From 27967f20086c4e3a86a4a442429a12acc330495c Mon Sep 17 00:00:00 2001 From: tmk Date: Wed, 24 Sep 2014 15:50:29 +0900 Subject: Add TMK converter support to Next converter - change protocol stack to LUFA --- converter/next_usb/Makefile | 26 ++++++++++++++++- converter/next_usb/Makefile.pjrc | 63 ++++++++++++++++++++++++++++++++++++++++ converter/next_usb/config.h | 38 ++++++++++++++++++++++++ 3 files changed, 126 insertions(+), 1 deletion(-) create mode 100644 converter/next_usb/Makefile.pjrc (limited to 'converter/next_usb') diff --git a/converter/next_usb/Makefile b/converter/next_usb/Makefile index 51d9de6b11..fef539a147 100644 --- a/converter/next_usb/Makefile +++ b/converter/next_usb/Makefile @@ -20,6 +20,7 @@ CONFIG_H = config.h MCU = atmega32u4 # Teensy 2.0 #MCU = at90usb646 # Teensy++ 1.0 #MCU = at90usb1286 # Teensy++ 2.0 +#MCU = atmega32u2 # TMK converter # Processor frequency. @@ -30,6 +31,29 @@ MCU = atmega32u4 # Teensy 2.0 F_CPU = 16000000 +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + # Boot Section Size in *bytes* # Teensy halfKay 512 # Teensy++ halfKay 1024 @@ -58,6 +82,6 @@ VPATH += $(TOP_DIR) include $(TOP_DIR)/protocol.mk -include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/protocol/lufa.mk include $(TOP_DIR)/common.mk include $(TOP_DIR)/rules.mk diff --git a/converter/next_usb/Makefile.pjrc b/converter/next_usb/Makefile.pjrc new file mode 100644 index 0000000000..51d9de6b11 --- /dev/null +++ b/converter/next_usb/Makefile.pjrc @@ -0,0 +1,63 @@ +# Target file name (without extension). +TARGET = next_usb + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = keymap.c \ + matrix.c \ + led.c + +CONFIG_H = config.h + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# *Comment out* to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#NKRO_ENABLE = yes # USB Nkey Rollover + +SRC += next_kbd.c + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + + +include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/converter/next_usb/config.h b/converter/next_usb/config.h index b3d188b0c1..cd80b5af1b 100644 --- a/converter/next_usb/config.h +++ b/converter/next_usb/config.h @@ -60,6 +60,7 @@ POSSIBILITY OF SUCH DAMAGE. //#define TEENSY_CONFIG 1 #define PRO_MICRO_CONFIG 1 +//#define TMK_CONFIG 1 // comment out if you don't want the keyboard's LEDs to flash upon initialization #define NEXT_KBD_INIT_FLASH_LEDS @@ -143,6 +144,43 @@ POSSIBILITY OF SUCH DAMAGE. #endif //================= End of Teensy 2.0 Configuration ================== + +//================ Start of TMK converter Configuration ================= +#ifdef TMK_CONFIG + +// this is the debugging LED that flashes when a key is being pressed +// comment out in order to disable debugging LED +#define NEXT_KBD_LED1_PORT PORTD +#define NEXT_KBD_LED1_PIN PIND +#define NEXT_KBD_LED1_DDR DDRD +#define NEXT_KBD_LED1_BIT 6 + +#define NEXT_KBD_LED1_ON NEXT_KBD_LED1_PORT |= (1<mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))|| \ -- cgit v1.2.3