From ed8d9a099d90d0a367d3887a26a1efa9129bc345 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sun, 14 Dec 2014 10:30:27 -0500 Subject: added planck folder --- keyboard/planck/Makefile | 135 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 135 insertions(+) create mode 100644 keyboard/planck/Makefile (limited to 'keyboard/planck/Makefile') diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile new file mode 100644 index 0000000000..2ec324bd95 --- /dev/null +++ b/keyboard/planck/Makefile @@ -0,0 +1,135 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = gh60_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_jack.c $(SRC) +endif + +CONFIG_H = config.h + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA + + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk -- cgit v1.2.3 From d6f2f878f90ce033a2495aa9ad82cfa1578429b9 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Mon, 5 Jan 2015 16:32:15 -0500 Subject: dotcom --- keyboard/planck/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboard/planck/Makefile') diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile index 2ec324bd95..12431cdbed 100644 --- a/keyboard/planck/Makefile +++ b/keyboard/planck/Makefile @@ -55,7 +55,7 @@ SRC = keymap_common.c \ ifdef KEYMAP SRC := keymap_$(KEYMAP).c $(SRC) else - SRC := keymap_jack.c $(SRC) + SRC := keymap_dotcom.c $(SRC) endif CONFIG_H = config.h -- cgit v1.2.3 From 42fe42274fe0ff2f10698100f28ab686822652ff Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Mon, 12 Jan 2015 12:37:16 -0500 Subject: names --- keyboard/planck/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboard/planck/Makefile') diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile index 12431cdbed..0d84d8b472 100644 --- a/keyboard/planck/Makefile +++ b/keyboard/planck/Makefile @@ -39,7 +39,7 @@ #---------------------------------------------------------------------------- # Target file name (without extension). -TARGET = gh60_lufa +TARGET = planck_lufa # Directory common source filess exist TOP_DIR = ../.. -- cgit v1.2.3 From 2e0d872ab7ba8446cb7a9536acafd59d1db57f14 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Tue, 13 Jan 2015 18:05:37 -0500 Subject: sean --- keyboard/planck/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboard/planck/Makefile') diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile index 0d84d8b472..22101096e9 100644 --- a/keyboard/planck/Makefile +++ b/keyboard/planck/Makefile @@ -55,7 +55,7 @@ SRC = keymap_common.c \ ifdef KEYMAP SRC := keymap_$(KEYMAP).c $(SRC) else - SRC := keymap_dotcom.c $(SRC) + SRC := keymap_sean.c $(SRC) endif CONFIG_H = config.h -- cgit v1.2.3 From a4d091eb525d574ab24a545ecb22dfdb0b26fc1e Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 19 Feb 2015 19:35:57 -0500 Subject: joe --- keyboard/planck/Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'keyboard/planck/Makefile') diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile index 22101096e9..3bc12da023 100644 --- a/keyboard/planck/Makefile +++ b/keyboard/planck/Makefile @@ -55,12 +55,11 @@ SRC = keymap_common.c \ ifdef KEYMAP SRC := keymap_$(KEYMAP).c $(SRC) else - SRC := keymap_sean.c $(SRC) + SRC := keymap_joe.c $(SRC) endif CONFIG_H = config.h - # MCU name #MCU = at90usb1287 MCU = atmega32u4 -- cgit v1.2.3 From ea6de22aeed15eb5009698979065b0b504ac26cc Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 26 Feb 2015 16:35:54 -0500 Subject: brett --- keyboard/planck/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboard/planck/Makefile') diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile index 3bc12da023..c456cb51b3 100644 --- a/keyboard/planck/Makefile +++ b/keyboard/planck/Makefile @@ -55,7 +55,7 @@ SRC = keymap_common.c \ ifdef KEYMAP SRC := keymap_$(KEYMAP).c $(SRC) else - SRC := keymap_joe.c $(SRC) + SRC := keymap_jack.c $(SRC) endif CONFIG_H = config.h -- cgit v1.2.3 From 15b9bce6bab13d85529fe9aaa91b3df9cd773e13 Mon Sep 17 00:00:00 2001 From: Wilba6582 Date: Tue, 17 Mar 2015 00:43:37 +1100 Subject: Initial commit for Planck PCB Rev 1. - Backlight on PB7 controlled by Timer1 Fast PWM (no interrupts). - Backlight commands connected temporarily to top left keys. - Backlight init called from matrix.c, since there's no generic keyboard_init() override function. --- keyboard/planck/Makefile | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'keyboard/planck/Makefile') diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile index c456cb51b3..001f17f316 100644 --- a/keyboard/planck/Makefile +++ b/keyboard/planck/Makefile @@ -50,7 +50,8 @@ TARGET_DIR = . # project specific files SRC = keymap_common.c \ matrix.c \ - led.c + led.c \ + backlight.c ifdef KEYMAP SRC := keymap_$(KEYMAP).c $(SRC) @@ -118,9 +119,10 @@ MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA - +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality # Optimize size but this may cause error "relocation truncated to fit" #EXTRALDFLAGS = -Wl,--relax -- cgit v1.2.3