From b62e160a8950f451b08f1fee0109e60a58c5ddaa Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 21 Aug 2019 17:07:49 -0700 Subject: Additional changes for Layer State typedef compatibility (#5906) * Additional changes for Layer State typedef compatibility * Replace biton32 with get_highest_layer in docs * Change additional layer structure code * Fix uGFX reference issue * Remove dynamic_keymap check * Where did all these extra spaces come from Co-Authored-By: fauxpark --- docs/feature_oled_driver.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/feature_oled_driver.md') diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md index 503e438288..9d19beedb2 100644 --- a/docs/feature_oled_driver.md +++ b/docs/feature_oled_driver.md @@ -31,7 +31,7 @@ This enables the feature and the `OLED_DRIVER_ENABLE` define. Then in your `keym void oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); - switch (biton32(layer_state)) { + switch (get_highest_layer(layer_state)) { case _QWERTY: oled_write_P(PSTR("Default\n"), false); break; -- cgit v1.2.3 From 957070a6b5886719557b6880afa7e3716548c18a Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sun, 25 Aug 2019 14:37:55 -0500 Subject: Added OLED Display autoscroll during periods of OLED data inactivity (#6546) * Added OLED Display autoscroll during periods of OLED data inactivity. * Fixing compile errors * Feedback from review --- docs/feature_oled_driver.md | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'docs/feature_oled_driver.md') diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md index 9d19beedb2..623f1816ac 100644 --- a/docs/feature_oled_driver.md +++ b/docs/feature_oled_driver.md @@ -96,17 +96,19 @@ void oled_task_user(void) { ## Basic Configuration -| Define | Default | Description | -|------------------------|-------------------|----------------------------------------------------------------------------------------------------------------------------| -| `OLED_DISPLAY_ADDRESS` | `0x3C` | The i2c address of the OLED Display | -| `OLED_FONT_H` | `"glcdfont.c"` | The font code file to use for custom fonts | -| `OLED_FONT_START` | `0` | The starting characer index for custom fonts | -| `OLED_FONT_END` | `224` | The ending characer index for custom fonts | -| `OLED_FONT_WIDTH` | `6` | The font width | -| `OLED_FONT_HEIGHT` | `8` | The font height (untested) | -| `OLED_DISABLE_TIMEOUT` | *Not defined* | Disables the built in OLED timeout feature. Useful when implementing custom timeout rules. | -| `OLED_IC` | `OLED_IC_SSD1306` | Set to `OLED_IC_SH1106` if you're using the SH1106 OLED controller. | -| `OLED_COLUMN_OFFSET` | `0` | (SH1106 only.) Shift output to the right this many pixels.
Useful for 128x64 displays centered on a 132x64 SH1106 IC. | +| Define | Default | Description | +|----------------------------|-------------------|----------------------------------------------------------------------------------------------------------------------------| +| `OLED_DISPLAY_ADDRESS` | `0x3C` | The i2c address of the OLED Display | +| `OLED_FONT_H` | `"glcdfont.c"` | The font code file to use for custom fonts | +| `OLED_FONT_START` | `0` | The starting characer index for custom fonts | +| `OLED_FONT_END` | `224` | The ending characer index for custom fonts | +| `OLED_FONT_WIDTH` | `6` | The font width | +| `OLED_FONT_HEIGHT` | `8` | The font height (untested) | +| `OLED_TIMEOUT` | `60000` | Turns off the OLED screen after 60000ms of keyboard inactivity. Helps reduce OLED Burn-in. Set to 0 to disable. | +| `OLED_SCROLL_TIMEOUT` | `0` | Scrolls the OLED screen after 0ms of OLED inactivity. Helps reduce OLED Burn-in. Set to 0 to disable. | +| `OLED_SCROLL_TIMEOUT_RIGHT`| *Not defined* | Scroll timeout direction is right when defined, left when undefined. | +| `OLED_IC` | `OLED_IC_SSD1306` | Set to `OLED_IC_SH1106` if you're using the SH1106 OLED controller. | +| `OLED_COLUMN_OFFSET` | `0` | (SH1106 only.) Shift output to the right this many pixels.
Useful for 128x64 displays centered on a 132x64 SH1106 IC. | ## 128x64 & Custom sized OLED Displays -- cgit v1.2.3 From be6562a22335b85e9904c0f7cc748943c9e809a7 Mon Sep 17 00:00:00 2001 From: Thomas Baart Date: Sun, 3 Nov 2019 23:34:47 +0100 Subject: Adds raw write functions to the OLED driver (#7237) * Added oled_write_raw and oled_write_raw_P functions to the OLED driver * Added oled_write_raw method calls to feature_oled_driver.md --- docs/feature_oled_driver.md | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'docs/feature_oled_driver.md') diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md index 623f1816ac..b124ba5a8f 100644 --- a/docs/feature_oled_driver.md +++ b/docs/feature_oled_driver.md @@ -229,6 +229,12 @@ void oled_write_P(const char *data, bool invert); // Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM void oled_write_ln_P(const char *data, bool invert); +// Writes a string to the buffer at current cursor position +void oled_write_raw(const char *data, uint16_t size); + +// Writes a PROGMEM string to the buffer at current cursor position +void oled_write_raw_P(const char *data, uint16_t size); + // Can be used to manually turn on the screen if it is off // Returns true if the screen was on or turns on bool oled_on(void); -- cgit v1.2.3