From f14629ed1cd7c7ec9089604d64f29a99981558e8 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Tue, 16 Jul 2019 16:04:02 +1000 Subject: Remove/migrate action_get_macro()s from default keymaps (#5625) * Remove/migrate action_get_macro()s from default keymaps * Leave these breaks alone --- keyboards/duck/jetfire/keymaps/default/keymap.c | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'keyboards/duck/jetfire') diff --git a/keyboards/duck/jetfire/keymaps/default/keymap.c b/keyboards/duck/jetfire/keymaps/default/keymap.c index da0081a75e..9377ef0028 100644 --- a/keyboards/duck/jetfire/keymaps/default/keymap.c +++ b/keyboards/duck/jetfire/keymaps/default/keymap.c @@ -26,22 +26,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_COMM), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - void matrix_init_user(void) { } -- cgit v1.2.3 From ba42a5ae68a59ad514027d819c6b58ee86944e75 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Tue, 16 Jul 2019 17:26:38 +1000 Subject: Remove commented out MCUs in rules.mk (#5884) --- keyboards/duck/jetfire/rules.mk | 1 - 1 file changed, 1 deletion(-) (limited to 'keyboards/duck/jetfire') diff --git a/keyboards/duck/jetfire/rules.mk b/keyboards/duck/jetfire/rules.mk index c708593293..dceddc7c7d 100644 --- a/keyboards/duck/jetfire/rules.mk +++ b/keyboards/duck/jetfire/rules.mk @@ -1,5 +1,4 @@ # MCU name -#MCU = at90usb1286 MCU = atmega32u4 # Processor frequency. -- cgit v1.2.3 From e8b65d01709c2ebdf50c0aa95963d200fa4fa4c6 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Sun, 6 Oct 2019 05:09:35 +1100 Subject: Cleanup rules.mk for 32U4 keyboards, A-F (#6804) * Cleanup rules.mk for 32U4 keyboards, A-F * Put back stuff in VIA keymaps --- keyboards/duck/jetfire/rules.mk | 54 +++++++---------------------------------- 1 file changed, 9 insertions(+), 45 deletions(-) (limited to 'keyboards/duck/jetfire') diff --git a/keyboards/duck/jetfire/rules.mk b/keyboards/duck/jetfire/rules.mk index dceddc7c7d..04d4f45695 100644 --- a/keyboards/duck/jetfire/rules.mk +++ b/keyboards/duck/jetfire/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable -- cgit v1.2.3