From 5bff9d61818c5dd692c505896aee287168af80cc Mon Sep 17 00:00:00 2001 From: Balz Guenat Date: Wed, 16 Aug 2017 01:34:46 +0200 Subject: cleanup usb-usb converter code --- keyboards/converter/usb_usb/rules.mk | 120 +++++------------------------------ 1 file changed, 17 insertions(+), 103 deletions(-) (limited to 'keyboards/converter/usb_usb/rules.mk') diff --git a/keyboards/converter/usb_usb/rules.mk b/keyboards/converter/usb_usb/rules.mk index 298bc5c404..4ee6cdb1ce 100644 --- a/keyboards/converter/usb_usb/rules.mk +++ b/keyboards/converter/usb_usb/rules.mk @@ -1,51 +1,3 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Target file name (without extension). -# TARGET ?= usb_usb - -# TMK_DIR ?= ../../tmk_core - -# Directory keyboard dependent files exist -# TARGET_DIR ?= . - # MCU name MCU ?= atmega32u4 @@ -64,12 +16,12 @@ MCU ?= atmega32u4 F_CPU ?= 8000000 - # # LUFA specific # # Target architecture (see library "Board Types" documentation). ARCH ?= AVR8 + # Input clock frequency. # This will define a symbol, F_USB, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may @@ -82,71 +34,33 @@ ARCH ?= AVR8 # If no clock division is performed on the input clock inside the AVR (via the # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB ?= $(F_CPU) + # Interrupt driven control endpoint task OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Build Options -# comment out to disable the options. -# -#MOUSEKEY_ENABLE ?= yes # Mouse keys -EXTRAKEY_ENABLE ?= yes # Media control and System control -# CONSOLE_ENABLE ?= yes # Console for debug -CONSOLE_ENABLE ?= no # Console for debug -#COMMAND_ENABLE ?= yes # Commands for debug and configuration -#NKRO_ENABLE ?= yes # USB Nkey Rollover - -# Boot Section Size in bytes +# Boot Section Size in *bytes* # Teensy halfKay 512 +# Teensy++ halfKay 1024 # Atmel DFU loader 4096 # LUFA bootloader 4096 +# USBaspLoader 2048 OPT_DEFS += -DBOOTLOADER_SIZE=4096 -#LDFLAGS += -Wl,--relax - -#OPT_DEFS += -DNO_ACTION_TAPPING -#OPT_DEFS += -DNO_ACTION_LAYER -#OPT_DEFS += -DNO_ACTION_MACRO -CUSTOM_MATRIX = yes - -SRC = custom_matrix.cpp - -# -# Keymap file +# Build Options +# comment out to disable the options. # -# ifeq (yes,$(strip $(UNIMAP_ENABLE))) -# KEYMAP_FILE = unimap -# else -# ifeq (yes,$(strip $(ACTIONMAP_ENABLE))) -# KEYMAP_FILE = actionmap -# else -# KEYMAP_FILE = keymap -# endif -# endif -# ifdef KEYMAP -# SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC) -# else -# SRC := $(KEYMAP_FILE).c $(SRC) -# endif - -# CONFIG_H ?= config.h - - - -# Search Path -# VPATH += $(TARGET_DIR) -# VPATH += $(TMK_DIR) - - - -# program Leonardo -# PROGRAM_CMD = avrdude -p$(MCU) -cavr109 -b57600 -Uflash:w:$(TARGET).hex -P$(DEV) - +# BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +# MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA +# BACKLIGHT_ENABLE ?= yes +CUSTOM_MATRIX = yes +SRC = custom_matrix.cpp include $(TMK_DIR)/protocol/usb_hid.mk -# include $(TMK_DIR)/protocol/lufa.mk -# include $(TMK_DIR)/common.mk -# include $(TMK_DIR)/rules.mk -- cgit v1.2.3