From 60c5bd7b5e0e75f48d9731118b92a3add3342efd Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Wed, 8 Sep 2021 02:23:11 +0100 Subject: handwired/dactyl - Refactor use of legacy i2c implementation (#14344) --- keyboards/handwired/dactyl/dactyl.c | 1 - keyboards/handwired/dactyl/dactyl.h | 5 +- keyboards/handwired/dactyl/i2cmaster.h | 178 ---------------------------- keyboards/handwired/dactyl/matrix.c | 99 ++++++++-------- keyboards/handwired/dactyl/rules.mk | 4 +- keyboards/handwired/dactyl/twimaster.c | 207 --------------------------------- 6 files changed, 52 insertions(+), 442 deletions(-) delete mode 100644 keyboards/handwired/dactyl/i2cmaster.h delete mode 100644 keyboards/handwired/dactyl/twimaster.c diff --git a/keyboards/handwired/dactyl/dactyl.c b/keyboards/handwired/dactyl/dactyl.c index ff9b4e08af..be815777bd 100644 --- a/keyboards/handwired/dactyl/dactyl.c +++ b/keyboards/handwired/dactyl/dactyl.c @@ -1,5 +1,4 @@ #include "dactyl.h" -#include "i2cmaster.h" #ifdef SWAP_HANDS_ENABLE __attribute__ ((weak)) diff --git a/keyboards/handwired/dactyl/dactyl.h b/keyboards/handwired/dactyl/dactyl.h index 3589e1d3c8..f7be886ac6 100644 --- a/keyboards/handwired/dactyl/dactyl.h +++ b/keyboards/handwired/dactyl/dactyl.h @@ -4,12 +4,11 @@ #include "quantum.h" #include #include -#include "i2cmaster.h" +#include "i2c_master.h" #include #define I2C_ADDR 0b0100000 -#define I2C_ADDR_WRITE ( (I2C_ADDR<<1) | I2C_WRITE ) -#define I2C_ADDR_READ ( (I2C_ADDR<<1) | I2C_READ ) +#define I2C_TIMEOUT 100 #define IODIRA 0x00 // i/o direction register #define IODIRB 0x01 #define GPPUA 0x0C // GPIO pull-up resistor register diff --git a/keyboards/handwired/dactyl/i2cmaster.h b/keyboards/handwired/dactyl/i2cmaster.h deleted file mode 100644 index 3917b9e6c0..0000000000 --- a/keyboards/handwired/dactyl/i2cmaster.h +++ /dev/null @@ -1,178 +0,0 @@ -#ifndef _I2CMASTER_H -#define _I2CMASTER_H 1 -/************************************************************************* -* Title: C include file for the I2C master interface -* (i2cmaster.S or twimaster.c) -* Author: Peter Fleury http://jump.to/fleury -* File: $Id: i2cmaster.h,v 1.10 2005/03/06 22:39:57 Peter Exp $ -* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 -* Target: any AVR device -* Usage: see Doxygen manual -**************************************************************************/ - -#ifdef DOXYGEN -/** - @defgroup pfleury_ic2master I2C Master library - @code #include @endcode - - @brief I2C (TWI) Master Software Library - - Basic routines for communicating with I2C slave devices. This single master - implementation is limited to one bus master on the I2C bus. - - This I2c library is implemented as a compact assembler software implementation of the I2C protocol - which runs on any AVR (i2cmaster.S) and as a TWI hardware interface for all AVR with built-in TWI hardware (twimaster.c). - Since the API for these two implementations is exactly the same, an application can be linked either against the - software I2C implementation or the hardware I2C implementation. - - Use 4.7k pull-up resistor on the SDA and SCL pin. - - Adapt the SCL and SDA port and pin definitions and eventually the delay routine in the module - i2cmaster.S to your target when using the software I2C implementation ! - - Adjust the CPU clock frequence F_CPU in twimaster.c or in the Makfile when using the TWI hardware implementaion. - - @note - The module i2cmaster.S is based on the Atmel Application Note AVR300, corrected and adapted - to GNU assembler and AVR-GCC C call interface. - Replaced the incorrect quarter period delays found in AVR300 with - half period delays. - - @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury - - @par API Usage Example - The following code shows typical usage of this library, see example test_i2cmaster.c - - @code - - #include - - - #define Dev24C02 0xA2 // device address of EEPROM 24C02, see datasheet - - int main(void) - { - unsigned char ret; - - i2c_init(); // initialize I2C library - - // write 0x75 to EEPROM address 5 (Byte Write) - i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode - i2c_write(0x05); // write address = 5 - i2c_write(0x75); // write value 0x75 to EEPROM - i2c_stop(); // set stop conditon = release bus - - - // read previously written value back from EEPROM address 5 - i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode - - i2c_write(0x05); // write address = 5 - i2c_rep_start(Dev24C02+I2C_READ); // set device address and read mode - - ret = i2c_readNak(); // read one byte from EEPROM - i2c_stop(); - - for(;;); - } - @endcode - -*/ -#endif /* DOXYGEN */ - -/**@{*/ - -#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304 -#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !" -#endif - -#include - -/** defines the data direction (reading from I2C device) in i2c_start(),i2c_rep_start() */ -#define I2C_READ 1 - -/** defines the data direction (writing to I2C device) in i2c_start(),i2c_rep_start() */ -#define I2C_WRITE 0 - - -/** - @brief initialize the I2C master interace. Need to be called only once - @param void - @return none - */ -extern void i2c_init(void); - - -/** - @brief Terminates the data transfer and releases the I2C bus - @param void - @return none - */ -extern void i2c_stop(void); - - -/** - @brief Issues a start condition and sends address and transfer direction - - @param addr address and transfer direction of I2C device - @retval 0 device accessible - @retval 1 failed to access device - */ -extern unsigned char i2c_start(unsigned char addr); - - -/** - @brief Issues a repeated start condition and sends address and transfer direction - - @param addr address and transfer direction of I2C device - @retval 0 device accessible - @retval 1 failed to access device - */ -extern unsigned char i2c_rep_start(unsigned char addr); - - -/** - @brief Issues a start condition and sends address and transfer direction - - If device is busy, use ack polling to wait until device ready - @param addr address and transfer direction of I2C device - @return none - */ -extern void i2c_start_wait(unsigned char addr); - - -/** - @brief Send one byte to I2C device - @param data byte to be transfered - @retval 0 write successful - @retval 1 write failed - */ -extern unsigned char i2c_write(unsigned char data); - - -/** - @brief read one byte from the I2C device, request more data from device - @return byte read from I2C device - */ -extern unsigned char i2c_readAck(void); - -/** - @brief read one byte from the I2C device, read is followed by a stop condition - @return byte read from I2C device - */ -extern unsigned char i2c_readNak(void); - -/** - @brief read one byte from the I2C device - - Implemented as a macro, which calls either i2c_readAck or i2c_readNak - - @param ack 1 send ack, request more data from device
- 0 send nak, read is followed by a stop condition - @return byte read from I2C device - */ -extern unsigned char i2c_read(unsigned char ack); -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - - -/**@}*/ -#endif diff --git a/keyboards/handwired/dactyl/matrix.c b/keyboards/handwired/dactyl/matrix.c index 615621522d..a21cd08e14 100644 --- a/keyboards/handwired/dactyl/matrix.c +++ b/keyboards/handwired/dactyl/matrix.c @@ -25,7 +25,7 @@ along with this program. If not, see . #include "util.h" #include "matrix.h" #include "dactyl.h" -#include "i2cmaster.h" +#include "i2c_master.h" #include "timer.h" @@ -147,9 +147,6 @@ void init_expander(void) { #endif } - expander_status = i2c_start(I2C_ADDR_WRITE); if (expander_status) goto out; - expander_status = i2c_write(IODIRA); if (expander_status) goto out; - /* Pin direction and pull-up depends on both the diode direction and on whether the column register is GPIOA or GPIOB @@ -164,50 +161,65 @@ void init_expander(void) { #if (EXPANDER_COL_REGISTER == GPIOA) # if (DIODE_DIRECTION == COL2ROW) - expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; - expander_status = i2c_write(0); if (expander_status) goto out; + uint8_t direction[2] = { + expander_input_pin_mask, + 0, + }; # elif (DIODE_DIRECTION == ROW2COL) - expander_status = i2c_write(0); if (expander_status) goto out; - expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; + uint8_t direction[2] = { + 0, + expander_input_pin_mask, + }; # endif #elif (EXPANDER_COL_REGISTER == GPIOB) # if (DIODE_DIRECTION == COL2ROW) - expander_status = i2c_write(0); if (expander_status) goto out; - expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; + uint8_t direction[2] = { + 0, + expander_input_pin_mask, + }; # elif (DIODE_DIRECTION == ROW2COL) - expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; - expander_status = i2c_write(0); if (expander_status) goto out; + uint8_t direction[2] = { + expander_input_pin_mask, + 0, + }; # endif #endif - i2c_stop(); - // set pull-up // - unused : off : 0 // - input : on : 1 // - driving : off : 0 - expander_status = i2c_start(I2C_ADDR_WRITE); if (expander_status) goto out; - expander_status = i2c_write(GPPUA); if (expander_status) goto out; #if (EXPANDER_COL_REGISTER == GPIOA) # if (DIODE_DIRECTION == COL2ROW) - expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; - expander_status = i2c_write(0); if (expander_status) goto out; + uint8_t pullup[2] = { + expander_input_pin_mask, + 0, + }; # elif (DIODE_DIRECTION == ROW2COL) - expander_status = i2c_write(0); if (expander_status) goto out; - expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; + uint8_t pullup[2] = { + 0, + expander_input_pin_mask, + }; # endif #elif (EXPANDER_COL_REGISTER == GPIOB) # if (DIODE_DIRECTION == COL2ROW) - expander_status = i2c_write(0); if (expander_status) goto out; - expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; + uint8_t pullup[2] = { + 0, + expander_input_pin_mask, + }; # elif (DIODE_DIRECTION == ROW2COL) - expander_status = i2c_write(expander_input_pin_mask); if (expander_status) goto out; - expander_status = i2c_write(0); if (expander_status) goto out; + uint8_t pullup[2] = { + expander_input_pin_mask, + 0, + }; # endif #endif -out: - i2c_stop(); + + expander_status = i2c_writeReg(I2C_ADDR, IODIRA, direction, 2, I2C_TIMEOUT); + if (expander_status) return; + + expander_status = i2c_writeReg(I2C_ADDR, GPPUA, pullup, 2, I2C_TIMEOUT); } uint8_t matrix_scan(void) @@ -337,14 +349,11 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) // Read columns from expander, unless it's in an error state if (! expander_status) { - expander_status = i2c_start(I2C_ADDR_WRITE); if (expander_status) goto out; - expander_status = i2c_write(EXPANDER_COL_REGISTER); if (expander_status) goto out; - expander_status = i2c_start(I2C_ADDR_READ); if (expander_status) goto out; - - current_matrix[current_row] |= (~i2c_readNak()) & expander_input_pin_mask; - - out: - i2c_stop(); + uint8_t state = 0; + expander_status = i2c_readReg(I2C_ADDR, EXPANDER_COL_REGISTER, &state, 1, I2C_TIMEOUT); + if (! expander_status) { + current_matrix[current_row] |= (~state) & expander_input_pin_mask; + } } // Read columns from onboard pins @@ -366,11 +375,8 @@ static void select_row(uint8_t row) { if (! expander_status) { // set active row low : 0 // set other rows hi-Z : 1 - expander_status = i2c_start(I2C_ADDR_WRITE); if (expander_status) goto out; - expander_status = i2c_write(EXPANDER_ROW_REGISTER); if (expander_status) goto out; - expander_status = i2c_write(0xFF & ~(1< http://jump.to/fleury -* File: $Id: twimaster.c,v 1.3 2005/07/02 11:14:21 Peter Exp $ -* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 -* Target: any AVR device with hardware TWI -* Usage: API compatible with I2C Software Library i2cmaster.h -**************************************************************************/ -#include -#include - -#include "i2cmaster.h" - -/* define CPU frequency in Hz here if not defined in Makefile */ -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -/* I2C clock in Hz */ -#define SCL_CLOCK 400000L - - -/************************************************************************* - Initialization of the I2C bus interface. Need to be called only once -*************************************************************************/ -void i2c_init(void) -{ - /* initialize TWI clock - * minimal values in Bit Rate Register (TWBR) and minimal Prescaler - * bits in the TWI Status Register should give us maximal possible - * I2C bus speed - about 444 kHz - * - * for more details, see 20.5.2 in ATmega16/32 secification - */ - - TWSR = 0; /* no prescaler */ - TWBR = 10; /* must be >= 10 for stable operation */ - -}/* i2c_init */ - - -/************************************************************************* - Issues a start condition and sends address and transfer direction. - return 0 = device accessible, 1= failed to access device -*************************************************************************/ -unsigned char i2c_start(unsigned char address) -{ - uint8_t twst; - - // send START condition - TWCR = (1<