From 9539f135d8161557f0ffdfecb6e8c8c8b09786a2 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Mon, 18 Dec 2023 13:53:02 +1100 Subject: Remove obvious user keymaps, `keyboards/[0-9]*` edition. (#22691) --- keyboards/ferris/keymaps/pierrec83/config.h | 55 ------------ keyboards/ferris/keymaps/pierrec83/keymap.json | 118 ------------------------- keyboards/ferris/keymaps/pierrec83/readme.md | 43 --------- 3 files changed, 216 deletions(-) delete mode 100644 keyboards/ferris/keymaps/pierrec83/config.h delete mode 100644 keyboards/ferris/keymaps/pierrec83/keymap.json delete mode 100644 keyboards/ferris/keymaps/pierrec83/readme.md (limited to 'keyboards/ferris/keymaps') diff --git a/keyboards/ferris/keymaps/pierrec83/config.h b/keyboards/ferris/keymaps/pierrec83/config.h deleted file mode 100644 index 1a4d15ff42..0000000000 --- a/keyboards/ferris/keymaps/pierrec83/config.h +++ /dev/null @@ -1,55 +0,0 @@ -/* -Copyright 2020 Pierre Chevalier - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once -// Set the mouse settings to a comfortable speed/accuracy trade-off, -// assuming a screen refresh rate of 60 Htz or higher -// The default is 50. This makes the mouse ~3 times faster and more accurate -#define MOUSEKEY_INTERVAL 16 -// The default is 20. Since we made the mouse about 3 times faster with the previous setting, -// give it more time to accelerate to max speed to retain precise control over short distances. -#define MOUSEKEY_TIME_TO_MAX 40 -// The default is 300. Let's try and make this as low as possible while keeping the cursor responsive -#define MOUSEKEY_DELAY 100 -// It makes sense to use the same delay for the mouseweel -#define MOUSEKEY_WHEEL_DELAY 100 -// The default is 100 -#define MOUSEKEY_WHEEL_INTERVAL 50 -// The default is 40 -#define MOUSEKEY_WHEEL_TIME_TO_MAX 100 - -// Pick good defaults for enabling homerow modifiers -#define TAPPING_TERM 200 -#define PERMISSIVE_HOLD -#define QUICK_TAP_TERM 0 - -// Underglow configuration -#ifdef RGBLIGHT_ENABLE -# define RGBLIGHT_EFFECT_BREATHING -# define RGBLIGHT_EFFECT_RAINBOW_MOOD -# define RGBLIGHT_EFFECT_RAINBOW_SWIRL -# define RGBLIGHT_EFFECT_SNAKE -# define RGBLIGHT_EFFECT_KNIGHT -# define RGBLIGHT_EFFECT_CHRISTMAS -# define RGBLIGHT_EFFECT_STATIC_GRADIENT -# define RGBLIGHT_EFFECT_RGB_TEST -# define RGBLIGHT_EFFECT_ALTERNATING -# define RGBLIGHT_EFFECT_TWINKLE -# define RGBLIGHT_HUE_STEP 8 -# define RGBLIGHT_SAT_STEP 8 -# define RGBLIGHT_VAL_STEP 8 -#endif diff --git a/keyboards/ferris/keymaps/pierrec83/keymap.json b/keyboards/ferris/keymaps/pierrec83/keymap.json deleted file mode 100644 index 2cbc47d912..0000000000 --- a/keyboards/ferris/keymaps/pierrec83/keymap.json +++ /dev/null @@ -1,118 +0,0 @@ -{ "version": 1, - "notes": "My awesome keymap", - "documentation": "\"This file is a QMK Configurator export. You can import this at . It can also be used directly with QMK's source code.\n\nTo setup your QMK environment check out the tutorial: \n\nYou can convert this file to a keymap.c using this command: `qmk json2c {keymap}`\n\nYou can compile this keymap using this command: `qmk compile {keymap}`\"\n", - "keyboard": "ferris/0_1", - "keymap": "pierrec83", - "layout": "LAYOUT", - "layers": [ - ["KC_Q" , "KC_D" , "KC_R" , "KC_W" , "KC_B", - "KC_J" , "KC_F" , "KC_U" , "KC_P" , "KC_SCLN", - - "LSFT_T(KC_A)" , "LT(6,KC_S)" , "LT(2,KC_H)" , "LT(4,KC_T)" , "KC_G", - "KC_Y" , "LT(5,KC_N)" , "LT(3,KC_E)" , "LT(7,KC_O)" , "LSFT_T(KC_I)", - - "KC_Z" , "LCTL_T(KC_X)" , "LALT_T(KC_M)" , "KC_C" , "KC_V", - "KC_K" , "KC_L" , "LALT_T(KC_COMM)", "LCTL_T(KC_DOT)" , "KC_SLSH", - - "LCA(KC_UP)" , "KC_BSPC", - "LT(8,KC_SPC)" , "LCA(KC_DOWN)" - ], - ["KC_Q" , "KC_C" , "KC_M" , "KC_Y" , "KC_COLN", - "KC_Z" , "KC_W" , "KC_COMM" , "KC_U" , "KC_J", - - "LSFT_T(KC_R)" , "LT(6,KC_S)" , "LT(2,KC_T)" , "LT(4,KC_H)" , "KC_X", - "KC_TRNS" , "LT(5,KC_N)" , "LT(3,KC_A)" , "LT(7,KC_I)" , "LSFT_T(KC_O)", - - "KC_B" , "LCTL_T(KC_F)" , "LALT_T(KC_G)" , "KC_D" , "KC_V", - "KC_ESC" , "KC_L" , "LALT_T(KC_DOT)" , "LCTL_T(KC_BSPC)" , "KC_K", - - "LCA(KC_UP)" , "KC_E", - "LT(8,KC_SPC)" , "LCA(KC_DOWN)" - ], - ["KC_TRNS" , "ANY(LCTL(LSFT(KC_C)))", "KC_TRNS" , "ANY(LCTL(LSFT(KC_V)))", "KC_TRNS", - "KC_TRNS" , "KC_BTN1" , "KC_WH_U" , "KC_BTN2" , "KC_TRNS", - - "KC_TRNS" , "KC_BTN2" , "KC_NO" , "KC_BTN1" , "KC_TRNS", - "KC_TRNS" , "KC_MS_L" , "KC_MS_D" , "KC_MS_U" , "KC_MS_R", - - "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", - "KC_TRNS" , "KC_WH_L" , "KC_WH_D" , "KC_WH_R" , "KC_TRNS", - - "ANY(LCTL(LSFT(KC_TAB)))", "KC_TRNS", - "KC_TRNS" , "LCTL(KC_TAB)" - ], - ["KC_TRNS" , "KC_TRNS" , "KC_PGUP" , "KC_TRNS" , "KC_TRNS", - "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", - - "KC_LEFT" , "KC_UP" , "KC_DOWN" , "KC_RGHT" , "KC_TRNS", - "KC_TRNS" , "KC_LGUI" , "KC_NO" , "LCTL(KC_LALT)" , "LCA(KC_LSFT)", - - "KC_TRNS" , "KC_HOME" , "KC_PGDN" , "KC_END" , "KC_TRNS", - "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", - - "RGB_RMOD" , "KC_TRNS", - "KC_TRNS" , "RGB_MOD" - ], - ["KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", - "KC_TRNS" , "KC_UNDS" , "KC_PIPE" , "KC_QUOT" , "KC_TRNS", - - "KC_CIRC" , "KC_ASTR" , "KC_AMPR" , "KC_NO" , "KC_TRNS", - "KC_HASH" , "KC_TILD" , "KC_SLSH" , "KC_DQUO" , "KC_DLR", - - "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", - "KC_TRNS" , "KC_MINS" , "KC_BSLS" , "KC_GRV" , "KC_TRNS", - - "KC_BRID" , "KC_TRNS", - "KC_TRNS" , "KC_BRIU" - ], - ["KC_TRNS" , "KC_COLN" , "KC_LT" , "KC_GT" , "KC_SCLN", - "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", - - "KC_LCBR" , "KC_RCBR" , "KC_LPRN" , "KC_RPRN" , "KC_AT", - "KC_TRNS" , "KC_NO" , "KC_EQL" , "KC_PLUS" , "KC_PERC", - - "KC_TRNS" , "KC_EXLM" , "KC_LBRC" , "KC_RBRC" , "KC_TRNS", - "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", - - "KC_VOLD" , "KC_TRNS", - "KC_TRNS" , "KC_VOLU" - ], - ["KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", - "KC_TRNS" , "KC_F7" , "KC_F8" , "KC_F9" , "KC_F10", - - "KC_TRNS" , "KC_TRNS" , "LCTL(KC_LALT)" , "KC_TRNS" , "KC_TRNS", - "KC_TRNS" , "KC_F4" , "KC_F5" , "KC_F6" , "KC_F11", - - "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", - "KC_TRNS" , "KC_F1" , "KC_F2" , "KC_F3" , "KC_F12", - - "KC_TRNS" , "KC_TRNS", - "KC_TRNS" , "KC_TRNS" - ], - ["KC_PSLS" , "KC_7" , "KC_8" , "KC_9" , "KC_PPLS", - "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", - - "KC_0" , "KC_1" , "KC_2" , "KC_3" , "KC_PMNS", - "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_NO" , "KC_TRNS", - - "KC_PAST" , "KC_4" , "KC_5" , "KC_6" , "KC_PEQL", - "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", - - "KC_TRNS" , "KC_TRNS", - "KC_TRNS" , "KC_TRNS" - ], - ["KC_TRNS" , "KC_ESC" , "KC_COLN" , "KC_TRNS" , "KC_TRNS", - "DF(2)" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_DEL", - - "KC_TRNS" , "KC_PERC" , "KC_SLSH" , "KC_ENT" , "KC_EXLM", - "DF(1)" , "KC_LGUI" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", - - "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", - "DF(0)" , "KC_TRNS" , "RALT_T(KC_COMM)", "RCTL_T(KC_DOT)" , "QK_BOOT", - - "KC_TRNS" , "KC_TAB", - "KC_NO" , "KC_TRNS" - ] - ], - "author": "@pierrec83" -} diff --git a/keyboards/ferris/keymaps/pierrec83/readme.md b/keyboards/ferris/keymaps/pierrec83/readme.md deleted file mode 100644 index d96a3bb811..0000000000 --- a/keyboards/ferris/keymaps/pierrec83/readme.md +++ /dev/null @@ -1,43 +0,0 @@ -@pierrec83's personal keymap for the Ferris keyboard -==================================================== - -This keymap shares many commonalities with the default keymap. -See its readme for a write-up on many of the decisions, including -how to generate the formatted json file with json2crab.py and the -general philosophy for each layer. - -Because this is my own keymap, I didn't refrain from using shortcuts -that make sense for me and may not make sense for most. - -Key differences from the default keymap include: - -Alpha layers: -------------- - -Because I only learned to touch type when I switched from qwerty to workman, -my base layer is workman and my layout doesn't contain a qwerty layer. - -My layer 1 hosts a variant of RSTHD that I am developing, inspired from workman's -focus on reducing side-index-motion. It should become my end game keymap eventually, -but I still haven't found the time to learn it to a working proficiency. - -Secondary thumbs: ------------------ - -Instead of a placeholder 0 and 1, the secondary thumbs on my keymap -perform the following actions: -* Navigate to previous and next workspace the base layer -* Navigate to previous and next tab on the mouse layer -* Volume control on layer -* Brightness control on layer - -Mouse layer: ------------- - -* Copy/Paste shortcuts on the left hand, on the upper row. - -Always available layer: ------------------------ - -* Esc and column are placed differently to allow easy vim navigation with the positions of w and q in the workman base layer -* Enable permanent switch to the RSTHD layer in addition to the mouse layer -- cgit v1.2.3