From 2e5bf25d65bfe3c1ff40046b0787a3c2af43dfcc Mon Sep 17 00:00:00 2001 From: Joe Scotto Date: Fri, 7 Jul 2023 10:14:41 -0400 Subject: Add ScottoAlp Keyboard (#20937) --- .../handwired/scottokeebs/scottoalp/readme.md | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/handwired/scottokeebs/scottoalp/readme.md (limited to 'keyboards/handwired/scottokeebs/scottoalp/readme.md') diff --git a/keyboards/handwired/scottokeebs/scottoalp/readme.md b/keyboards/handwired/scottokeebs/scottoalp/readme.md new file mode 100644 index 0000000000..07c7d889de --- /dev/null +++ b/keyboards/handwired/scottokeebs/scottoalp/readme.md @@ -0,0 +1,27 @@ +# ScottoAlp + +![ScottoAlp](https://i.imgur.com/XKpYcMgh.jpeg) + +A 35-key ortholinear keyboard with a 3u spacebar and is compatible with both MX or Alps. Case files available [here](https://github.com/joe-scotto/scottokeebs). + +* Keyboard Maintainer: [Joe Scotto](https://github.com/joe-scotto) +* Hardware Supported: ATmega32U4 +* Hardware Availability: [Amazon](https://amazon.com) + +Make example for this keyboard (after setting up your build environment): + + make handwired/jscotto/scottoalp:default + +Flashing example for this keyboard: + + make handwired/jscotto/scottoalp:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file -- cgit v1.2.3