From 10a6b2c7d8bc9c5d2657acdeefa1102be5035280 Mon Sep 17 00:00:00 2001 From: Jun Wako Date: Sun, 11 Jan 2015 01:54:17 +0900 Subject: hhkb: Add Makefile.jp for HHKB JP --- keyboard/hhkb/README.md | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'keyboard/hhkb/README.md') diff --git a/keyboard/hhkb/README.md b/keyboard/hhkb/README.md index d4a2cd0223..f9fd165076 100644 --- a/keyboard/hhkb/README.md +++ b/keyboard/hhkb/README.md @@ -43,12 +43,15 @@ See [doc/HHKB.txt](doc/HHKB.txt) and files under [doc/](doc/) for internal of HH See [this document](../../doc/build.md) first. ### Configuration -Set `MCU`, `BOOTLOADER_SIZE` and other build options in `Makefile` and `config.h`. If your target is **HHKB JP** you need to set `HHKB_JP` build option in `Makefile`. +If your target is **HHKB JP** you need to set `HHKB_JP` build option in `Makefile` or use `Makefile.jp` instead of `Makefile`. + +If you use other than **TMK Alt Controller Board** set proper `MCU`, `BOOTLOADER_SIZE` and other build options in `Makefile` and `config.h`. At least PJRC Teensy requires changing `BOOTLOADER_SIZE` to 512. ### Build Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. Just `make` with `KEYMAP` option like: $ make KEYMAP=[hasu|hhkb|spacefn|] + $ make -f Makefile.jp KEYMAP=[jp|] # for HHKB JP ### Program @@ -57,10 +60,12 @@ First, push reset button on board to start bootloader. This command programs the controller with [dfu-programmer] if the tool is installed and configured properly. $ make dfu + $ make -f Makefile.jp dfu # for HHKB JP Or you can also use [FLIP] command to program. Also the tool should be installed and configured properly. FLIP GUI application is also available. $ make flip + $ make -f Makefile.jp flip # for HHKB JP Use [Teensy Loader] if your controller is Teensy/Teensy++. -- cgit v1.2.3