From 52ecc76e28bbcde9e35d35eb48a4d5b78aa204e2 Mon Sep 17 00:00:00 2001
From: Yann Hodique <yhodique@google.com>
Date: Thu, 11 Oct 2018 15:26:56 -0700
Subject: port sun_usb converter from tmk

initial import
---
 keyboards/converter/sun_usb/config.h | 88 ++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 keyboards/converter/sun_usb/config.h

(limited to 'keyboards/converter/sun_usb/config.h')

diff --git a/keyboards/converter/sun_usb/config.h b/keyboards/converter/sun_usb/config.h
new file mode 100644
index 0000000000..f7ad416393
--- /dev/null
+++ b/keyboards/converter/sun_usb/config.h
@@ -0,0 +1,88 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define CUSTOM_MATRIX 2
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3333
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    QMK
+#define PRODUCT         Sun keyboard converter
+#define DESCRIPTION     USB converter for Sun type 5 keyboard
+
+/* matrix size */
+#define MATRIX_ROWS 16
+#define MATRIX_COLS 8
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
+    keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+/* Serial(USART) configuration
+ *     asynchronous, negative logic, 1200baud, no flow control
+ *     1-start bit, 8-data bit, non parity, 1-stop bit
+ */
+#define SERIAL_SOFT_BAUD            1200
+#define SERIAL_SOFT_PARITY_NONE
+#define SERIAL_SOFT_BIT_ORDER_LSB
+#define SERIAL_SOFT_LOGIC_NEGATIVE
+/* RXD Port */
+#define SERIAL_SOFT_RXD_ENABLE
+#define SERIAL_SOFT_RXD_DDR         DDRD
+#define SERIAL_SOFT_RXD_PORT        PORTD
+#define SERIAL_SOFT_RXD_PIN         PIND
+#define SERIAL_SOFT_RXD_BIT         2
+#define SERIAL_SOFT_RXD_VECT        INT2_vect
+/* RXD Interupt */
+#define SERIAL_SOFT_RXD_INIT()      do { \
+    /* pin configuration: input with pull-up */ \
+    SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
+    SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
+    /* enable interrupt: INT2(rising edge) */ \
+    EICRA |= ((1<<ISC21)|(1<<ISC20)); \
+    EIMSK |= (1<<INT2); \
+    sei(); \
+} while (0)
+#define SERIAL_SOFT_RXD_INT_ENTER()
+#define SERIAL_SOFT_RXD_INT_EXIT()  do { \
+    /* clear interrupt  flag */ \
+    EIFR = (1<<INTF2); \
+} while (0)
+#define SERIAL_SOFT_RXD_READ()      (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
+/* TXD Port */
+#define SERIAL_SOFT_TXD_ENABLE
+#define SERIAL_SOFT_TXD_DDR         DDRD
+#define SERIAL_SOFT_TXD_PORT        PORTD
+#define SERIAL_SOFT_TXD_PIN         PIND
+#define SERIAL_SOFT_TXD_BIT         3
+#define SERIAL_SOFT_TXD_HI()        do { SERIAL_SOFT_TXD_PORT |=  (1<<SERIAL_SOFT_TXD_BIT); } while (0)
+#define SERIAL_SOFT_TXD_LO()        do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0)
+#define SERIAL_SOFT_TXD_INIT()      do { \
+    /* pin configuration: output */ \
+    SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \
+    /* idle */ \
+    SERIAL_SOFT_TXD_ON(); \
+} while (0)
+
+#endif
-- 
cgit v1.2.3