From 5fd68266f5d90b2c7045f44f678d71b782907752 Mon Sep 17 00:00:00 2001 From: skullydazed Date: Fri, 29 Sep 2017 16:17:30 -0700 Subject: Clueboard 60% support (#1746) * initial clueboard_60 support * LED lighting support * fix the clueboard->clueboard_66 rename * Add layout support to clueboard_60 * Fix the 60_iso layout so it's actually iso * add a default keymap for AEK layout * fix clueboard_17 * Fixup the ISO layouts * Fix the `wait_ms()/wait_us()` definitions for chibios * Fix up the wait_ms/wait_us hack. Reduce stack size. * Add a missing #include "wait.h" * commit files that should have already been comitted --- keyboards/cluepad/cluepad.c | 60 ----------------- keyboards/cluepad/cluepad.h | 36 ----------- keyboards/cluepad/config.h | 100 ----------------------------- keyboards/cluepad/keymaps/default/keymap.c | 65 ------------------- keyboards/cluepad/readme.md | 15 ----- keyboards/cluepad/rules.mk | 65 ------------------- 6 files changed, 341 deletions(-) delete mode 100644 keyboards/cluepad/cluepad.c delete mode 100644 keyboards/cluepad/cluepad.h delete mode 100644 keyboards/cluepad/config.h delete mode 100644 keyboards/cluepad/keymaps/default/keymap.c delete mode 100644 keyboards/cluepad/readme.md delete mode 100644 keyboards/cluepad/rules.mk (limited to 'keyboards/cluepad') diff --git a/keyboards/cluepad/cluepad.c b/keyboards/cluepad/cluepad.c deleted file mode 100644 index 1867b617fd..0000000000 --- a/keyboards/cluepad/cluepad.c +++ /dev/null @@ -1,60 +0,0 @@ -#include "cluepad.h" - -int pwm_level; - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - - // JTAG disable for PORT F. write JTD bit twice within four cycles. - MCUCR |= (1<> 8; - OCR4A = 0xFF & pwm_level; -} diff --git a/keyboards/cluepad/cluepad.h b/keyboards/cluepad/cluepad.h deleted file mode 100644 index 5e4a5999e2..0000000000 --- a/keyboards/cluepad/cluepad.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef CLUEPAD_H -#define CLUEPAD_H - -#include "quantum.h" - - -/* Cluepad matrix layout - * .-------------------. - * |NLCK| /| *| -| - * |-------------------| - * | 7| 8| 9| | - * |--------------| | - * | 4| 5| 6| +| - * |-------------------| - * | 1| 2| 3| | - * |--------------| | - * | 0| .| Ent| - * '-------------------' - */ -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define KEYMAP( \ - k00, k01, k02, k03, \ - k10, k11, k12, k13, \ - k20, k21, k22, \ - k30, k31, k32, k33, \ - k40, k42 \ -) { \ - { k00, k01, k02, k03, }, \ - { k10, k11, k12, k13, }, \ - { k20, k21, k22, KC_NO, }, \ - { k30, k31, k32, k33, }, \ - { k40, KC_NO, k42, KC_NO } \ -} - -#endif diff --git a/keyboards/cluepad/config.h b/keyboards/cluepad/config.h deleted file mode 100644 index bd64dfd27d..0000000000 --- a/keyboards/cluepad/config.h +++ /dev/null @@ -1,100 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2312 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard -#define PRODUCT Cluepad with RGB Underlighting -#define DESCRIPTION QMK keyboard firmware for Cluepad - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 4 - -// ROWS: Top to bottom, COLS: Left to right -/* Row pin configuration -* row: 0 1 2 3 4 -* pin: -*/ -#define MATRIX_ROW_PINS { B0, D3, D5, D4, D6 } -/* Column pin configuration - * col: 0 1 2 3 - * pin: F4 E6 B1 D2 - */ -#define MATRIX_COL_PINS { F4, E6, B1, D2 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Number of backlighting levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* Underlight configuration - */ -#define RGB_DI_PIN F6 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 4 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* Debug forcibly enabled */ -#define ALWAYS_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/cluepad/keymaps/default/keymap.c b/keyboards/cluepad/keymaps/default/keymap.c deleted file mode 100644 index 66827fe48b..0000000000 --- a/keyboards/cluepad/keymaps/default/keymap.c +++ /dev/null @@ -1,65 +0,0 @@ -#include "cluepad.h" - -#include "backlight.h" - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _RS 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: (Base Layer) Default Layer - * .-------------------. - * |NL F| /| *| -| - * |-------------------| - * | 7| 8| 9| | - * |--------------| | - * | 4| 5| 6| +| - * |-------------------| - * | 1| 2| 3| | - * |--------------| | - * | 0| .| Ent| - * '-------------------' - */ -[_BL] = KEYMAP( - LT(_FL, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, KC_PPLS, \ - KC_P4, KC_P5, KC_P6, \ - KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_P0, KC_PDOT), - - /* Keymap _FL: Function Layer - * .-------------------. - * |NL F| | | Fn0| - * |-------------------| - * | | Fn4| | | - * |--------------| | - * | Fn3|BL_S| Fn2| Fn6| - * |-------------------| - * | | Fn5| | | - * |--------------| | - * | Fn1| | Fn7| - * '-------------------' - */ -[_FL] = KEYMAP( - LT(_FL, KC_NLCK), KC_TRNS, KC_TRNS, RGB_TOG, \ - KC_TRNS, RGB_SAI, KC_TRNS, RGB_VAI, \ - RGB_HUD, BL_STEP, RGB_HUI, \ - KC_TRNS, RGB_SAD, KC_TRNS, RGB_VAD, \ - RGB_MOD, KC_TRNS) -}; - -/*enum function_id { -};*/ - -const uint16_t PROGMEM fn_actions[] = { -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch (id) { - } -} - diff --git a/keyboards/cluepad/readme.md b/keyboards/cluepad/readme.md deleted file mode 100644 index f79d6b5594..0000000000 --- a/keyboards/cluepad/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# Cluepad - -![Cluepad](https://static1.squarespace.com/static/55c13bdee4b099be5dcb82eb/5842fbdce3df28eae5ec557e/5844fb2cb8a79bbdfd63bad1/1498501250178/IMGP3931.jpg?format=750w) - -A basic 17 key numpad PCB. - -* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) -* Hardware Supported: Cluepad PCB 1.0 -* Hardware Availability: [clueboard.co](https://clueboard.co/) - -Make example for this keyboard (after setting up your build environment): - - make cluepad-default - -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/cluepad/rules.mk b/keyboards/cluepad/rules.mk deleted file mode 100644 index 264aba044d..0000000000 --- a/keyboards/cluepad/rules.mk +++ /dev/null @@ -1,65 +0,0 @@ - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -# MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -# EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -# CONSOLE_ENABLE = yes # Console for debug(+400) -# COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable numpad's backlight functionality -RGBLIGHT_ENABLE = yes -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID \ No newline at end of file -- cgit v1.2.3