From 55f16167e4190f53076e4257bb4823c5bea79036 Mon Sep 17 00:00:00 2001 From: Felix Jen Date: Wed, 20 Jul 2022 08:01:35 -0700 Subject: Added Windz Sinanju to QMK (#17566) --- keyboards/fjlabs/sinanju/config.h | 103 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 103 insertions(+) create mode 100644 keyboards/fjlabs/sinanju/config.h (limited to 'keyboards/fjlabs/sinanju/config.h') diff --git a/keyboards/fjlabs/sinanju/config.h b/keyboards/fjlabs/sinanju/config.h new file mode 100644 index 0000000000..c0b22d5483 --- /dev/null +++ b/keyboards/fjlabs/sinanju/config.h @@ -0,0 +1,103 @@ +/* +Copyright 2022 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7074 // FJLabs +#define PRODUCT_ID 0x1022 // Sinanju +#define DEVICE_VER 0x0001 // Version 1 +#define MANUFACTURER FJLabs +#define PRODUCT Sinanju + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// Checked with Eagle Schematic +#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5 } +#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Define Indicator LED's */ +#define LED_CAPS_LOCK_PIN C7 + +/* Define less important options */ + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT -- cgit v1.2.3