From 99c6829bf06b1cd43365e6c7ef2f136062b8ad06 Mon Sep 17 00:00:00 2001 From: ryjelsum <79069893+ryjelsum@users.noreply.github.com> Date: Sat, 27 Nov 2021 21:52:53 -0800 Subject: [Keyboard] Add 40percent.club's 'polypad' PCB (#15158) Co-authored-by: Joel Challis Co-authored-by: Sergey Vlasov Co-authored-by: Drashna Jaelre --- keyboards/40percentclub/polyandry/readme.md | 53 +++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 keyboards/40percentclub/polyandry/readme.md (limited to 'keyboards/40percentclub/polyandry/readme.md') diff --git a/keyboards/40percentclub/polyandry/readme.md b/keyboards/40percentclub/polyandry/readme.md new file mode 100644 index 0000000000..b6acf3cd7f --- /dev/null +++ b/keyboards/40percentclub/polyandry/readme.md @@ -0,0 +1,53 @@ +# Polyandry/polypad + +![Polyandry](https://1.bp.blogspot.com/-97uoICZvZec/XSdpvCVFFlI/AAAAAAACVZY/BlCRjxjDqDAxOZa6C5ddQr0OsFQ9VZv5wCLcBGAs/s1600/d1.jpg) +=== + +3x4/4x3 grid layout, multiple controllers supported +- Pro Micro +- PJRC Teensy 2.0 + +(**The below are not currently ported:**) + +- PJRC Teensy LC/3.2 +- PJRC Teensy 3.5/3.6 +- Adafruit ItsyBitsy ATMega32u4 +- Adafruit ItsyBitsy M0 +- Adafruit ItsyBitsy M4 + +The matrix is electrically 1x12 with no diodes, with a thirteenth pin used for the column rather than a ground in order to be compatible with all the listed microcontrollers.. + +The default keymap is a testing keymap that is intended to make sure all of the keys on the matrix are working and properly assigned. + +[The original (minimal arduino sketch) firmware, with support for some unsupported controllers](https://git.40percent.club/di0ib/Misc/src/branch/master/polyandry) + +Keyboard Maintainer: QMK Community +Hardware Supported: Polyandry PCB +Hardware Availability: [Polyandry gerbers are on 40percent.club](https://www.40percent.club/2019/07/polyandry.html) + +Make example for this keyboard (after setting up your build environment): + + make 40percentclub/polyandry:default + or + qmk compile -kb 40percentclub/polyandry -km default + +Default firmware is for an Arduino Pro Micro knockoff. + +If you would like to specify a controller: + + make 40percentclub/polyandry/promicro:default + or + qmk compile -kb 40percentclub/polyandry/promicro -km default + make 40percentclub/polyandry/teensy2:default + or + qmk compile -kb 40percentclub/polyandry/teensy2 -km default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the top left key of the keyboard (top right or bottom left in horizontal configuration) +* **Physical reset**: Briefly press the button on the bottom of the microcontroller or, if not present short the pin marked RST to a GND. +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3