From 208f6d7f9146782d4c437aedf75a0a7043db7765 Mon Sep 17 00:00:00 2001
From: tmk <nobody@nowhere>
Date: Thu, 1 Nov 2012 14:24:21 +0900
Subject: Improve documentation

---
 keyboard/hhkb/README.md | 135 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 135 insertions(+)
 create mode 100644 keyboard/hhkb/README.md

(limited to 'keyboard/hhkb/README.md')

diff --git a/keyboard/hhkb/README.md b/keyboard/hhkb/README.md
new file mode 100644
index 0000000000..cd3a43eb7f
--- /dev/null
+++ b/keyboard/hhkb/README.md
@@ -0,0 +1,135 @@
+Alternative Controller for HHKB Pro
+===================================
+I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and
+firmware source code is not open, of course. This means customizing this keyboard needs to replace original 
+controller with programmable one. For this purpose I used PJRC [Teensy++][Teensy] as alternative controller.
+
+[HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/
+[Teensy]: http://www.pjrc.com/teensy/
+
+
+My keyboard firmware source tree is here: http://github.com/tmk/tmk_keyboard
+See directory keyboard/hhkb to build firmware for HHKB.
+
+
+##Features
+* Customizable keymap
+* More keymap layers(more Fn keys)
+* Mouse keys
+* USB NKRO
+
+###Pros
+* Without PCB trace cutting, case mod or any destructives
+* Can keep original controller intact
+* Can change all HHKB behaviour as you like
+
+###Cons
+* Void your warranty
+* Lose USB hub function in case of Pro2
+
+##DISCLAIMER
+I'm not a professional of electronics or MCU programming. This may damage your HHKB.
+And my English writing is poor, I'm not sure I can convey my notions accurately.
+
+
+
+
+
+
+##Build Firmware
+You can choose some combination of MCU and USB protocol stack.
+
+### Teensy++(AVR USB family) with [LUFA]
+0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail.
+
+1. Edit **keymap.c** to use your favoirte keymap.
+
+2. Edit **Makefile** if you want to use other `MCU` than Teensy++ 2.0.
+
+3. Build firmware binary file:
+    `$ make -f Makefile.lufa`
+
+4. Program MCU with PJRC [Teensy Loader] tool. If you install command line version of the loader just run:
+    `$  make -f Makefile.lufa teensy`
+
+[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
+[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
+
+
+###AVR Mega with [V-USB]
+Follow below if you want to use AVR with V-USB as .
+
+0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail.
+
+1. Edit **keymap.c** to use your favoirte keymap.
+
+2. Edit **usbconfig.h** to configure V-USB options. 
+
+3. Edit **Makefile.vusb** to define `MCU` and `F_CPU`.
+
+4. Build firmware binary file:
+    `$ make -f Makefile.vusb`
+
+5. Program MCU with AVR programmer like AVRISPmkII. If you already have [USBaspLoader] on MCU just run:
+    `$  make -f Makefile.vusb program`
+
+[V-USB]: http://www.obdev.at/products/vusb/index.html
+[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html
+
+
+###How to Customize Keymap
+Later...
+See **keymap.c**.
+
+
+##Hardware
+
+###Teensy++ installation
+Angled USB mini B adapter is used to install Teensy++ laterally.
+![doc/HHKB_img/teensy_install.jpg]
+
+Bread baord wires are used to connect Teensy++.
+![doc/HHKB_img/teensy_wiring.jpg]
+![doc/HHKB_img/connector_contact.jpg]
+
+
+###PJRC Teensy++ 2.0 connection
+                            +---------------+
+                            |   Teensy++    |
+                            |               |
+                            |               |        HHKB
+                            |               |        ~~~~
+                            |          PB0-2|------->ROW(6-8)
+                            |          PB3-5|------->COL(9-11)
+                            |            PB6|------->ENABLE(12)
+                            |            PE6|<-------KEY(4)
+                            |            PE7|------->PREV(5)
+                            |               |
+                            |               |
+                            |               |
+                            +---------------+
+
+
+###V-USB circuit
+                    +---+   +---------------+
+    USB            GND  |   |   ATmega168   |
+    ~~~                 C3  |               |
+    5V <-------+--------+---|Vcc,AVCC       |        HHKB
+               R1           |               |        ~~~~
+    D- <----+--+-----R2-----|INT1      PB2-4|------->ROW(6-8)
+    D+ <----|---+----R3-----|INT0      PC0-2|------->COL(9-11)
+            Z1  Z2          |            PC3|------->ENABLE(12)
+    GND<----+---+-----------|GND         PB0|<-------KEY(4)
+                            |            PB1|------->PREV(5)
+                            |               |
+                GND+-C2--+--|XTAL1       RXD|------->Debug Console
+                         X1 |            TXD|<-------Debug Console
+                GND+-C3--+--|XTAL2       RST|---SW--+GND
+                            +---------------+
+    R1:     1.5K Ohm
+    R2,R3:  68 Ohm
+    Z1,Z2:  Zener 3.6V
+    C1,C2:  22pF
+    C3:     0.1uF
+    X1:     Crystal 20MHz(16MHz/12MHz)
+    SW:     Push Switch(Optional for bootloader)
-- 
cgit v1.2.3