From a0a57dc6136a41d0149f2dea817b672e90f6d1da Mon Sep 17 00:00:00 2001 From: Blake Date: Wed, 7 Jul 2021 02:05:53 +0100 Subject: [Keyboard] Add new Elise, 65% Keyboard ANSI / ISO (#12782) Co-authored-by: Ryan Co-authored-by: Drashna Jaelre --- keyboards/draytronics/elise/readme.md | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 keyboards/draytronics/elise/readme.md (limited to 'keyboards/draytronics/elise/readme.md') diff --git a/keyboards/draytronics/elise/readme.md b/keyboards/draytronics/elise/readme.md new file mode 100644 index 0000000000..278bc10656 --- /dev/null +++ b/keyboards/draytronics/elise/readme.md @@ -0,0 +1,32 @@ +# ELISE + +![elise](https://www.draytronics.co.uk/wp-content/uploads/2021/04/repository-open-graph-template.png) + +A open source, low cost 65% keyboard PCB with USB-C, ESD protection, RGB underglow and XD68 case / plate compatability. Designed in the UK. +More info / sales / PCB designs available at [draytronics.co.uk/elise](https://draytronics.co.uk) + +* Keyboard Maintainer: [Blake Drayson](https://github.com/ghostseven) +* Hardware Supported: ELISE PCB / ATMega32U4 +* Hardware Availability: [draytronics.co.uk](https://draytronics.co.uk) + + +Entering DFU mode (to allow flashing): + + - Pressing the reset button on the back of the board when it is plugged in will enter DFU. + - Holding down the ESC key whilst plugging in the keyboard will enter DFU. + - If you have one of the provided keymaps flashed, then pressing FN-Tab will enter DFU. + +Make example for this keyboard (after setting up your build environment): + + make draytronics/elise:default + +Flashing example for this keyboard: + + make draytronics/elise:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + + +![elise-pcb-top](https://www.draytronics.co.uk/wp-content/uploads/2021/04/Draytronics-Elise-PCB-V1-top.png) + +![elise-pcb-bot](https://www.draytronics.co.uk/wp-content/uploads/2021/04/Draytronics-Elise-PCB-V1-bottom.png) -- cgit v1.2.3