From d92ffd1157e3ecc4ae2dbf8548c45c8b0269f664 Mon Sep 17 00:00:00 2001 From: Dasky <32983009+daskygit@users.noreply.github.com> Date: Sat, 30 Jan 2021 03:53:56 +0000 Subject: Adds AT90USB162 support (#11570) * at90usb162 support * fix missing bracket * Apply suggestions from code review Co-authored-by: Ryan Co-authored-by: Ryan --- docs/spi_driver.md | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'docs/spi_driver.md') diff --git a/docs/spi_driver.md b/docs/spi_driver.md index 1d432432ad..03c008da2a 100644 --- a/docs/spi_driver.md +++ b/docs/spi_driver.md @@ -6,12 +6,12 @@ The SPI Master drivers used in QMK have a set of common functions to allow porta No special setup is required - just connect the `SS`, `SCK`, `MOSI` and `MISO` pins of your SPI devices to the matching pins on the MCU: -|MCU |`SS`|`SCK`|`MOSI`|`MISO`| -|---------------|----|-----|------|------| -|ATMega16/32U2/4|`B0`|`B1` |`B2` |`B3` | -|AT90USB64/128 |`B0`|`B1` |`B2` |`B3` | -|ATmega32A |`B4`|`B7` |`B5` |`B6` | -|ATmega328/P |`B2`|`B5` |`B3` |`B4` | +|MCU |`SS`|`SCK`|`MOSI`|`MISO`| +|-----------------|----|-----|------|------| +|ATMega16/32U2/4 |`B0`|`B1` |`B2` |`B3` | +|AT90USB64/128/162|`B0`|`B1` |`B2` |`B3` | +|ATmega32A |`B4`|`B7` |`B5` |`B6` | +|ATmega328/P |`B2`|`B5` |`B3` |`B4` | You may use more than one slave select pin, not just the `SS` pin. This is useful when you have multiple devices connected and need to communicate with them individually. `SPI_SS_PIN` can be passed to `spi_start()` to refer to `SS`. -- cgit v1.2.3