From 358bc8eac8e74eb79cd876bc41f3992da2bfcaf3 Mon Sep 17 00:00:00 2001
From: Ryan <fauxpark@gmail.com>
Date: Mon, 4 Dec 2023 17:52:40 +1100
Subject: LED drivers: refactor page selection (#22518)

---
 drivers/led/issi/is31fl3737-simple.c | 33 +++++++++++++--------------------
 1 file changed, 13 insertions(+), 20 deletions(-)

(limited to 'drivers/led/issi/is31fl3737-simple.c')

diff --git a/drivers/led/issi/is31fl3737-simple.c b/drivers/led/issi/is31fl3737-simple.c
index 7f641f4ca5..930a6c9a90 100644
--- a/drivers/led/issi/is31fl3737-simple.c
+++ b/drivers/led/issi/is31fl3737-simple.c
@@ -53,7 +53,7 @@
 uint8_t g_twi_transfer_buffer[20];
 
 // These buffers match the IS31FL3737 PWM registers.
-// The control buffers match the PG0 LED On/Off registers.
+// The control buffers match the page 0 LED On/Off registers.
 // Storing them like this is optimal for I2C transfers to the registers.
 // We could optimize this and take out the unused registers from these
 // buffers and the transfers in is31fl3737_write_pwm_buffer() but it's
@@ -78,8 +78,13 @@ void is31fl3737_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
 #endif
 }
 
+void is31fl3737_select_page(uint8_t addr, uint8_t page) {
+    is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
+    is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, page);
+}
+
 void is31fl3737_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
-    // assumes PG1 is already selected
+    // assumes page 1 is already selected
 
     // transmit PWM registers in 12 transfers of 16 bytes
     // g_twi_transfer_buffer[] is 20 bytes
@@ -138,32 +143,23 @@ void is31fl3737_init(uint8_t addr) {
     // Set up the mode and other settings, clear the PWM registers,
     // then disable software shutdown.
 
-    // Unlock the command register.
-    is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
+    is31fl3737_select_page(addr, IS31FL3737_COMMAND_LED_CONTROL);
 
-    // Select PG0
-    is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_LED_CONTROL);
     // Turn off all LEDs.
     for (int i = 0; i < IS31FL3737_LED_CONTROL_REGISTER_COUNT; i++) {
         is31fl3737_write_register(addr, i, 0x00);
     }
 
-    // Unlock the command register.
-    is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
+    is31fl3737_select_page(addr, IS31FL3737_COMMAND_PWM);
 
-    // Select PG1
-    is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_PWM);
     // Set PWM on all LEDs to 0
     // No need to setup Breath registers to PWM as that is the default.
     for (int i = 0; i < IS31FL3737_PWM_REGISTER_COUNT; i++) {
         is31fl3737_write_register(addr, i, 0x00);
     }
 
-    // Unlock the command register.
-    is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
+    is31fl3737_select_page(addr, IS31FL3737_COMMAND_FUNCTION);
 
-    // Select PG3
-    is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_FUNCTION);
     // Set de-ghost pull-up resistors (SWx)
     is31fl3737_write_register(addr, IS31FL3737_FUNCTION_REG_SW_PULLUP, IS31FL3737_SW_PULLUP);
     // Set de-ghost pull-down resistors (CSx)
@@ -214,9 +210,7 @@ void is31fl3737_set_led_control_register(uint8_t index, bool value) {
 
 void is31fl3737_update_pwm_buffers(uint8_t addr, uint8_t index) {
     if (g_pwm_buffer_update_required[index]) {
-        // Firstly we need to unlock the command register and select PG1
-        is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
-        is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_PWM);
+        is31fl3737_select_page(addr, IS31FL3737_COMMAND_PWM);
 
         is31fl3737_write_pwm_buffer(addr, g_pwm_buffer[index]);
         g_pwm_buffer_update_required[index] = false;
@@ -225,9 +219,8 @@ void is31fl3737_update_pwm_buffers(uint8_t addr, uint8_t index) {
 
 void is31fl3737_update_led_control_registers(uint8_t addr, uint8_t index) {
     if (g_led_control_registers_update_required[index]) {
-        // Firstly we need to unlock the command register and select PG0
-        is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
-        is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_LED_CONTROL);
+        is31fl3737_select_page(addr, IS31FL3737_COMMAND_LED_CONTROL);
+
         for (int i = 0; i < IS31FL3737_LED_CONTROL_REGISTER_COUNT; i++) {
             is31fl3737_write_register(addr, i, g_led_control_registers[index][i]);
         }
-- 
cgit v1.2.3