboards/handwired/m40/5x5_macropad/readme.md +++ b/keyboards/handwired/m40/5x5_macropad/readme.md @@ -23,4 +23,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 2 ways: * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available. In default layout (if you flashed it already once) it is the top-right button. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. In default layout (if you flashed it already once) it is the top-right button. diff --git a/keyboards/handwired/macroboard/readme.md b/keyboards/handwired/macroboard/readme.md index ee2351f99f..ea32085bc0 100644 --- a/keyboards/handwired/macroboard/readme.md +++ b/keyboards/handwired/macroboard/readme.md @@ -24,4 +24,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available, by default 5th column, 5th row +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available, by default 5th column, 5th row diff --git a/keyboards/handwired/meck_tkl/readme.md b/keyboards/handwired/meck_tkl/readme.md index ec09047dde..9db9cd222f 100644 --- a/keyboards/handwired/meck_tkl/readme.md +++ b/keyboards/handwired/meck_tkl/readme.md @@ -24,7 +24,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available ## Wiring instructions diff --git a/keyboards/handwired/snatchpad/readme.md b/keyboards/handwired/snatchpad/readme.md index 98021cc6bd..9e502579b5 100644 --- a/keyboards/handwired/snatchpad/readme.md +++ b/keyboards/handwired/snatchpad/readme.md @@ -31,4 +31,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/swiftrax/bumblebee/readme.md b/keyboards/handwired/swiftrax/bumblebee/readme.md index 32091cb83b..343fb81bf8 100644 --- a/keyboards/handwired/swiftrax/bumblebee/readme.md +++ b/keyboards/handwired/swiftrax/bumblebee/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/handwired/swiftrax/digicarp65/readme.md b/keyboards/handwired/swiftrax/digicarp65/readme.md index 619ec519f0..34e0c0b755 100644 --- a/keyboards/handwired/swiftrax/digicarp65/readme.md +++ b/keyboards/handwired/swiftrax/digicarp65/readme.md @@ -17,5 +17,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key)and plug in the keyboard -* **Physical reset button**: Briefly short the pad on the back of the PCB labeled RESET -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Physical reset button**: Briefly short the pad on the back of the PCB labeled QK_BOOT +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/swiftrax/digicarpice/readme.md b/keyboards/handwired/swiftrax/digicarpice/readme.md index 228db23a7f..d9deec7dc7 100644 --- a/keyboards/handwired/swiftrax/digicarpice/readme.md +++ b/keyboards/handwired/swiftrax/digicarpice/readme.md @@ -12,7 +12,7 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard * **Physical reset button**: short the pads on the back of the pcb -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/handwired/swiftrax/glacier/readme.md b/keyboards/handwired/swiftrax/glacier/readme.md index 36588e000e..e09c179ae9 100644 --- a/keyboards/handwired/swiftrax/glacier/readme.md +++ b/keyboards/handwired/swiftrax/glacier/readme.md @@ -9,7 +9,7 @@ ## Bootloader Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead - * **Keycode in layout**: Press the key mapped to `RESET` if it is available + * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available Make example for flashing this keyboard (after setting up your build environment): diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md index f732295ba3..6b98bdc9b9 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md @@ -35,4 +35,4 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to * **Bootmagic reset**: Hold down the top right key on the right side, or the top left key on the left side while plugging in. * **Physical reset button**: Briefly press the "USER" button on the BlackPill -* **Keycode in layout**: Press the key mapped to `RESET`. +* **Keycode in layout**: Press the key mapped to `QK_BOOT`. diff --git a/keyboards/handwired/tractyl_manuform/readme.md b/keyboards/handwired/tractyl_manuform/readme.md index e78fd2ee06..576a7cc74e 100644 --- a/keyboards/handwired/tractyl_manuform/readme.md +++ b/keyboards/handwired/tractyl_manuform/readme.md @@ -22,4 +22,4 @@ Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/wakizashi40/readme.md b/keyboards/handwired/wakizashi40/readme.md index 8bb6c2aebc..b419f5032b 100644 --- a/keyboards/handwired/wakizashi40/readme.md +++ b/keyboards/handwired/wakizashi40/readme.md @@ -18,4 +18,4 @@ See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available -- cgit v1.2.3