From b994921703190886714a4b2df2a674265e586b59 Mon Sep 17 00:00:00 2001 From: Gigahawk Date: Mon, 19 Jul 2021 17:57:19 -0700 Subject: [Keyboard] Split GMMK Pro PCBs into separate revisions (#13570) Co-authored-by: Drashna Jaelre --- keyboards/gmmk/pro/iso/readme.md | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 keyboards/gmmk/pro/iso/readme.md (limited to 'keyboards/gmmk/pro/iso/readme.md') diff --git a/keyboards/gmmk/pro/iso/readme.md b/keyboards/gmmk/pro/iso/readme.md new file mode 100644 index 0000000000..3f255c490e --- /dev/null +++ b/keyboards/gmmk/pro/iso/readme.md @@ -0,0 +1,23 @@ +# GMMK PRO (ISO) + +A tenkeyless 75% keyboard made and sold by Glorious LLC. Equipped with the STM32 ARM Cortex-M4 microcontroller, with support for rotary encoders and three additional layouts. [More info at Glorious](https://www.pcgamingrace.com/products/glorious-gmmk-pro-75-barebone-black-reservation) + +* Keyboard Maintainer: [GloriousThrall](https://github.com/GloriousThrall) +* Hardware Supported: GMMK Pro +* Hardware Availability: [GloriousPCGaming.com](https://www.pcgamingrace.com/products/glorious-gmmk-pro-75-barebone-black-reservation) + +Make example for this keyboard (after setting up your build environment): + + make gmmk/pro/iso:default + +Flashing example for this keyboard: + + make gmmk/pro/iso:default:flash + +To reset the board into bootloader mode, do one of the following: + +* Hold the Reset switch mounted on the bottom side of the PCB while connecting the USB cable +* Hold the Escape key while connecting the USB cable (also erases persistent settings) +* Fn+Backspace will reset the board to bootloader mode if you have flashed the default QMK keymap + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3 From 13b94b468d728f43b7edcd91224ea217851b80bc Mon Sep 17 00:00:00 2001 From: Gigahawk Date: Fri, 6 Aug 2021 15:11:17 -0700 Subject: Copy GMMK Pro screw specs to ISO readme (#13908) --- keyboards/gmmk/pro/iso/readme.md | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'keyboards/gmmk/pro/iso/readme.md') diff --git a/keyboards/gmmk/pro/iso/readme.md b/keyboards/gmmk/pro/iso/readme.md index 3f255c490e..62dbee5d0f 100644 --- a/keyboards/gmmk/pro/iso/readme.md +++ b/keyboards/gmmk/pro/iso/readme.md @@ -21,3 +21,17 @@ To reset the board into bootloader mode, do one of the following: * Fn+Backspace will reset the board to bootloader mode if you have flashed the default QMK keymap See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Case Screw Replacements + +Many users report stripped case screws when disassembling the board. + +The stock case screws are: +* Thread: M2 +* Thread length: ~5 mm +* Head diameter: ~3.8 mm +* Head counterbore diameter: ~4.0 mm +* Head counterbore depth: ~1.9 mm + +Most M2x5mm screws should fit fine, although it's best to ensure that the screw head will fit inside the counterbore. +For reference, [this hex socket head screw](https://www.mcmaster.com/91292A005/) from McMaster-Carr should fit nearly flush (head will protrude above the counterbore by ~0.1 mm). -- cgit v1.2.3