summaryrefslogtreecommitdiff
path: root/tmk_core/protocol
AgeCommit message (Collapse)Author
2018-12-14Fix macro redefinition for GNUC compilers > 6patrickmt
GNUC compilers greater than version 6 already have the macro __always_inline defined. This fix checks GNUC version before defining the macro itself.
2018-12-10Bringing Massdrop keyboard hardware configuration to keyboard level (#4593)patrickmt
MCU Pins for debugging, LED, boot tracing, and shift registers are now configurable at keyboard level. Macros led_* replaced by DBG_LED_* Macros m15_* replaced by DBG_1_* Macros m27_* replaced by DBG_2_* Macros m28_* replaced by DBG_3_* For CTRL and ALT keyboards, debug boot tracing pin default now set to pad M27 instead of M28 since although M28 is not being used, it is technically a signal for USB port detection. m15_print(...) renamed to dbg_print(...) to get away from hard coded port names. dbg_print function now follows similar pattern to debug led output.
2018-12-06Vertical animation support for arm_atsam led_matrix (#4538)Ian O'Dea
* Add initial support for vertically-oriented animations * DRY up vertical animation support * Fix animation code for arm_atsam led_matrix to work in all directions * Adjust py calculation to base off bottom rather than top
2018-12-05Only try to read the report ID from SetReport when the keyboard is part of ↵fauxpark
the shared EP Fixes #4471 Fixes #4517
2018-11-27fixed misplaced paranthesis in arm usb mouse send function (#4478)Christon DeWan
bug was causing lots of dropped events for me.
2018-11-21Fix raw hid define for chibios (#4460)yiancar
2018-11-15Use a single endpoint for HID reports (#3951)James Laird-Wah
* Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
2018-11-06Add localized LED flash effect on keypress to Massdrop ALT (#4340)Sean Dwyer
2018-11-02USB Suspend for arm_atsam protocolpatrickmt
Rewrote USB state tracking for implementation of suspend state. Updated suspend.c in entirety. Main subtasks (generally hardware related) are now run prior to keyboard task.
2018-11-02Fix CTRL/ALT keyboard does not wake computer from sleeppatrickmt
Fix for Massdrop CTRL and ALT keyboards not waking computer from sleep
2018-11-02Add support for Atmega32A to pin declarations and universal matrix (#4015)Jack Humbert
* add computed pins from mcu type * update for atmega32a * doc typo * add atmega16 chips, link to references * remove avr include from config * exclude assembler in config.h includes * consolodate options, add 646 * fix typo in pindef
2018-10-27Fix mouse_send() on chibiOS so it won't lock up the firmwareDrashna Jaelre
2018-10-22Keyboard: Port of TMK XT USB Converter (#3619)markspanbroek
* Converter: add XT USB converter from TMK * Converter: port TMK code for USB converter to QMK * Apply requested changes after code review by @drashna - use "pragma once" instead of include guards - use LAYOUT instead of KEYMAP - allow customisation with matrix_init_user() and matrix_scan_user() - set BOOTLOADER instead of BOOTLOADER_SIZE - Add XT_ENABLE to OPT_DEFS * Remove unnecessary lines
2018-10-19stm32f1xx EEPROM emulation (#3914)Takuya Urakawa
* * Add stm32f1xx EEPROM emulation * Fix eeprom update compare bug Squashed commit of the following: commit b8f248ae08cec0cd81ecbb8854d9b39221d4d573 Author: hsgw <urkwtky@gmail.com> Date: Sat Sep 15 19:13:48 2018 +0900 fix EEPROM_update wrong compare commit d4ed4e6ea864e967a3e17f7edee4b0c3b4a25541 Author: hsgw <urkwtky@gmail.com> Date: Sat Sep 15 17:43:47 2018 +0900 eeprom fix initialization define commit b61aa7c04d70c64df3416d63e5da08b73b6053af Author: hsgw <urkwtky@gmail.com> Date: Sat Sep 15 16:33:40 2018 +0900 maybe working * Fix FLASH_KEY defines
2018-10-10Massdrop keyboards console device support for hid_listenpatrickmt
Added hid_listen USB device for arm_atsam USB protocol. Debug printing is now done through the console device (CONSOLE_ENABLE = yes) rather than the virtser device, for viewing in hid_listen. Function dpf(...) renamed to CDC_printf(...) and should now be called directly if intending to print to the virtual serial device.
2018-09-28CTRL keyboard bootloader_jump supportpatrickmt
Adds support for CTRL keyboards to enter bootloader via bootloader_jump()
2018-09-28Massdrop keyboard updates for SEND_STRING, syscalls, stdio, debug prints, ↵patrickmt
Auto Shift (#3973) * Update for SEND_STRING usage Update for SEND_STRING usage. Sending keyboard reports (kbd, nkro) now obey the minimum polling time. While attempting to send a keyboard report and waiting for a USB poll, other functions of the keyboard, including LED effects and power management, will continue to operate at their intended intervals. * Updates for send string, syscalls, stdio, debug prints, auto shift Now properly waiting for previous keys sent over USB to complete before sending new. Added heap to linker and now compiling with syscalls support. Removed custom string functions and now using stdio. dprintf now works as intended through virtser device. * CTRL and ALT keymap updates CTRL mac keymap updated ALT default and mac keymap updated ALT rules.mk added Auto Shift with default no * Code cleanup as per discussion with vomindoraan Code cleanup as per discussion with vomindoraan
2018-09-13rgblight.[ch] more configurable (#3582)Takeshi ISHII
* add temporary test code rgblight-macro-test1.[ch] * rgblight.h : mode auto numberring and auto generate mode name symbol No change in build result. * rgblight.c use RGBLIGHT_MODE_xxx symbols No change in build result. * quantum.c use RGBLIGHT_MODE_xxx symbols No change in build result. * fix build break. when RGB_MATRIX_ENABLE defined * add temporary test code rgblight-macro-test2.[ch] * modify rgblight_mode_eeprom_helper() and rgblight_sethsv_eeprom_helper() * modify rgblight_task() * configurable each effect compile on/off in config.h * update docs/feature_rgblight.md * fix conflict. docs/feature_rgblight.md * remove temporary test code rgblight-macro-test*.[ch] * fix comment typo. * remove old mode number from comment * update docs/feature_rgblight.md about effect mode * Revert "update docs/feature_rgblight.md about effect mode" This reverts commit 43890663fcc9dda1899df7a37d382fc38b1a6d6d. * some change docs/feature_rgblight.md * fix typo * docs/feature_rgblight.md update: revise mode number table
2018-09-13Keyboard: ALT keymap update and LED driver brightness mismatch fix (#3890)patrickmt
* ALT keymap update Added additional End key on layer 1 to match key cap * LED driver update addressing PR #3871 Update sync between IS31FL3733 drivers is causing varying behavior in keyboards including brightness mismatch and slight flicker at very low rgb values. Visually, disabling sync is not noticeable. Ref PR #3871 by guarnacciaa.
2018-09-05CTRL and ALT updatespatrickmt
Added support to enter bootloader from software (bootloader version must be newer than "v2.18Jun 22 2018 17:28:08" until workaround for older is created). Updated CTRL and ALT keymaps for entering bootloader with Fn+b held for >500ms. Added basic MacOS keymap for ALT. USB sleep LED indicator now turns off after 1 second. Slowed down debug LED code printing.
2018-09-05Add the ability to disable the USB startup check for Chibiosyiancar
- Added support for NO_USB_STARTUP_CHECK. This allows the keyboard do function and not get stuck in a SUSPENDED state loop in case of no USB connection. - Added support for WAIT_FOR_USB. In LUFA no keyboard has this flag enable therefor no keyboard waits for usb to be active. - Added documentation for both configuration flags as they were missing.
2018-09-01Keyboard: Rename alt67 to alt (#3824)patrickmt
Renamed keyboard alt67 to alt and adjusted necessary files where alt67 appeared. CTRL keymap fixed enum structure name. usb2422 removed stray define no longer used.
2018-08-29STM32 EEPROM Emulation (#3741)yiancar
* STM32 EEPROM Emulation - Added EEPROM emulation libaries from libmaple and Arduino_STM32. https://github.com/rogerclarkmelbourne/Arduino_STM32 and https://github.com/leaflabs/libmaple. - Renamed teensy EEPROM library and added conditional selection of library. - Remapped EEPROM memory map for 16 byte blocks (as is with STM32f3xx MCUs). - Added EEPROM initialization in main.c of Chibios. - Added EEPROM format to clear the emulated pages when EEPROM is marked as invalid. * Fixed ifdef
2018-08-29Massdrop keyboard support (#3780)patrickmt
* Massdrop SAMD51 Massdrop SAMD51 keyboards initial project upload * Removing relocated files Removing files that were relocated and not deleted from previous location * LED queue fix and cleaning Cleaned some white space or comments. Fix for LED I2C command queue. Cleaned up interrupts. Added debug function for printing numbers to scope through m15 line. * Factory programmed serial usage Ability to use factory programmed serial in hub and keyboard usb descriptors * USB serial number and bugfix Added support for factory programmed serial and usage. Incorporated bootloader's conditional compiling to align project closer. Fixed issue when USB device attempted to send before enabled. General white space and comment cleanup. * Project cleanup Cleaned up project in terms of white space, commented code, and unecessary files. NKRO keyboard is now using correct setreport although KBD was fine to use. Fixed broken linkage to __xprintf for serial debug statements. * Fix for extra keys Fixed possible USB hang on extra keys report set missing * I2C cleanup I2C cleanup and file renames necessary for master branch merge * Boot tracing and clocks cleanup Added optional boot debug trace mode through debug LED codes. General clock code cleanup. * Relocate ARM/Atmel headers Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes. * Pull request changes Pull request changes * Keymap and compile flag fix Keymap fix for momentary layer. Potential compile flag fix for Travis CI failure. * va_list include fix Fix for va_list compile failure * Include file case fixes Fixes for include files with incorrect case * ctrl and alt67 keyboard readme Added ctrl and alt67 keyboard readme files
2018-07-22Loop based vusb_transfer_keyboardRasmus Schults
2018-07-22VUSB fix report dropping if usbInterruptIsReady() returns falseRasmus Schults
2018-07-16Adds support for Planck Rev 6 (#2666)Jack Humbert
* initial files for rev 6 with encoder * music map init, dip scan added * adds ws2812 driver for arm * flesh out dip and encoder support * adds default encoder res * adds default encoder res * start muse implementation * muse working with encoder as control * flip direction * try mouse wheel again * dont break other revs * dont break other revs * conditional autio * pwm ws driver (not working) * update build includes for chibios * update ws2812 driver/config * last commit for glasser code * working example * remove rgb for now * finish up rev6 * working encoder keycodes * add warnings to planck keymaps about the LAYOUT
2018-04-15Add a custom USB driver for ARM (#2750)fredizzimo
* Copy Chibios serial_usb_driver into the chibios/protocol It's renamed to usb_driver to avoid name conflicts * Make the usb driver compile * Disable ChibiOS serial usb driver for all keyboards * Change usb_main to use QMKUSBDriver * Initialize the usb driver buffers * Add support for fixed size queues * Fix USB driver initialization * Don't transfer an empty packet for fixed size streams
2018-04-11Tabs to spaces in usb_descriptor.hfauxpark
2018-03-22Generate API docs from source code comments (#2491)skullydazed
* Generate api docs from source code * Add a bunch of doxygen comments * more doxygen comments * Add the in-progress api docs * script to generate docs from travis * Add doc generation to the travis job * make travis_docs.sh commit the work it does * make sure the docs script exits cleanly
2018-03-01Fixed dead links (#2451)Brian Choromanski
* Fixed typo of 'confid.h' to 'config.h' * Fixed broken links in docs * Fixed a lot of dead links
2018-02-12Change the CDC_NOTIFICATION_EPSIZE back to 8 from 32Fred Sundvik
2018-02-08Merge ChibiOS and LUFA descriptor support (#2362)fredizzimo
* Move lufa descriptor to protocol/usb_descriptor * Try to compile usb_descriptor on ChibiOS * Add lufa_utils for ChibiOS Lufa USB descriptors for ChibiOS * More lufa_util compatibility fixes * First compiling version of shared USB descriptor * Send the usb descriptors * Fix the CONSOLE output on ChibiOS * Add errors for unsupported interfaces * Enable support for vitual serial port USB descriptors * Implement virtual serial port for ChibiOS * Cleanup the lufa_utils Use the default lufa header files * Add raw hid support for ChibiOS This is completely untested * Enable midi compilation on ChibiOS * Move midi functionality out of lufa.c * Don't register sysex callback when not needed * ChibiOS compilation fixes * Update ChibiOS submodule * Fix the Midi USB descriptor It didn't work properly when both Midi and Virtual serial port was enabled. * Add MIDI support for ChibiOS * Fix USB descriptor strings on ChibiOS * Use serial usb driver for raw hid * Generalize the ChibiOS stream like drivers This makes the initialization much more simple and eliminates a lot of the code duplication. * Convert console output to chibios stream driver * Fixes for ChibiOS update * Update the ChibiOS contrib submodule To include the usb data toggle synchronization fixes * Fix duplicate reset enumeration on ChibiOS * Add missing include * Add number of endpoints check for ChibiOS * Enable serial USB driver on all keyboards * Add missing includes when API is enabled withot midi * Add another missing inlcude
2018-02-07Send usb wakeup through ChibiOSFred Sundvik
2018-02-07Update ChibiOS to 17.6.3Fred Sundvik
2018-02-02Update personal layouts, free up matrix_scan_user for JJ40 (#2319)Kenneth Aloysius
* Add NIU Mini keymap from Planck keymap * Remove old keymap files * Fix README, removed Planck references * Add default layout, move Planck layout to separate folder * Update README * Add my XD60 keymap * Change RShift to slash * Fix keymap: stuck on MO(1) * Move RESET to Fn+Enter * Add: RGB saturation cycle * Add numpad layer to keymap * Fix last case * Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code. * Change default to KEYMAP_MIT, not KEYMAP_OFFSET * Add custom RGB code for JJ40 * Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later. * RGB working on JJ40. * Fix: saturation increase/decrease flipped * Add new directory for my custom keymap with RGB keycodes * Swap LAlt and LGUI * Update JJ40 max power draw with measured value * Update: fun40 rules.mk to enable underglow; earlier failed Travis CI * Fix: init RGB LEDs on boot. Also added HHKB-like keymap for XD60. * Super rudimentary backlight test, init RGB LEDs on boot * Backlighting works - stays on for now * Toggling working * Now can override backlight.c functions. Problem was functions in backlight.c weren't called before due to a lack of matrix_scan_quantum() in matrix.c * Timers not working * Delete global.h * Cleanup * Compiles * Good sign: LEDs stop working again * Handle timer1 overflow * Progress: fix: forgot to init * Backlighting fully working now except breathing. * Revert keymap to original keycodes * Update XD60 keymap README * Update JJ40 keymap with backlight toggles * Breathing working just fine. * Update references * Add backlight_set() call * Cleanup code to disable backlight * Fix: does not compile * Fix: missing call to rgblight_task. * Testing with BACKLIGHT_BREATHING * Cleanup * Cleanup comments * More commenting cleanup. * Do not enable BACKLIGHT_BREATHING by default * Update XD60 keymap * Update: move matrix_scan_kb out from matrix.c to jj40.c (kb-level) * Cleanup for PR * Fix conflict in readme.md for NIU mini * Restore original power consumption figure * Fix: matrix_scan_user() now has to be defined in the keymaps * Add weak `matrix_scan_user` so it does not have to be defined in keymap * Add weak matrix_init_user()
2017-11-17Adds serial number string to USB descriptors (#1996)Jack Humbert
* add serial number string to usb descriptors * better name for serial number
2017-10-31Fix pointing device featureRob Rogers
2017-10-31fix Logical Maximum to be recognized as 255 instead of -1Takayuki Matsubara
SEE ALSO: https://github.com/qmk/qmk_firmware/issues/312
2017-10-15Added BLE support for USB-USB converter. (#1824)Benjamin Dengler
* Added BLE support to USB-USB converter * Added readme * Removed images and Makefile
2017-10-10Add option to reverse PS2 mouse axes and scrollingJesper Brix Rosenkilde
2017-09-29Clueboard 60% support (#1746)skullydazed
* initial clueboard_60 support * LED lighting support * fix the clueboard->clueboard_66 rename * Add layout support to clueboard_60 * Fix the 60_iso layout so it's actually iso * add a default keymap for AEK layout * fix clueboard_17 * Fixup the ISO layouts * Fix the `wait_ms()/wait_us()` definitions for chibios * Fix up the wait_ms/wait_us hack. Reduce stack size. * Add a missing #include "wait.h" * commit files that should have already been comitted
2017-09-06Force Raw HID interface number to 1 always (#1669)Wilba6582
2017-08-20Add compile error if too many endpoints are defined for the ATmega32U4.Joe Wasson
2017-08-15cleanup usb-usb converter codeBalz Guenat
2017-08-15some major steps toward making the usb-usb converter workBalz Guenat
2017-07-07update lufa implementationJack Humbert
2017-07-07delete old lufaJack Humbert
2017-05-29Adafruit Feather BLE / BLE Friend mouse buttons supportPriyadi Iman Nurcahyo
2017-05-26Merge pull request #1327 from Dbroqua/masterJack Humbert
Added Integration of IBM Trackpoint