From 26eef35f07698d23aafae90e1c230b52e100a334 Mon Sep 17 00:00:00 2001 From: James Young Date: Sat, 29 Feb 2020 12:00:00 -0800 Subject: 2020 February 29 Breaking Changes Update (#8064) --- keyboards/gon/nerd60/readme.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/gon/nerd60/readme.md (limited to 'keyboards/gon/nerd60/readme.md') diff --git a/keyboards/gon/nerd60/readme.md b/keyboards/gon/nerd60/readme.md new file mode 100644 index 0000000000..1b4689ea03 --- /dev/null +++ b/keyboards/gon/nerd60/readme.md @@ -0,0 +1,27 @@ +# GON NerD 60 + +A Korean Custom 60%. + +* Keyboard Maintainer: QMK Community +* Hardware Supported: GON NerD 60 PCB +* Hardware Availability: [gonskeyboardworks.com](http://www.gonskeyboardworks.com/pcbs-and-controllers/113-nerd-60-ver20-pcb.html) + +Make example for this keyboard (after setting up your build environment): + + make gon/nerd60:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Changing Bootloader + +It's not possible to simply flash this firmware on the GON NerD keyboard as the original bootloader does not support DFU connections. + +It is possible to change the bootloader of the GON NerD with an ISP programmer. A guide on how to change the bootloader on your GON NerD can be found here: +[Converting NerD60 to TMK](https://deskthority.net/wiki/Converting_NerD60_to_TMK). After changing the bootloader you can flash your QMK keymap onto the keyboard. + +_After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will +not work anymore. You will lose your warranty and official support from GON!_ + +## Reset button + +To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `RESET` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins. -- cgit v1.2.3