From 38de991fda2bdb813b2acd067762a22c59607207 Mon Sep 17 00:00:00 2001 From: Simon Hengel Date: Mon, 29 Aug 2022 11:39:45 +0700 Subject: [Keyboard] Add chord/zero (#18190) --- keyboards/chord/zero/readme.md | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 keyboards/chord/zero/readme.md (limited to 'keyboards/chord/zero/readme.md') diff --git a/keyboards/chord/zero/readme.md b/keyboards/chord/zero/readme.md new file mode 100644 index 0000000000..51e3f2ce10 --- /dev/null +++ b/keyboards/chord/zero/readme.md @@ -0,0 +1,37 @@ +# CHORD ZERO Stenographic Keyboard + +![CHORD ZERO](https://i.imgur.com/aS2MPQ2h.jpg) + +CHORD ZERO is a stenographic keyboard that can be used with +[Plover](https://www.openstenoproject.org/plover/) or any other application +that supports the [TX +Bolt](https://docs.qmk.fm/#/feature_stenography?id=tx-bolt) or +[GeminiPR](https://docs.qmk.fm/#/feature_stenography?id=geminipr) protocol. + +* Keyboard Maintainer: [Simon Hengel](https://github.com/sol) +* Hardware Supported: REV 0, REV 1 +* Hardware Availability: https://github.com/sol/chord-zero#readme + +Make example for this keyboard (after setting up your build environment): + + make chord/zero:default + +or + + qmk compile -kb chord/zero -km default + +This will generate `chord_zero_default.uf2`. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Reset key combo**: Press the six keys at the outer columns on each side of the keyboard simultaneously while it is plugged in +* **Bootmagic reset**: Hold down the top left key and plug in the keyboard +* **Physical reset button**: Press the button on the back of the PCB and plug in the keyboard + +Once the keyboard is in bootloader mode you can mount it as a USB mass storage +device and copy the firmware (the file `chord_zero_default.uf2`) onto it. Once +copying is completed the keyboard will reboot automatically. -- cgit v1.2.3