summaryrefslogtreecommitdiff
path: root/tmk_core
AgeCommit message (Collapse)Author
2019-01-26DO NOT USE Merge branch 'master' into debounce_refactorAlex Ong
Merged, however now there are two debounce.h and debounce.c to mess around with and coalesce. # Conflicts: # quantum/matrix.c
2019-01-25Circular animation (#4796)Drashna Jaelre
* Add ability to animate arm_atsam led matrix from the center of a circle * Make arm_atsam led matrix circular animation circular rather than obloid * Fix indentation in tmk_core led_matrix.c
2019-01-25Add MOD_MASK_* macros to core code (#4337)Konstantin Đorđević
* Add MOD_MASK_* macros to core code * MOD_MASK_ALL → MOD_MASK_CSAG
2019-01-25Fix oneshot_time wrong type (#3696)Shihpin Tseng
* Fix oneshot_time wrong type * Fix oneshot_time_layer wrong type
2019-01-25Add support for RETRO_TAPPING to LT(layer, kc)lambda_sakura
2019-01-22Always read two bytes from the endpoint if we have two bytes to readfauxpark
When this if statement is false, it will cause the report ID to be read as the LED state. We already know there are two bytes in the endpoint, which is a reasonably good indicator that it contains a report ID, so we should always read both.
2019-01-20Tidy up IS_{,HOST_}LED_{ON,OFF} macros (#4894)Konstantin Đorđević
* Tidy up IS_{,HOST_}LED_{ON,OFF} macros * Tweak LED control docs
2019-01-17Flip definitions of macOS brightness aliasJunya Ogura
Before: KC_BRMU - Brightness Down KC_BRMD - Brightness Up After: KC_BRMU - Brightness Up KC_BRMD - Brightness Down
2019-01-17Defined IS_(HOST_)LED_ON/OFF() and improved LED documentation (#4853)DidierLoiseau
* Defined IS_(HOST_)LED_ON/OFF() and improved LED documentation * Update docs/custom_quantum_functions.md Co-Authored-By: DidierLoiseau <didierloiseau+github@gmail.com> * Update docs/custom_quantum_functions.md Co-Authored-By: DidierLoiseau <didierloiseau+github@gmail.com> * Integrated @drashna and @fauxpark's PR comments - changed all plurals of "LED" to "LEDs" in the file - rewording of the note about host_keyboard_leds() vs. led_set_user() * Update docs/custom_quantum_functions.md Co-Authored-By: DidierLoiseau <didierloiseau+github@gmail.com>
2019-01-17MacOS Brightness Alias (#4836)Jeremy Bernhardt
* Added aliases for OSX brightness * Updated docs for alises * Moved aliases, added docs to Brightness section * Update docs/keycodes.md Co-Authored-By: germ <jeremythegeek@gmail.com> * Update docs/keycodes.md Co-Authored-By: germ <jeremythegeek@gmail.com> * Update keycode.h * Update keycode.h * Update keycodes.md * Update docs/keycodes.md Co-Authored-By: germ <jeremythegeek@gmail.com>
2019-01-17Simplify split_common Code significantly (#4772)James Churchill
* Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17Add documentation and fix formating (#4860)Drashna Jaelre
2019-01-16Add some function comments in action_layer.c (#4858)Nikolaus Wittenstein
2019-01-11Improved fix for __always_inline redefinition bugJames Churchill
Instead of changing based on the version of GCC, check for the presence of the macro instead.
2019-01-11Fix Caps Lock LEDs once and for all (#4824)fauxpark
* Check the size of the SET_REPORT packet If we have two bytes, that probably means the first is a report ID. The 6KRO interface may or may not have one, but the NKRO interface always does, so we need to check this regardless of whether KEYBOARD_SHARED_EP is defined. * Fix indentation
2019-01-08Add missing parentheses to some important macros (#4775)Konstantin Đorđević
* Add missing parentheses to quantum_keycodes macros * Add missing parentheses to progmem macros
2019-01-07Update to arm_atsam wait and timer routinespatrickmt
Microsecond (us) delays are now handled by a busy wait loop according to MCU frequency. This replaces the system counter method which had an overhead of around 12us. TC5 device and supporting routines removed as it was the old us delay counter. wait_ms is now properly a macro to CLK_delay_ms. wait_us is now properly a macro to CLK_delay_us. Removed CLK_get_us as it has no use. All calls to CLK_get_ms() have been replaced by timer_read64() with corrected typing. All calls to CLK_delay_ms() have been replaced by wait_ms(). All calls to CLK_delay_us() have been replaced by wait_us() and timings verified or updated as needed after review on scope. Corrected typing of variables using 64bit ms timer readings if needed.
2019-01-07Fix indentation in tmk_core led_matrix.cIan O'Dea
2019-01-07Make arm_atsam led matrix circular animation circular rather than obloidIan O'Dea
2019-01-07Add ability to animate arm_atsam led matrix from the center of a circleIan O'Dea
2019-01-06Final HS60v2 changes. (#4790)yiancar
* initial commit, this now mostly works - RGB controls work - Dynamic keymap still broken due to eeprom - Via works * STM32 eeprom update - Update EEPROM emulation library to handle 8bit data like AVR. - This library also allows for multiple page pairs resulting in greater EEPROM size flexibility * hs60 changes * HS60 hhkb added * Update keyboards/hs60/v2/config.h Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>
2019-01-05Add underscores to names of brightness control constants in report.h (#4764)Konstantin Đorđević
2019-01-04Merge branch 'master' into debounce_refactorAlex Ong
# Conflicts: # tmk_core/common/keyboard.c
2018-12-28Keep pressed keys on layer state change (fixes #2053, #2279) (#3905)Konstantin Đorđević
* Keep pressed keys on layer state change * Add doc comment for clear_keyboard_but_mods_and_keys * Keep pressed keys only if PREVENT_STUCK_MODIFIERS is on * Check STRICT_LAYER_RELEASE instead of PREVENT_STUCK_MODIFIERS
2018-12-14Refactor quantum/split_common/i2c.c, quantum/split_common/serial.c (#4522)Takeshi ISHII
* add temporary compile test shell script * Extended support of SKIP_VERSION to make invariant compile results during testing. * build_keyboard.mk, tmk_core/rules.mk: add LIB_SRC, QUANTUM_LIB_SRC support Support compiled object enclosed in library. e.g. ``` LIB_SRC += xxxx.c xxxx.c --> xxxx.o ---> xxxx.a ``` * remove 'ifdef/ifndef USE_I2C' from quantum/split_common/{i2c|serial}.c * add SKIP_DEBUG_INFO into tmk_core/rules.mk When SKIP_DEBUG_INFO=yes is specified, do not use the -g option at compile time. * tmk_core/rules.mk: Library object need -fno-lto * add SKIP_DEBUG_INFO=yes * remove temporary compile test shell script * add '#define SOFT_SERIAL_PIN D0' to keyboards/lets_split/rev?/config.h * quantum/split_common/serial.c: Changed not to use USE_I2C.
2018-12-14Add left/right EEPROM flashing for DFU (#4560)Drashna Jaelre
2018-12-14Fix macro redefinition for GNUC compilers > 6patrickmt
GNUC compilers greater than version 6 already have the macro __always_inline defined. This fix checks GNUC version before defining the macro itself.
2018-12-14Fix up tap_code functionality (#4609)Drashna Jaelre
* Add delay in Tap Code to avoid issues I think a few people have reporting issues with it working properly, and it may be a timing issue. The 'register_code' uses this sort of delay in some of the functions, and this is probably why. Adding the 100ms delay should hopefully fix any issues with it. * Make tap_code delay configurable * Update documentation * Bring tap_code16 inline with changes * Fix type for tap_code16 Bad copy-paste job * Just use the value check for the define * Clarify timing in docs Co-Authored-By: drashna <drashna@live.com> * Wordsmithing Co-Authored-By: drashna <drashna@live.com>
2018-12-12Add standard definitions for ALGR and KC_ALGR (#4389)Konstantin Đorđević
* Add standard ALGR defition, remove (re)definitions from language files * Use ALGR(kc) consistently in ALTGR(kc) aliases * Non-Nordic keymaps should not use NO_ALGR * Add standard KC_ALGR definition * Update docs with ALGR and KC_ALGR * Update SS_ALGR and ALGR_T aliases
2018-12-10Bringing Massdrop keyboard hardware configuration to keyboard level (#4593)patrickmt
MCU Pins for debugging, LED, boot tracing, and shift registers are now configurable at keyboard level. Macros led_* replaced by DBG_LED_* Macros m15_* replaced by DBG_1_* Macros m27_* replaced by DBG_2_* Macros m28_* replaced by DBG_3_* For CTRL and ALT keyboards, debug boot tracing pin default now set to pad M27 instead of M28 since although M28 is not being used, it is technically a signal for USB port detection. m15_print(...) renamed to dbg_print(...) to get away from hard coded port names. dbg_print function now follows similar pattern to debug led output.
2018-12-06Vertical animation support for arm_atsam led_matrix (#4538)Ian O'Dea
* Add initial support for vertically-oriented animations * DRY up vertical animation support * Fix animation code for arm_atsam led_matrix to work in all directions * Adjust py calculation to base off bottom rather than top
2018-12-05Only try to read the report ID from SetReport when the keyboard is part of ↵fauxpark
the shared EP Fixes #4471 Fixes #4517
2018-12-04adding Hadron v3 keyboard, QWIIC devices support, haptic feedback support ↵ishtob
(#4462) * add initial support for hadron ver3 * add initial support for hadron ver3 * pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display * initial work on OLED using qwiic driver * early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality * moved oled defines to config.h and added ifndef to micro_oled driver * WORKING :D - note, still work in progress to get the start location correct on the 128x32 display. * added equation to automatically calculate display offset based on screen width * adding time-out timer to oled display * changed read lock staus via read_led_state * lock indications fixes * Added scroll lock indication to oled * add support for DRV2605 haptic driver * Improve readabiity of DRV2605 driver. -added typedef for waveform library -added unions for registers * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Fixes for PR * PR fixes * fix old persistent layer function to use new set_single_persistent_default_layer * fix issues with changing makefile defines that broken per-key haptic pulse * Comment fixes * Add definable parameter and auto-calibration based on motor choice
2018-11-28Add Extrakey support for Brightness up/down (#4477)Giuseppe Rota
2018-11-27fixed misplaced paranthesis in arm usb mouse send function (#4478)Christon DeWan
bug was causing lots of dropped events for me.
2018-11-27Fixed docs/newbs_testing_debugging.md and tmk_core/common/print.hmtei
2018-11-21Fix raw hid define for chibios (#4460)yiancar
2018-11-15Use a single endpoint for HID reports (#3951)James Laird-Wah
* Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-14Backlight status functions (#4259)Phillip Tennen
* add functions to set specific backlight state * add function to query backlight state * update documentation with new backlight functions * Update tmk_core/common/backlight.c Co-Authored-By: codyd51 <phillip.ennen@gmail.com> * Update tmk_core/common/backlight.h Co-Authored-By: codyd51 <phillip.ennen@gmail.com> * update docs for is_backlight_enabled() name change
2018-11-06Add localized LED flash effect on keypress to Massdrop ALT (#4340)Sean Dwyer
2018-11-06Fix Spacing issue in makefile that breaks Terminal configDrashna Jaelre
2018-11-06command.h include was not set correctlyDrashna Jaelre
2018-11-06Fix Terminal feature on ChibiOSDrashna Jaelre
2018-11-02USB Suspend for arm_atsam protocolpatrickmt
Rewrote USB state tracking for implementation of suspend state. Updated suspend.c in entirety. Main subtasks (generally hardware related) are now run prior to keyboard task.
2018-11-02Fix CTRL/ALT keyboard does not wake computer from sleeppatrickmt
Fix for Massdrop CTRL and ALT keyboards not waking computer from sleep
2018-11-02Move disable JTAG code from `keyboard_init` to `keyboard_setup`Danny Nguyen
This way all split keyboards are using that code instead of just those using split_common with the fix
2018-11-02Add support for Atmega32A to pin declarations and universal matrix (#4015)Jack Humbert
* add computed pins from mcu type * update for atmega32a * doc typo * add atmega16 chips, link to references * remove avr include from config * exclude assembler in config.h includes * consolodate options, add 646 * fix typo in pindef
2018-10-29Fix undefined reference to `console_printf` for CTRL and ALT keyboardspatrickmt
Fix undefined reference to `console_printf` for CTRL and ALT keyboards when enabling CONSOLE_ENABLE
2018-10-27Add Bootmagic Lite to QMK (#4215)Drashna Jaelre
* Preliminary additon of bootmagic lite functionality * Cleanup code * Clean up bootmagic code * Add documentation and clean up code * Make 'lite' an option for BOOTMAGIC_ENABLE * Update Templates with note about Bootmagic Lite option * Detect Debounce variable * Make sure debounce is a non-zero number * Capitalize Bootmagic * Capitalize bootmagic * Update wording * Re-add EEPROM reset, by popular demand And add eeprom-less version to drashna userspace for his sanity * Fix spacing * Set BOOTMAGIC_ENABLE to use full/lite/off And default yes to "full" for compatibility * Add Bootmagic lite info to templates * Remove text from makefiles * Cleanup of makefile * mention yes in bootmagic docs * Wordsmitthing the docs * Fix white spaces * Readd default bootmagic setting, because it's necessary
2018-10-27Add delayed flashing option for DFU Util (#4225)Drashna Jaelre
* Add delayed flashing option for DFU Util * Use a loop to make code cleaner * Make delay configurable but default to 10 * Better formatting of check