From ae821ce4b77f873f5122747ee48c02778637bac6 Mon Sep 17 00:00:00 2001 From: Felix Jen Date: Wed, 15 Sep 2021 19:25:30 -0700 Subject: [Keyboard] Add FJLabs TF60 Variants and TF65 Variant (#14392) Co-authored-by: Ryan --- keyboards/fjlabs/tf60v2/readme.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/fjlabs/tf60v2/readme.md (limited to 'keyboards/fjlabs/tf60v2/readme.md') diff --git a/keyboards/fjlabs/tf60v2/readme.md b/keyboards/fjlabs/tf60v2/readme.md new file mode 100644 index 0000000000..22e624e68f --- /dev/null +++ b/keyboards/fjlabs/tf60v2/readme.md @@ -0,0 +1,27 @@ +# FJLabs TF60 RGB V2 + +The following is the QMK Firmware for the FJLabs TF60 RGB V2 PCB, a universal tray mount 60% hotswap PCB with per key RGB LED's. + +The PCB will feature: +* Kailh Hotswap sockets +* QMK & VIA compatibility +* Per-Key RGB LED's + +--- + +* Keyboard Maintainer: FJLabs +* Hardware Supported: TF60 RGB V2 + +Make example for this keyboard (after setting up your build environment): + + make fjlabs/tf60v2:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). Y + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file -- cgit v1.2.3