From 83fa6fe916bfd7d337f05d7805f0a51ad86c8b43 Mon Sep 17 00:00:00 2001 From: GloriousThrall <74627436+GloriousThrall@users.noreply.github.com> Date: Thu, 19 May 2022 19:47:22 -0500 Subject: Move GMMK Pro to allow for multiple revisions (#16423) * Added GMMK PRO Rev2 WBG7 MCU compatibility. Added GMMK 2 WBG7 MCU compatibility. * GMMK PRO MCU Updates only (removed other kbs) * fix problems * Optimize the code. * Update form develop branch * Update * Updater from qmk/develop * Update * Update config.h * Update config.h * Remove gmmk pro rev2 * move moults31/keymap.c * Update * tidy up Co-authored-by: Joy Co-authored-by: zvecr --- keyboards/gmmk/pro/rev1/ansi/readme.md | 37 ++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 keyboards/gmmk/pro/rev1/ansi/readme.md (limited to 'keyboards/gmmk/pro/rev1/ansi/readme.md') diff --git a/keyboards/gmmk/pro/rev1/ansi/readme.md b/keyboards/gmmk/pro/rev1/ansi/readme.md new file mode 100644 index 0000000000..c6721b026a --- /dev/null +++ b/keyboards/gmmk/pro/rev1/ansi/readme.md @@ -0,0 +1,37 @@ +# GMMK PRO (ANSI) + +A tenkeyless 75% keyboard made and sold by Glorious LLC. Equipped with the STM32 ARM Cortex-M4 microcontroller, with support for rotary encoders and three additional layouts. [More info at Glorious](https://www.pcgamingrace.com/products/glorious-gmmk-pro-75-barebone-black-reservation) + +* Keyboard Maintainer: [GloriousThrall](https://github.com/GloriousThrall) +* Hardware Supported: GMMK Pro +* Hardware Availability: [GloriousPCGaming.com](https://www.pcgamingrace.com/products/glorious-gmmk-pro-75-barebone-black-reservation) + +Make example for this keyboard (after setting up your build environment): + + make gmmk/pro/rev1/ansi:default + +Flashing example for this keyboard: + + make gmmk/pro/rev1/ansi:default:flash + +To reset the board into bootloader mode, do one of the following: + +* Hold the Reset switch mounted on the bottom side of the PCB while connecting the USB cable +* Hold the Escape key while connecting the USB cable (also erases persistent settings) +* Fn+Backslash will reset the board to bootloader mode if you have flashed the default QMK keymap + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Case Screw Replacements + +Many users report stripped case screws when disassembling the board. + +The stock case screws are: +* Thread: M2 +* Thread length: ~5 mm +* Head diameter: ~3.8 mm +* Head counterbore diameter: ~4.0 mm +* Head counterbore depth: ~1.9 mm + +Most M2x5mm screws should fit fine, although it's best to ensure that the screw head will fit inside the counterbore. +For reference, [this hex socket head screw](https://www.mcmaster.com/91292A005/) from McMaster-Carr should fit nearly flush (head will protrude above the counterbore by ~0.1 mm). -- cgit v1.2.3