From 73883425a55f23a319eb1522c2e3ce52b8e2f042 Mon Sep 17 00:00:00 2001 From: zvecr Date: Thu, 8 Nov 2018 23:17:41 +0000 Subject: relocate 40percent.club boards to new parent folder (#4380) * Initial move of 40percent.club boards to common parent folder. * Refactor readme files to be consistent * Refactor readme files to be consistent - fix make command examples. * Refactor readme files to be consistent - align readme filenames. * Refactor readme files to be consistent - fix repo url. * Disable Community keymap builds as they are currently failing due to missing functionality * Move more of 40percent.club boards to common parent folder. * Refactor readme files to be consistent - align readme filenames. * Refactor readme files to be consistent - fix make command examples. --- keyboards/gherkin/README.md | 18 -- keyboards/gherkin/config.h | 54 ---- keyboards/gherkin/gherkin.c | 1 - keyboards/gherkin/gherkin.h | 18 -- keyboards/gherkin/info.json | 13 - keyboards/gherkin/keymaps/bbaserdem/README.md | 11 - keyboards/gherkin/keymaps/bbaserdem/config.h | 13 - keyboards/gherkin/keymaps/bbaserdem/keymap.c | 36 --- keyboards/gherkin/keymaps/bbaserdem/rules.mk | 17 -- keyboards/gherkin/keymaps/default/keymap.c | 74 ------ keyboards/gherkin/keymaps/itsaferbie/config.h | 15 -- keyboards/gherkin/keymaps/itsaferbie/keymap.c | 152 ----------- keyboards/gherkin/keymaps/itsaferbie/rules.mk | 7 - keyboards/gherkin/keymaps/mjt/config.h | 169 ------------- keyboards/gherkin/keymaps/mjt/keymap.c | 279 --------------------- keyboards/gherkin/keymaps/mjt/rules.mk | 29 --- keyboards/gherkin/keymaps/steno/config.h | 12 - keyboards/gherkin/keymaps/steno/keymap.c | 13 - keyboards/gherkin/keymaps/steno/readme.md | 9 - keyboards/gherkin/keymaps/steno/rules.mk | 16 -- keyboards/gherkin/keymaps/talljoe-gherkin/config.h | 6 - keyboards/gherkin/keymaps/talljoe-gherkin/keymap.c | 58 ----- keyboards/gherkin/keymaps/talljoe-gherkin/rules.mk | 6 - keyboards/gherkin/rules.mk | 59 ----- 24 files changed, 1085 deletions(-) delete mode 100644 keyboards/gherkin/README.md delete mode 100644 keyboards/gherkin/config.h delete mode 100644 keyboards/gherkin/gherkin.c delete mode 100644 keyboards/gherkin/gherkin.h delete mode 100644 keyboards/gherkin/info.json delete mode 100644 keyboards/gherkin/keymaps/bbaserdem/README.md delete mode 100644 keyboards/gherkin/keymaps/bbaserdem/config.h delete mode 100644 keyboards/gherkin/keymaps/bbaserdem/keymap.c delete mode 100644 keyboards/gherkin/keymaps/bbaserdem/rules.mk delete mode 100644 keyboards/gherkin/keymaps/default/keymap.c delete mode 100644 keyboards/gherkin/keymaps/itsaferbie/config.h delete mode 100644 keyboards/gherkin/keymaps/itsaferbie/keymap.c delete mode 100644 keyboards/gherkin/keymaps/itsaferbie/rules.mk delete mode 100644 keyboards/gherkin/keymaps/mjt/config.h delete mode 100644 keyboards/gherkin/keymaps/mjt/keymap.c delete mode 100644 keyboards/gherkin/keymaps/mjt/rules.mk delete mode 100644 keyboards/gherkin/keymaps/steno/config.h delete mode 100644 keyboards/gherkin/keymaps/steno/keymap.c delete mode 100644 keyboards/gherkin/keymaps/steno/readme.md delete mode 100644 keyboards/gherkin/keymaps/steno/rules.mk delete mode 100644 keyboards/gherkin/keymaps/talljoe-gherkin/config.h delete mode 100644 keyboards/gherkin/keymaps/talljoe-gherkin/keymap.c delete mode 100644 keyboards/gherkin/keymaps/talljoe-gherkin/rules.mk delete mode 100644 keyboards/gherkin/rules.mk (limited to 'keyboards/gherkin') diff --git a/keyboards/gherkin/README.md b/keyboards/gherkin/README.md deleted file mode 100644 index 5e0daeabf9..0000000000 --- a/keyboards/gherkin/README.md +++ /dev/null @@ -1,18 +0,0 @@ -Gherkin -=== - -A 30 key keyboard. - -* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/gherkin) - -Keyboard Maintainer: QMK Community -Hardware Supported: Gherkin PCB -Hardware Availability: [Gherkin project on 40% Keyboards](http://www.40percent.club/2016/11/gherkin.html) - -Make example for this keyboard (after setting up your build environment): - - make gherkin:default - -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. -First pass at adding support for the gherkin keyboard. Compiles but completely -untested. Intended to kick-start development. diff --git a/keyboards/gherkin/config.h b/keyboards/gherkin/config.h deleted file mode 100644 index 34f38e35c2..0000000000 --- a/keyboards/gherkin/config.h +++ /dev/null @@ -1,54 +0,0 @@ -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER 40 Percent Club -#define PRODUCT Gherkin -#define DESCRIPTION A 30 key ortholinear keyboard - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 6 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } -#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* number of backlight levels */ -#define BACKLIGHT_PIN B5 -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 3 -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 0 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#endif - -#endif diff --git a/keyboards/gherkin/gherkin.c b/keyboards/gherkin/gherkin.c deleted file mode 100644 index 2952d842cf..0000000000 --- a/keyboards/gherkin/gherkin.c +++ /dev/null @@ -1 +0,0 @@ -#include "gherkin.h" diff --git a/keyboards/gherkin/gherkin.h b/keyboards/gherkin/gherkin.h deleted file mode 100644 index f8674be40e..0000000000 --- a/keyboards/gherkin/gherkin.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef GHERKIN_H -#define GHERKIN_H - -#include "quantum.h" - -#define LAYOUT_ortho_3x10( \ - K00, K01, K02, K03, K04, K05, K10, K11, K12, K13 , \ - K14, K15, K20, K21, K22, K23, K24, K25, K30, K31 , \ - K32, K33, K34, K35, K40, K41, K42, K43, K44, K45 \ -) { \ - { K00, K01, K02, K03, K04, K05 }, \ - { K10, K11, K12, K13, K14, K15 }, \ - { K20, K21, K22, K23, K24, K25 }, \ - { K30, K31, K32, K33, K34, K35 }, \ - { K40, K41, K42, K43, K44, K45 } \ -} - -#endif diff --git a/keyboards/gherkin/info.json b/keyboards/gherkin/info.json deleted file mode 100644 index 7ebbfb04be..0000000000 --- a/keyboards/gherkin/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "Gherkin", - "url": "", - "maintainer": "qmk", - "width": 10, - "height": 3, - "layouts": { - "LAYOUT_ortho_3x10": { - "key_count": 30, - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}] - } - } -} diff --git a/keyboards/gherkin/keymaps/bbaserdem/README.md b/keyboards/gherkin/keymaps/bbaserdem/README.md deleted file mode 100644 index 3c9a5e98b3..0000000000 --- a/keyboards/gherkin/keymaps/bbaserdem/README.md +++ /dev/null @@ -1,11 +0,0 @@ -# Gherkin Layout -This is my gherkin layout. -It is used as a game pad, and key layout is inspired by spare keys I had lying around. -The firmware is very simple, and only includes one layer keymap, and RGB effects. - -# Flashing -The following command should be used from the main qmk directory. -``` -make gherkin:bbaserdem -sudo avrdude -p atmgea34u4 -P `ls /dev/ttyACM*` -c avr109 -U flash:.build/gherkin_bbaserdem.hex -``` diff --git a/keyboards/gherkin/keymaps/bbaserdem/config.h b/keyboards/gherkin/keymaps/bbaserdem/config.h deleted file mode 100644 index 37d7113e78..0000000000 --- a/keyboards/gherkin/keymaps/bbaserdem/config.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef CONFIG_KEYMAP_H -#define CONFIG_KEYMAP_H - -#include "../../config.h" -#define RGB_DI_PIN F6 -#define RGBLED_NUM 10 -#define RGBLIGHT_ANIMATIONS -#ifdef BACKLIGHT_LEVELS -#undef BACKLIGHT_LEVELS -#endif -#define BACKLIGHT_LEVELS 3 - -#endif diff --git a/keyboards/gherkin/keymaps/bbaserdem/keymap.c b/keyboards/gherkin/keymaps/bbaserdem/keymap.c deleted file mode 100644 index 0d3c8557c5..0000000000 --- a/keyboards/gherkin/keymaps/bbaserdem/keymap.c +++ /dev/null @@ -1,36 +0,0 @@ -// This is a game-pad gherkin layout with RGB and LED lights - -#include QMK_KEYBOARD_H - -backlight_config_t backlight_config; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Game pad - * ,-----------------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | Ctl | Alt | ~ | - * |-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| - * | Tab | Q | W | E | R | T | |^| | ; | ' | / | - * |-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| - * | Shf | A | S | D | F | <-- | |v| | --> | , | . | - * `-----------------------------------------------------------' - */ - LAYOUT_ortho_3x10( - KC_ESCAPE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_LCTRL, KC_LALT, KC_GRAVE, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_UP, KC_SCLN, KC_QUOTE, KC_SLASH, - KC_LSHIFT, KC_A, KC_S, KC_D, KC_F, KC_LEFT, KC_DOWN, KC_RIGHT, KC_COMMA, KC_DOT - ) -}; - -void matrix_init_user(void) { - // Set LED's to max - _delay_us(300); - backlight_config.level = 2; - backlight_config.enable = 1; - eeconfig_update_backlight(backlight_config.raw); - backlight_set(backlight_config.level); - // Set RGB to rainbow mood light - rgblight_enable(); - rgblight_mode(1); - rgblight_sethsv(120,255,255); - rgblight_mode(6); -} diff --git a/keyboards/gherkin/keymaps/bbaserdem/rules.mk b/keyboards/gherkin/keymaps/bbaserdem/rules.mk deleted file mode 100644 index cd1cddebf4..0000000000 --- a/keyboards/gherkin/keymaps/bbaserdem/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -ifndef QUANTUM_DIR - include ../../../../Makefile -endif - -USER_NAME := bbaserdem-nouserspace - -STENO_ENABLE = no # Additional protocols for Stenography(+1700), requires VIRTSER -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -AUDIO_ENABLE = no # Enable audio output from keyboard - -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable RBG light strips -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality diff --git a/keyboards/gherkin/keymaps/default/keymap.c b/keyboards/gherkin/keymaps/default/keymap.c deleted file mode 100644 index f018200304..0000000000 --- a/keyboards/gherkin/keymaps/default/keymap.c +++ /dev/null @@ -1,74 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _______ KC_TRNS -#define FN1_Q LT(1, KC_Q) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [0] = LAYOUT_ortho_3x10( - FN1_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ESC, - KC_Z, KC_X, KC_C, KC_V, KC_BSPC, KC_SPC, KC_B, KC_N, KC_M, KC_ENT - ), - - [1] = LAYOUT_ortho_3x10( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_INC, - _______, _______, _______, _______, _______, _______, RESET, _______, _______, BL_DEC - ), - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - keyevent_t event = record->event; - (void)event; - - switch (id) { - - } - return MACRO_NONE; -} - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - DDRD |= (1 << 5); PORTD &= ~(1 << 5); - } else { - DDRD &= ~(1 << 5); PORTD &= ~(1 << 5); - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 0); PORTB &= ~(1 << 0); - } else { - DDRB &= ~(1 << 0); PORTB &= ~(1 << 0); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/gherkin/keymaps/itsaferbie/config.h b/keyboards/gherkin/keymaps/itsaferbie/config.h deleted file mode 100644 index 71c0cb8b56..0000000000 --- a/keyboards/gherkin/keymaps/itsaferbie/config.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#undef RGB_DI_PIN -#undef RGBLED_NUM -#define RGB_DI_PIN D2 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - -#endif \ No newline at end of file diff --git a/keyboards/gherkin/keymaps/itsaferbie/keymap.c b/keyboards/gherkin/keymaps/itsaferbie/keymap.c deleted file mode 100644 index 580b041c9c..0000000000 --- a/keyboards/gherkin/keymaps/itsaferbie/keymap.c +++ /dev/null @@ -1,152 +0,0 @@ -#include QMK_KEYBOARD_H - -extern rgblight_config_t rgblight_config; -extern keymap_config_t keymap_config; - -#define _PS 0 // This is the Photoshop Layer -#define _AI 1 // This is the Illustrator Layer -#define _PR 2 // This is the Premier Layer -#define _XD 3 // This is the Experience Design Layer - -enum custom_keycodes { - PS = SAFE_RANGE, - AI, - PR, -}; - -#define _______ KC_TRNS - -#define PS TO(0) -#define AI TO(1) -#define PR TO(2) -#define XD TO(3) - -// Mix of Photoshop, Illustrator, Premiere, and Experience Design shortcuts. -#define SAVE LCTL(KC_S) -#define OPEN LCTL(KC_O) -#define COPY LCTL(KC_C) -#define PAST LCTL(KC_V) -#define CUNDO LCTL(LALT(KC_Z)) -#define INVERT LCTL(LSFT(KC_I)) -#define NLAYER LSFT(LCTL(KC_N)) -#define UNDO LCTL(KC_Z) -#define TRANS LCTL(KC_T) -#define ALIGNL LCTL(LSFT(KC_L)) -#define ALIGNC LCTL(LSFT(KC_C)) -#define ALIGNR LCTL(LSFT(KC_R)) -#define BRINGF LCTL(KC_RBRC) -#define BRINGB LCTL(KC_LBRC) - -// Illustrator layer shortcuts. -#define SHAPE LSFT(KC_M) -#define RULER LCTL(LALT(KC_R)) - -// Premiere layer shortcuts. -#define REDO LCTL(LSFT(KC_Z)) -#define EXPORT LCTL(KC_M) -#define IMPORT LCTL(KC_I) -#define PCOPY LCTL(KC_V) -#define PPASTE LCTL(LSFT(KC_V)) - -// Experience Design layer shortcuts. (can be used with others too.) -#define NEW LCTL(KC_N) -#define LOCK LCTL(KC_L) -#define SYMB LCTL(KC_K) -#define HIDE LCTL(KC_SCLN) -#define REPEAT LCTL(KC_R) -#define MASK LCTL(LSFT(KC_M)) -#define GROUP LCTL(KC_G) -#define UNGRP LCTL(LSFT(KC_G)) -#define VIEW LCTL(KC_TAB) -#define HORZ LSFT(KC_C) -#define VERT LSFT(KC_M) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - // Photoshop layer - [_PS] = LAYOUT_ortho_3x10( - SAVE, KC_W, KC_E, KC_T, KC_U, KC_I, KC_P, INVERT, CUNDO, NLAYER, - UNDO, KC_H, KC_L, TRANS, ALIGNL, ALIGNC, ALIGNR, BRINGB, BRINGF, OPEN, - KC_LSFT, COPY, PAST, KC_Z, KC_C, KC_V, KC_B, KC_LBRC, KC_RBRC, AI - ), - - // Illustrator layer - [_AI] = LAYOUT_ortho_3x10( - _______, M(0), RULER, _______, KC_G, _______, _______, KC_Q, KC_MINS, KC_PLUS, - _______, _______, _______, KC_E, _______, _______, _______, SHAPE, KC_O, OPEN, - _______, _______, _______, _______, _______, _______, _______, KC_M, KC_SLSH, PR - ), - - // Premiere layer - [_PR] = LAYOUT_ortho_3x10( - _______, KC_Q, KC_W, KC_I, KC_O, KC_P, IMPORT, EXPORT, KC_MINS, KC_EQL, - _______, REDO, KC_D, KC_F, KC_H, KC_M, KC_ENT, KC_LBRC, KC_RBRC, OPEN, - _______, PCOPY, PPASTE, KC_SPC, KC_Z, KC_C, KC_V, KC_LEFT, KC_RIGHT, XD - ), - - // Experience Design layer - [_XD] = LAYOUT_ortho_3x10( - _______, KC_E, KC_R, KC_T, KC_P, KC_A, KC_L, KC_V, KC_DEL, NEW, - _______, REDO, GROUP, UNGRP, VIEW, HORZ, VERT, KC_Z, KC_ENT, OPEN, - _______, KC_LCTL, COPY, PAST, SYMB, LOCK, MASK, HIDE, REPEAT, PS - ), - -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -void matrix_init_user(void) { - rgblight_enable(); -} - -void matrix_scan_user(void) { - #ifdef RGBLIGHT_ENABLE - - static uint8_t old_layer = 255; - uint8_t new_layer = biton32(layer_state); - - // Color of the Icons. - if (old_layer != new_layer) { - switch (new_layer) { - case _PS: - // #31C5F0 - rgblight_setrgb(49, 197, 240); - break; - case _AI: - // #FF8011 - rgblight_setrgb(255, 128, 17); - break; - case _PR: - // #E788FF - rgblight_setrgb(231, 136, 255); - break; - case _XD: - // #FF2BC2 - rgblight_setrgb(255, 43, 194); - break; - } - old_layer = new_layer; - } - #endif -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - keyevent_t event = record->event; - (void)event; - - switch (id) { - case 0: - // Save for Web Macro. - return MACRO(D(LSFT), D(LALT), D(LCTL), T(S), U(LCTL), U(LALT), U(LSFT), END); - } - return MACRO_NONE; -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - } - return true; -} diff --git a/keyboards/gherkin/keymaps/itsaferbie/rules.mk b/keyboards/gherkin/keymaps/itsaferbie/rules.mk deleted file mode 100644 index ed0af7b8bd..0000000000 --- a/keyboards/gherkin/keymaps/itsaferbie/rules.mk +++ /dev/null @@ -1,7 +0,0 @@ -BACKLIGHT_ENABLE = yes -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif \ No newline at end of file diff --git a/keyboards/gherkin/keymaps/mjt/config.h b/keyboards/gherkin/keymaps/mjt/config.h deleted file mode 100644 index bb59ec213d..0000000000 --- a/keyboards/gherkin/keymaps/mjt/config.h +++ /dev/null @@ -1,169 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Some Guy -#define PRODUCT Gherkin -#define DESCRIPTION 30 percent disaster - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 6 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ - -// These are with USB on the left. -// #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } -// original from TMK: #define MATRIX_COL_PINS { D0, D4, C6, D7, E6, B4 } -// #define MATRIX_COL_PINS { D0, D4, F6, D7, E6, B4 } - -// these are with USB on the right. -#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } -#define MATRIX_COL_PINS { B4, E6, D7, F6, D4, D0 } - -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 -#define BACKLIGHT_PIN B5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define AUDIO_VOICES - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/gherkin/keymaps/mjt/keymap.c b/keyboards/gherkin/keymaps/mjt/keymap.c deleted file mode 100644 index 2b4369c34f..0000000000 --- a/keyboards/gherkin/keymaps/mjt/keymap.c +++ /dev/null @@ -1,279 +0,0 @@ -#include QMK_KEYBOARD_H -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif - -extern keymap_config_t keymap_config; - -//Tap Dance Declarations -enum { - TD_Z_LCTL = 0, - TD_X_LGUI = 1, - TD_C_LALT = 2, - TD_A_TAB = 3, - TD_Q_ESC = 4, -// M(0) -}; - -//Friendly Layer Names -enum gherkin_layers { - _QWERTY, - _SONGS, - _NUMBERS, - _SYMBOLS, - _PLOVER, - _ADJUST -}; - -// custom keycodes -enum gherkin_keycodes { - QWERTY = SAFE_RANGE, - NUMBERS, - SYMBOLS, - SONGS, - PLOVER, - BACKLIT, - MACSLEEP, - EXT_PLV -}; - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_ortho_3x10( - TD(TD_Q_ESC), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, - TD(TD_A_TAB), LT(_SYMBOLS,KC_S), KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(_ADJUST,KC_SPC), - TD(TD_Z_LCTL), TD(TD_X_LGUI), TD(TD_C_LALT), KC_V, KC_B, LT(_NUMBERS, KC_N), KC_M, KC_COMM, KC_DOT, SFT_T(KC_ENT) - ), - [_NUMBERS] = LAYOUT_ortho_3x10( - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_HOME, KC_PGDN, KC_PGUP, KC_END , - KC_F7, KC_F8, KC_F9, KC_F10, LT(_ADJUST,KC_F11), _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT - ), - [_SYMBOLS] = LAYOUT_ortho_3x10( - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, - KC_GRV, _______, XXXXXXX, KC_LBRC, KC_RBRC, KC_BSLS, KC_MINS, KC_EQL , KC_SCLN, KC_QUOT, - KC_TILD, MO(_ADJUST), XXXXXXX, KC_LCBR, KC_RCBR, KC_PIPE, KC_UNDS, KC_PLUS, S(KC_SCLN), S(KC_QUOT) - ), - [_PLOVER] = LAYOUT_ortho_3x10( - KC_Q, KC_W, KC_E, KC_R, KC_1, KC_U, KC_I, KC_O, KC_P, KC_LBRC, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - EXT_PLV, XXXXXXX, KC_C, KC_V, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX - ), - [_ADJUST] = LAYOUT_ortho_3x10( - RESET, _______, _______, _______, _______, QWERTY, NUMBERS, SYMBOLS, PLOVER, SONGS, - MUV_DE, MUV_IN, MU_ON, MU_OFF, _______, _______, _______, _______, MACSLEEP, _______, - BACKLIT, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; - -#ifdef AUDIO_ENABLE - -float tone_startup[][2] = SONG(STARTUP_SOUND); -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float tone_dvorak[][2] = SONG(DVORAK_SOUND); -float tone_colemak[][2] = SONG(COLEMAK_SOUND); -float tone_plover[][2] = SONG(PLOVER_SOUND); -float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); -float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); - -float tone_goodbye[][2] = SONG(GOODBYE_SOUND); -#endif - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_qwerty); - #endif - persistant_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case NUMBERS: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_dvorak); - #endif - persistant_default_layer_set(1UL<<_NUMBERS); - } - return false; - break; - case SYMBOLS: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_colemak); - #endif - persistant_default_layer_set(1UL<<_SYMBOLS); - } - return false; - break; - case PLOVER: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - stop_all_notes(); - PLAY_SONG(tone_plover); - #endif - layer_off(_NUMBERS); - layer_off(_SYMBOLS); - layer_off(_ADJUST); - layer_on(_PLOVER); - if (!eeconfig_is_enabled()) { - eeconfig_init(); - } - keymap_config.raw = eeconfig_read_keymap(); - keymap_config.nkro = 1; - eeconfig_update_keymap(keymap_config.raw); - } - return false; - break; - case EXT_PLV: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_plover_gb); - #endif - layer_off(_PLOVER); - } - return false; - break; - case MACSLEEP: - if (record->event.pressed) { - // ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER); - register_code(KC_RSFT); - register_code(KC_RCTL); - register_code(KC_POWER); - unregister_code(KC_POWER); - unregister_code(KC_RCTL); - unregister_code(KC_RSFT); - } - return false; - break; - case BACKLIT: - if (record->event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } else { - unregister_code(KC_RSFT); - } - return false; - break; - } - return true; -} - - -/* -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - keyevent_t event = record->event; - - switch (id) { - case 0: { - if (record->event.pressed) { - key_timer = timer_read(); // if the key is being pressed, we start the timer. - } - else { // this means the key was just released, so we can figure out how long it was pressed for (tap or "held down"). - if (timer_elapsed(key_timer) > 150) { // 150 being 150ms, the threshhold we pick for counting something as a tap. - return MACRO( D(LSFT), END ); - } - else { - return MACRO( T(N), END ); - } - } - break; - } - } - return MACRO_NONE; -}*/ - -void matrix_init_user(void) { - #ifdef AUDIO_ENABLE - startup_user(); - #endif -} - -#ifdef AUDIO_ENABLE - -void startup_user() -{ - _delay_ms(20); // gets rid of tick - PLAY_SONG(tone_startup); -} - -void shutdown_user() -{ - PLAY_SONG(tone_goodbye); - _delay_ms(150); - stop_all_notes(); -} - -void music_on_user(void) -{ - music_scale_user(); -} - -void music_scale_user(void) -{ - PLAY_SONG(music_scale); -} - -#endif - -void matrix_scan_user(void) { -} - -//Tap Dance Definitions -qk_tap_dance_action_t tap_dance_actions[] = { - //Tap once for Esc, twice for Caps Lock - [TD_Z_LCTL] = ACTION_TAP_DANCE_DOUBLE(KC_Z, KC_LCTL), - [TD_X_LGUI] = ACTION_TAP_DANCE_DOUBLE(KC_X, KC_LGUI), - [TD_C_LALT] = ACTION_TAP_DANCE_DOUBLE(KC_C, KC_LALT), - [TD_A_TAB] = ACTION_TAP_DANCE_DOUBLE(KC_A, KC_TAB), - [TD_Q_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC) -}; - -// don't know what this is doing... -/* -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - DDRD |= (1 << 5); PORTD &= ~(1 << 5); - } else { - DDRD &= ~(1 << 5); PORTD &= ~(1 << 5); - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 0); PORTB &= ~(1 << 0); - } else { - DDRB &= ~(1 << 0); PORTB &= ~(1 << 0); - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} -*/ diff --git a/keyboards/gherkin/keymaps/mjt/rules.mk b/keyboards/gherkin/keymaps/mjt/rules.mk deleted file mode 100644 index afb93b674c..0000000000 --- a/keyboards/gherkin/keymaps/mjt/rules.mk +++ /dev/null @@ -1,29 +0,0 @@ -## not sure where this stuff goes ## -MCU = atmega32u4 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -TAP_DANCE_ENABLE=yes - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif diff --git a/keyboards/gherkin/keymaps/steno/config.h b/keyboards/gherkin/keymaps/steno/config.h deleted file mode 100644 index abacefa01d..0000000000 --- a/keyboards/gherkin/keymaps/steno/config.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#define NO_ACTION_LAYER -#define NO_ACTION_TAPPING -#define NO_ACTION_ONESHOT -#define NO_ACTION_MACRO -#define NO_ACTION_FUNCTION - -#endif \ No newline at end of file diff --git a/keyboards/gherkin/keymaps/steno/keymap.c b/keyboards/gherkin/keymaps/steno/keymap.c deleted file mode 100644 index c7ee63d126..0000000000 --- a/keyboards/gherkin/keymaps/steno/keymap.c +++ /dev/null @@ -1,13 +0,0 @@ -#include QMK_KEYBOARD_H -#include "keymap_steno.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - LAYOUT_ortho_3x10( - STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR , - STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR , - STN_NUM, STN_NUM, STN_A, STN_O, STN_NUM, STN_E, STN_U, STN_NUM, STN_NUM, STN_NUM), -}; - -void matrix_init_user() { - steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT -} \ No newline at end of file diff --git a/keyboards/gherkin/keymaps/steno/readme.md b/keyboards/gherkin/keymaps/steno/readme.md deleted file mode 100644 index 6536ed7aba..0000000000 --- a/keyboards/gherkin/keymaps/steno/readme.md +++ /dev/null @@ -1,9 +0,0 @@ -# Gherkin Steno - -This is a stenography-only keymap. It boots by default into GeminiPR mode. All the excess stuff is stripped away (I'd remove normal keyboard support if I could). - -> Note: The number bar has been moved to the bottom row in all the left-over spaces. - - | S | T | P | H | * | F | P | L | T | D | - | S | K | W | R | * | R | B | G | S | Z | - | # | # | A | O | # | E | U | # | # | # | diff --git a/keyboards/gherkin/keymaps/steno/rules.mk b/keyboards/gherkin/keymaps/steno/rules.mk deleted file mode 100644 index fa813f2099..0000000000 --- a/keyboards/gherkin/keymaps/steno/rules.mk +++ /dev/null @@ -1,16 +0,0 @@ -ifndef QUANTUM_DIR - include ../../../../Makefile -endif - -STENO_ENABLE = yes # Additional protocols for Stenography(+1700), requires VIRTSER - -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = no \ No newline at end of file diff --git a/keyboards/gherkin/keymaps/talljoe-gherkin/config.h b/keyboards/gherkin/keymaps/talljoe-gherkin/config.h deleted file mode 100644 index 7fa3bf328e..0000000000 --- a/keyboards/gherkin/keymaps/talljoe-gherkin/config.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#endif diff --git a/keyboards/gherkin/keymaps/talljoe-gherkin/keymap.c b/keyboards/gherkin/keymaps/talljoe-gherkin/keymap.c deleted file mode 100644 index ea2921924e..0000000000 --- a/keyboards/gherkin/keymaps/talljoe-gherkin/keymap.c +++ /dev/null @@ -1,58 +0,0 @@ -#include QMK_KEYBOARD_H -#include "keymap_steno.h" - -#define ST_BOLT QK_STENO_BOLT -#define ST_GEM QK_STENO_GEMINI - -#define XXXXXXX KC_NO - -enum keyboard_layers { - _QWERTY, - _RAISE, - _LOWER, - _PLOVER, - _ADJUST -}; - -#define ADJ_Z LT(_ADJUST, KC_Z) -#define RS_BSPC LT(_RAISE, KC_BSPC) -#define LW_SPC LT(_LOWER, KC_SPC) -#define MO_ADJ MO(_ADJUST) -#define TG_PLV TG(_PLOVER) -#define OS_LCTL OSM(MOD_LCTL) -#define OS_LALT OSM(MOD_LALT) -#define OS_LGUI OSM(MOD_LGUI) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_QWERTY] = LAYOUT_ortho_3x10( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_RSFT, - ADJ_Z, KC_X, KC_C, KC_V, RS_BSPC, LW_SPC, KC_B, KC_N, KC_M, KC_ENT - ), - - [_RAISE] = LAYOUT_ortho_3x10( - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_7, KC_9, KC_0, - KC_ESC, KC_MINS, KC_EQL, _______, KC_LBRC, KC_RBRC, _______, KC_QUOT, KC_SCLN, _______, - OS_LCTL, OS_LGUI, OS_LALT, KC_GRV, _______, KC_TAB, KC_BSLS, KC_COMM, KC_DOT, KC_SLSH - ), - - [_LOWER] = LAYOUT_ortho_3x10( - KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, KC_PGUP, KC_HOME, KC_UP, KC_END, XXXXXXX, - KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, _______, - KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, OS_LALT, OS_LGUI, OS_LCTL, KC_CAPS - ), - - [_PLOVER] = LAYOUT_ortho_3x10( - STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR, - STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR, - MO_ADJ, STN_NUM, STN_A, STN_O, STN_NUM, STN_E, STN_U, STN_NUM, STN_NUM, XXXXXXX - ), - - [_ADJUST] = LAYOUT_ortho_3x10( - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ST_BOLT, ST_GEM, TG_PLV, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET - ), - -}; diff --git a/keyboards/gherkin/keymaps/talljoe-gherkin/rules.mk b/keyboards/gherkin/keymaps/talljoe-gherkin/rules.mk deleted file mode 100644 index 02216ecb36..0000000000 --- a/keyboards/gherkin/keymaps/talljoe-gherkin/rules.mk +++ /dev/null @@ -1,6 +0,0 @@ -ifndef QUANTUM_DIR - include ../../../../Makefile -endif - -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -STENO_ENABLE = yes # Additional protocols for Stenography(+1700), requires VIRTSER diff --git a/keyboards/gherkin/rules.mk b/keyboards/gherkin/rules.mk deleted file mode 100644 index 416ca5e5f4..0000000000 --- a/keyboards/gherkin/rules.mk +++ /dev/null @@ -1,59 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = no - -LAYOUTS = ortho_3x10 -- cgit v1.2.3