From ff6c70415c536e6435023627197550889ffa1501 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sun, 6 Mar 2022 22:12:17 -0800 Subject: [Keymap] Drashna Mouse keys and oled updates (#16556) --- .../charybdis/4x6/keymaps/drashna/config.h | 91 ++++++++++++++++++++++ 1 file changed, 91 insertions(+) create mode 100644 keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h (limited to 'keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h') diff --git a/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h new file mode 100644 index 0000000000..f384318dc4 --- /dev/null +++ b/keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h @@ -0,0 +1,91 @@ +/** + * Copyright 2021 Charly Delay (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#undef MATRIX_COL_PINS +#define MATRIX_COL_PINS \ + { B0, B1, B10, B3, B4, B5 } +#undef MATRIX_COL_PINS_RIGHT +#define MATRIX_COL_PINS_RIGHT \ + { B0, B1, B10, B3, B4, B5 } + +#undef MATRIX_ROW_PINS +#define MATRIX_ROW_PINS \ + { B15, A2, B8, A8, B9 } +#undef MATRIX_ROW_PINS_RIGHT +#define MATRIX_ROW_PINS_RIGHT \ + { B15, A2, B8, A8, B9 } + +#define DIODE_DIRECTION ROW2COL +#define SPLIT_HAND_PIN A3 + +#undef RGB_DI_PIN +#define RGB_DI_PIN A1 +#define WS2812_EXTERNAL_PULLUP +#define WS2812_PWM_DRIVER PWMD2 +#define WS2812_PWM_CHANNEL 2 +#define WS2812_PWM_PAL_MODE 1 +#define WS2812_EXTERNAL_PULLUP +#define WS2812_DMA_STREAM STM32_DMA1_STREAM1 +#define WS2812_DMA_CHANNEL 3 +#define WS2812_PWM_TARGET_PERIOD 800000 + +#define DEBUG_LED_PIN C13 + +#undef SOFT_SERIAL_PIN +// #define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. +#define SERIAL_USART_TX_PIN A9 +// #define SERIAL_USART_RX_PIN A3 +// #define SERIAL_USART_DRIVER SD2 +// #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +// #define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +// #define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 +// // #define SERIAL_USART_PIN_SWAP // swap RX and TX pins on master +// // To use the highest possible baudrate (3.75Mbit/s) uncomment the following +// // line, this can result in dropped communications so lower the speed if there +// // are many timeouts. +// // #define SERIAL_USART_SPEED (STM32_PCLK2 >> 4) + +#define CRC8_USE_TABLE +#define CRC8_OPTIMIZE_SPEED + +/* spi config for eeprom and pmw3360 sensor */ +#define SPI_DRIVER SPID1 +#define SPI_SCK_PIN A5 +#define SPI_SCK_PAL_MODE 5 +#define SPI_MOSI_PIN A7 +#define SPI_MOSI_PAL_MODE 5 +#define SPI_MISO_PIN A6 +#define SPI_MISO_PAL_MODE 5 + +#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 +#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64 + +#undef PMW3360_CS_PIN +#define PMW3360_CS_PIN B14 +#define PMW3360_CS_MODE 3 +#define PMW3360_CS_DIVISOR 64 + +#define CHARYBDIS_MINIMUM_DEFAULT_DPI 1200 +#define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 400 +#define CHARYBDIS_MINIMUM_SNIPING_DPI 200 +#define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 100 + +/* RGB Matrix. */ + +#undef RGB_MATRIX_MAXIMUM_BRIGHTNESS +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 -- cgit v1.2.3