From 744af003befb3f5cf6dc6b6f3e581f288d598f96 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Wed, 6 Jul 2022 19:27:15 +0100 Subject: Add kb2040 and sparkfun rp2040 converters (#17514) --- data/mappings/defaults.json | 12 +++ data/schemas/keyboard.jsonschema | 2 +- platforms/chibios/boards/QMK_PM2040/board/board.mk | 9 ++ .../chibios/boards/QMK_PM2040/configs/board.h | 12 +++ .../chibios/boards/QMK_PM2040/configs/chconf.h | 13 +++ .../chibios/boards/QMK_PM2040/configs/config.h | 21 +++++ .../chibios/boards/QMK_PM2040/configs/halconf.h | 9 ++ .../chibios/boards/QMK_PM2040/configs/mcuconf.h | 98 ++++++++++++++++++++++ .../converters/promicro_to_kb2040/_pin_defs.h | 36 ++++++++ .../converters/promicro_to_kb2040/converter.mk | 9 ++ .../promicro_to_promicro_rp2040/_pin_defs.h | 36 ++++++++ .../promicro_to_promicro_rp2040/converter.mk | 9 ++ 12 files changed, 265 insertions(+), 1 deletion(-) create mode 100644 platforms/chibios/boards/QMK_PM2040/board/board.mk create mode 100644 platforms/chibios/boards/QMK_PM2040/configs/board.h create mode 100644 platforms/chibios/boards/QMK_PM2040/configs/chconf.h create mode 100644 platforms/chibios/boards/QMK_PM2040/configs/config.h create mode 100644 platforms/chibios/boards/QMK_PM2040/configs/halconf.h create mode 100644 platforms/chibios/boards/QMK_PM2040/configs/mcuconf.h create mode 100644 platforms/chibios/converters/promicro_to_kb2040/_pin_defs.h create mode 100644 platforms/chibios/converters/promicro_to_kb2040/converter.mk create mode 100644 platforms/chibios/converters/promicro_to_promicro_rp2040/_pin_defs.h create mode 100644 platforms/chibios/converters/promicro_to_promicro_rp2040/converter.mk diff --git a/data/mappings/defaults.json b/data/mappings/defaults.json index e62ab688d6..c6cb53f4c3 100644 --- a/data/mappings/defaults.json +++ b/data/mappings/defaults.json @@ -16,6 +16,18 @@ "board": "QMK_PROTON_C", "pin_compatible": "promicro" }, + "kb2040": { + "processor": "RP2040", + "bootloader": "rp2040", + "board": "QMK_PM2040", + "pin_compatible": "promicro" + }, + "promicro_rp2040": { + "processor": "RP2040", + "bootloader": "rp2040", + "board": "QMK_PM2040", + "pin_compatible": "promicro" + }, "bluepill": { "processor": "STM32F103", "bootloader": "stm32duino", diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 320974f0c4..166a5d4d3b 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -34,7 +34,7 @@ }, "development_board": { "type": "string", - "enum": ["promicro", "elite_c", "proton_c", "bluepill", "blackpill_f401", "blackpill_f411"] + "enum": ["promicro", "elite_c", "proton_c", "kb2040", "promicro_rp2040", "bluepill", "blackpill_f401", "blackpill_f411"] }, "pin_compatible": { "type": "string", diff --git a/platforms/chibios/boards/QMK_PM2040/board/board.mk b/platforms/chibios/boards/QMK_PM2040/board/board.mk new file mode 100644 index 0000000000..911cc5a058 --- /dev/null +++ b/platforms/chibios/boards/QMK_PM2040/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/RP_PICO_RP2040/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/RP_PICO_RP2040 + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/boards/QMK_PM2040/configs/board.h b/platforms/chibios/boards/QMK_PM2040/configs/board.h new file mode 100644 index 0000000000..433e1c527f --- /dev/null +++ b/platforms/chibios/boards/QMK_PM2040/configs/board.h @@ -0,0 +1,12 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include_next "board.h" + +#undef BOARD_RP_PICO_RP2040 +#define BOARD_PM2040 + +#undef BOARD_NAME +#define BOARD_NAME "Pro Micro RP2040" diff --git a/platforms/chibios/boards/QMK_PM2040/configs/chconf.h b/platforms/chibios/boards/QMK_PM2040/configs/chconf.h new file mode 100644 index 0000000000..d53f57edd9 --- /dev/null +++ b/platforms/chibios/boards/QMK_PM2040/configs/chconf.h @@ -0,0 +1,13 @@ +// Copyright 2022 Stefan Kerkmann +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#define CH_CFG_SMP_MODE TRUE +#define CH_CFG_ST_RESOLUTION 32 +#define CH_CFG_ST_FREQUENCY 1000000 +#define CH_CFG_INTERVALS_SIZE 32 +#define CH_CFG_TIME_TYPES_SIZE 32 +#define CH_CFG_ST_TIMEDELTA 20 + +#include_next diff --git a/platforms/chibios/boards/QMK_PM2040/configs/config.h b/platforms/chibios/boards/QMK_PM2040/configs/config.h new file mode 100644 index 0000000000..6b1dcca938 --- /dev/null +++ b/platforms/chibios/boards/QMK_PM2040/configs/config.h @@ -0,0 +1,21 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#ifndef I2C_DRIVER +# define I2C_DRIVER I2CD2 +#endif +#ifndef I2C1_SDA_PIN +# define I2C1_SDA_PIN D2 +#endif +#ifndef I2C1_SCL_PIN +# define I2C1_SCL_PIN D3 +#endif + +#ifndef RP2040_BOOTLOADER_DOUBLE_TAP_RESET +# define RP2040_BOOTLOADER_DOUBLE_TAP_RESET +#endif +#ifndef RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT +# define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 500U +#endif diff --git a/platforms/chibios/boards/QMK_PM2040/configs/halconf.h b/platforms/chibios/boards/QMK_PM2040/configs/halconf.h new file mode 100644 index 0000000000..d7a58f0ea6 --- /dev/null +++ b/platforms/chibios/boards/QMK_PM2040/configs/halconf.h @@ -0,0 +1,9 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#define HAL_USE_I2C TRUE +#define HAL_USE_SPI TRUE + +#include_next diff --git a/platforms/chibios/boards/QMK_PM2040/configs/mcuconf.h b/platforms/chibios/boards/QMK_PM2040/configs/mcuconf.h new file mode 100644 index 0000000000..a737b36c1c --- /dev/null +++ b/platforms/chibios/boards/QMK_PM2040/configs/mcuconf.h @@ -0,0 +1,98 @@ +/* + ChibiOS - Copyright (C) 2006..2021 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * RP2040_MCUCONF drivers configuration. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...1 Lowest...Highest. + */ + +#define RP2040_MCUCONF + +/* + * HAL driver system settings. + */ +#define RP_NO_INIT FALSE +#define RP_CORE1_START FALSE +#define RP_CORE1_VECTORS_TABLE _vectors +#define RP_CORE1_ENTRY_POINT _crt0_c1_entry +#define RP_CORE1_STACK_END __c1_main_stack_end__ + +/* + * IRQ system settings. + */ +#define RP_IRQ_SYSTICK_PRIORITY 2 +#define RP_IRQ_TIMER_ALARM0_PRIORITY 2 +#define RP_IRQ_TIMER_ALARM1_PRIORITY 2 +#define RP_IRQ_TIMER_ALARM2_PRIORITY 2 +#define RP_IRQ_TIMER_ALARM3_PRIORITY 2 +#define RP_IRQ_UART0_PRIORITY 3 +#define RP_IRQ_UART1_PRIORITY 3 +#define RP_IRQ_SPI0_PRIORITY 2 +#define RP_IRQ_SPI1_PRIORITY 2 +#define RP_IRQ_USB0_PRIORITY 3 +#define RP_IRQ_I2C0_PRIORITY 2 +#define RP_IRQ_I2C1_PRIORITY 2 + +/* + * ADC driver system settings. + */ +#define RP_ADC_USE_ADC1 FALSE + +/* + * SIO driver system settings. + */ +#define RP_SIO_USE_UART0 FALSE +#define RP_SIO_USE_UART1 FALSE + +/* + * SPI driver system settings. + */ +#define RP_SPI_USE_SPI0 TRUE +#define RP_SPI_USE_SPI1 FALSE +#define RP_SPI_SPI0_RX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY +#define RP_SPI_SPI0_TX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY +#define RP_SPI_SPI1_RX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY +#define RP_SPI_SPI1_TX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY +#define RP_SPI_SPI0_DMA_PRIORITY 1 +#define RP_SPI_SPI1_DMA_PRIORITY 1 +#define RP_SPI_DMA_ERROR_HOOK(spip) + +/* + * I2C driver system settings. + */ +#define RP_I2C_USE_I2C0 FALSE +#define RP_I2C_USE_I2C1 TRUE +#define RP_I2C_BUSY_TIMEOUT 50 +#define RP_I2C_ADDRESS_MODE_10BIT FALSE + +/* + * USB driver system settings. + */ +#define RP_USB_USE_USBD0 TRUE +#define RP_USB_FORCE_VBUS_DETECT TRUE +#define RP_USE_EXTERNAL_VBUS_DETECT FALSE +#define RP_USB_USE_SOF_INTR TRUE +#define RP_USB_USE_ERROR_DATA_SEQ_INTR FALSE + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/converters/promicro_to_kb2040/_pin_defs.h b/platforms/chibios/converters/promicro_to_kb2040/_pin_defs.h new file mode 100644 index 0000000000..0a3110890b --- /dev/null +++ b/platforms/chibios/converters/promicro_to_kb2040/_pin_defs.h @@ -0,0 +1,36 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 0U +#define D2 1U +// GND +// GND +#define D1 2U +#define D0 3U +#define D4 4U +#define C6 5U +#define D7 6U +#define E6 7U +#define B4 8U +#define B5 9U + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 29U +#define F5 28U +#define F6 27U +#define F7 26U +#define B1 18U +#define B3 20U +#define B2 19U +#define B6 10U + +// LEDs (Mapped to QT connector to avoid collisions with button/neopixel) +#define D5 12U +#define B0 13U diff --git a/platforms/chibios/converters/promicro_to_kb2040/converter.mk b/platforms/chibios/converters/promicro_to_kb2040/converter.mk new file mode 100644 index 0000000000..6ffee357b3 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_kb2040/converter.mk @@ -0,0 +1,9 @@ +# Adafruit KB2040 MCU settings for converting AVR projects +MCU := RP2040 +BOARD := QMK_PM2040 +BOOTLOADER := rp2040 + +# These are defaults based on what has been implemented for RP2040 boards +SERIAL_DRIVER ?= vendor +WS2812_DRIVER ?= vendor +BACKLIGHT_DRIVER ?= software diff --git a/platforms/chibios/converters/promicro_to_promicro_rp2040/_pin_defs.h b/platforms/chibios/converters/promicro_to_promicro_rp2040/_pin_defs.h new file mode 100644 index 0000000000..0a1f4112a3 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_promicro_rp2040/_pin_defs.h @@ -0,0 +1,36 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 0U +#define D2 1U +// GND +// GND +#define D1 2U +#define D0 3U +#define D4 4U +#define C6 5U +#define D7 6U +#define E6 7U +#define B4 8U +#define B5 9U + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 29U +#define F5 28U +#define F6 27U +#define F7 26U +#define B1 22U +#define B3 20U +#define B2 23U +#define B6 21U + +// LEDs (Mapped to QT connector to avoid collisions with button/neopixel) +#define D5 17U +#define B0 16U diff --git a/platforms/chibios/converters/promicro_to_promicro_rp2040/converter.mk b/platforms/chibios/converters/promicro_to_promicro_rp2040/converter.mk new file mode 100644 index 0000000000..03863eeb02 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_promicro_rp2040/converter.mk @@ -0,0 +1,9 @@ +# Sparkfun Pro Micro RP2040 MCU settings for converting AVR projects +MCU := RP2040 +BOARD := QMK_PM2040 +BOOTLOADER := rp2040 + +# These are defaults based on what has been implemented for RP2040 boards +SERIAL_DRIVER ?= vendor +WS2812_DRIVER ?= vendor +BACKLIGHT_DRIVER ?= software -- cgit v1.2.3