From 5de86a05c31482b5c770888e33c98d933c42b34c Mon Sep 17 00:00:00 2001 From: Takuya Urakawa Date: Mon, 7 Mar 2022 12:27:41 +0900 Subject: [Keyboard] Add Lain keyboard (#16345) Co-authored-by: Joel Challis Co-authored-by: Ryan --- keyboards/dm9records/lain/readme.md | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 keyboards/dm9records/lain/readme.md (limited to 'keyboards/dm9records/lain/readme.md') diff --git a/keyboards/dm9records/lain/readme.md b/keyboards/dm9records/lain/readme.md new file mode 100644 index 0000000000..6eb216af61 --- /dev/null +++ b/keyboards/dm9records/lain/readme.md @@ -0,0 +1,32 @@ +# lain + +![lain](https://i.imgur.com/V0mR1Bgh.jpg) + +Ergonomic 40% keyboard. + +serial exprement lain themed. +licensed under #lainttl (https://www.nbcuni.co.jp/rondorobe/anime/lain/ttl/) + +* Keyboard Maintainer: [Takuya Urakawa @hsgw](https://github.com/hsgw), https://5z6p.com +* Hardware Supported: onboard MCU. +* Hardware Availability: Group buy. (https://5z6p.com/products/lain/) + +Make example for this keyboard (after setting up your build environment): + + make dm9records/lain:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Note +### PCB revision + +If your pcb is not Rev.1, you should use the firmware in below repository. +https://github.com/hsgw/qmk_firmware/tree/lain/keyboards/dm9records/lain + +### Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available -- cgit v1.2.3