summaryrefslogtreecommitdiff
path: root/tmk_core/common/keyboard.c
AgeCommit message (Collapse)Author
2021-02-05Manually run formatting job (#11797)Joel Challis
2021-02-03Fix DEBUG_MATRIX_SCAN_RATE on chibiOS when console is enabled (#11776)Drashna Jaelre
* Fix DEBUG_MATRIX_SCAN_RATE on chibiOS when console is enabled * update type in dprintf Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-28add get_matrix_scan_rate() to tmk_core/common/keyboard.c (#11489)Takeshi ISHII
2020-11-282020 November 28 Breaking Changes Update (#11053)James Young
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-18Add references for is_keyboard_left() (#10850)Drashna Jaelre
* Add references for is_keyboard_left() * Remove proto from bootmagic_lite.c
2020-08-29Hid joystick interface (#4226)a-chol
* add support for hid gamepad interface add documentation for HID joystick Add joystick_task to read analog axes values even when no key is pressed or release. update doc Update docs/feature_joystick.md Manage pin setup and read to maintain matrix scan after analog read * Incorporates patches and changes to HID reporting There are some patches provided by @a-chol incorporated on this commit, and also some changes I made to the HID Report structure. The most interesting is the one dealing with number of buttons: Linux doesn't seem to care, but Windows requires the HID structure to be byte aligned (that's in the spec). So if one declares 8/16/32... buttons they should not have any issues, but this is what happens when you have 9 buttons: ``` bits |0|1|2|3|4|5|6|7| |*|*|*|*|*|*|*|*| axis 0 (report size 8) |*|*|*|*|*|*|*|*| ... |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| axis 6 |*|*|*|*|*|*|*|*| first 8 buttons (report size 1) |*| | | | | | | | last of 9 buttons, not aligned ``` So for that I added a conditonal that will add a number of reports with size 1 to make sure it aligns to the next multiple of 8. Those reports send dummy inputs that don't do anything aside from aligning the data. Tested on Linux, Windows 10 and Street Fighter (where the joystick is recognized as direct-input) * Add save and restore of each pin used in reading joystick (AVR). Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc instead of an output pin from the MCU. Fix joystick report id Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes) Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis. Documentation fixes * Fix port addressing for joystick analog read * The other required set of changes As per the PR, the changes still holding it up. Add onekey for testing. Fix ARM builds. Fix device descriptor when either axes or buttons is zero. Add compile-time check for at least one axis or button. Move definition to try to fix conflict. PR review comments. qmk cformat * avoid float functions to compute range mapping for axis adc reading * Remove V-USB support for now. Updated docs accordingly. * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios * Fix HID joystick report sending for ChibiOS. Add one analog axis to the onekey:joystick keymap. Fix pin state save and restore during joystick analog read for STM32 MCUs. * Update tmk_core/protocol/chibios/usb_main.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add missing mcuconf.h and halconf.h to onekey:joystick keymap. Add suggested fixes from PR. * Switch saveState and restoreState signature to use pin_t type. onekey:joystick : add a second axis, virtual and programmatically animated. * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Add PR corrections * Remove halconf.h and mcuconf.h from onekey keymaps * Change ADC_PIN to A0 Co-authored-by: achol <allecooll@hotmail.com> Co-authored-by: José Júnior <jose.junior@gmail.com> Co-authored-by: a-chol <achol@notamail.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-06-03Move encoder_read to common location (#9003)Joel Challis
2020-06-03Move dip switch init to back of the init process (#9233)Drashna Jaelre
2020-05-03Provide a mechanism for split keyboards to process key press on both halves ↵Joel Challis
(#9001)
2020-05-02Move encoder_read to common locationzvecr
2020-03-10Refactor rgblight_reconfig.h (#7773)Takeshi ISHII
* Moved contents of rgblight_reconfig.h to rgblight_post_config.h. In #3582, rgblight_reconfig.h had to be newly created. Now, the build system of qmk_firmware has a post_cofig feature, so that what was done in rgblight_reconfig.h can now be realized in rgblight_post_config.h. **This commit does not change the build result.** Testing script ```shell # build on master git checkout master echo master > /tmp/master_md5.txt # RGBLIGHT_ENABLE = no make HELIX=verbose helix/rev2:default:clean make HELIX=verbose helix/rev2:default md5 helix_rev2_default.hex >> /tmp/master_md5.txt # RGBLIGHT_ENABLE = yes, with animations make HELIX=verbose helix/rev2/back:default:clean make HELIX=verbose helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/master_md5.txt # RGBLIGHT_ENABLE = yes, without animations make HELIX=verbose,no_ani helix/rev2/back:default:clean make HELIX=verbose,no_ani helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/master_md5.txt # build on refactor_rgblight_reconfig.h git checkout refactor_rgblight_reconfig.h echo refactor_rgblight_reconfig.h > /tmp/branch_md5.txt # RGBLIGHT_ENABLE = no make HELIX=verbose helix/rev2:default:clean make HELIX=verbose helix/rev2:default md5 helix_rev2_default.hex >> /tmp/branch_md5.txt # RGBLIGHT_ENABLE = yes, with animations make HELIX=verbose helix/rev2/back:default:clean make HELIX=verbose helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/branch_md5.txt # RGBLIGHT_ENABLE = yes, without animations make HELIX=verbose,no_ani helix/rev2/back:default:clean make HELIX=verbose,no_ani helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/branch_md5.txt diff -u /tmp/master_md5.txt /tmp/branch_md5.txt ``` Test result: ``` --- /tmp/master_md5.txt 2020-01-03 15:42:22.000000000 +0900 +++ /tmp/branch_md5.txt 2020-01-03 15:42:42.000000000 +0900 @@ -1,4 +1,4 @@ -master +refactor_rgblight_reconfig.h MD5 (helix_rev2_default.hex) = f360032edd522448366d471d8f4f8181 MD5 (helix_rev2_back_default.hex) = 0c663acc6cccc44476b3b969ad22a48f MD5 (helix_rev2_back_default.hex) = e66b1195ff6d38e6e22c975b8ae42fd3 ``` * Expressions that are too long are difficult to read, so wrap them. * Edit the expression again * remove `defined(RGBLIGHT_ANIMATIONS)` in `tmk_core/common/*/suspend.c`, `tmk_core/protocol/*/main.c` move contents of rgblight_reconfig.h to rgblight.h. The following changes were made to rgblight.h. ```diff +#ifdef RGBLIGHT_USE_TIMER void rgblight_task(void); void rgblight_timer_init(void); void rgblight_timer_enable(void); void rgblight_timer_disable(void); void rgblight_timer_toggle(void); +#else +#define rgblight_task() +#define rgblight_timer_init() +#define rgblight_timer_enable() +#define rgblight_timer_disable() +#define rgblight_timer_toggle() +#endif ``` The following changes were made to tmk_core/common/avr/suspend.c, tmk_core/common/chibios/suspend.c, tmk_core/protocol/chibios/main.c, tmk_core/protocol/lufa/lufa.c, tmk_core/protocol/vusb/main.c. ```diff -# ifdef RGBLIGHT_ANIMATIONS rgblight_timer_enable(); -# endif ``` ```diff -#if defined(RGBLIGHT_ANIMATIONS) && defined(RGBLIGHT_ENABLE) +#if defined(RGBLIGHT_ENABLE) rgblight_task(); #endif ``` * remove 'defined(RGBLIGHT_ANIMATIONS)' in tmk_core/common/keyboard.c Co-authored-by: Joel Challis <git@zvecr.com>
2020-01-19Move rgblight and backlight task to common location (#7733)Joel Challis
2020-01-03VIA Configurator Refactor (#7268)Wilba
* VIA Refactor * Remove old code * review changes * review changes * Fix cannonkeys/satisfaction75/prototype:via build * Add via.h to quantum.h * Move backlight init to after backlight config load * Merge branch 'master' into via_refactor_pr * Update user's rules.mk to new way of enabling VIA * Added id_switch_matrix_state * Review changes
2019-12-16[Core] Optimize matrix processing (#7621)Drashna Jaelre
Backport of tmk/tmk_keyboard@ad6059adc7039a54d1db75da783068654906a679
2019-12-11Fix FORCE_NKRO handling (#7601)Joel Challis
2019-10-17Move tmk_core/common/backlight to quantum/backlight (#6710)Joel Challis
* Move tmk_core/common/backlight to quantum/backlight * Add guards to backlight inclusion * Add guards to backlight inclusion * Update backlight guards on clueboard/60 * Use full paths to avoid vpath issues
2019-10-15 Port DEBUG_MATRIX_SCAN_RATE to core (#7029)Joel Challis
* Port DEBUG_MATRIX_SCAN_RATE to core * Remove duplicate DEBUG_MATRIX_SCAN_RATE implementations * Remove duplicate DEBUG_MATRIX_SCAN_RATE implementation from handwired/xealous * Add console logic from ergodox_ez
2019-08-30clang-format changesskullY
2019-08-20Remove superfluous JTAG disable code (#6445)fauxpark
* Remove superfluous JTAG disable code * 32A has differently named register * Accidentally some operators * 32A also has different JTAG pins * Wrap disable_jtag() in an ifndef * Document this new define * Rename the define, it conflicts with a LUFA thing Also, move the ifndef wrapping to the call in keyboard_setup()
2019-05-06[Keyboard] Sol keyboard conversion to split common (#5773)XScorpion2
* Split common conversion * Updated serial and encoder pins * Fixing default folder until r2 * Fixing oled driver on slave split common * Fixing keymap compile errors * Fixing oled inactivity timer on slave split common * Hoisted oled driver task, init, & activity to keyboard.c * Update keyboards/sol/config.h Co-Authored-By: XScorpion2 <rcalt2vt@gmail.com> * Remove TAPPING_FORCE_HOLD
2019-02-21Velocikey: Match RGB animation speed to typing speed (#3754)Chris Lewis
* Draft commit of typing speed RGB control * More information in the readme * Support all RGB animation modes (Fixes #1) * Added support for all RGB light modes to use typing speed Except christmas lights because that is seizure-inducing at high speeds! * Introduced a value range specific to each RGB mode Because some modes are a little too much when running at full speed! * Update readme.md * Update readme.md * Re-arrange typing_speed definitions (Fixes #5) (#6) * Re-arrange variable definitions to avoid including quantum.h from rgblight.c * Fix a compilation error when trying to run make test:all * Tweaks to the typing speed decay rate * Renamed to momentum; moved implementation into dedicated files * Groundwork for toggling momentum on/off (currently always on) * Add EEPROM toggle for momentum-matching * Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic * Move momentum decay task out of rgblight_task() * Fix missing momentum.h in lufa.c * Experimental LED support (untested) * Draft commit of typing speed RGB control * More information in the readme * Support all RGB animation modes (Fixes #1) * Added support for all RGB light modes to use typing speed Except christmas lights because that is seizure-inducing at high speeds! * Introduced a value range specific to each RGB mode Because some modes are a little too much when running at full speed! * Update readme.md * Update readme.md * Re-arrange typing_speed definitions (Fixes #5) (#6) * Re-arrange variable definitions to avoid including quantum.h from rgblight.c * Fix a compilation error when trying to run make test:all * Tweaks to the typing speed decay rate * Renamed to momentum; moved implementation into dedicated files * Groundwork for toggling momentum on/off (currently always on) * Add EEPROM toggle for momentum-matching * Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic * Move momentum decay task out of rgblight_task() * Fix missing momentum.h in lufa.c * Added documentation * Renamed feature to velocikey * Reverted readme to original state * Correct the readme title * Updated feature name in the docs * Update EECONFIG name * Add compile-time toggles for velocikey * Update feature documentation * Revert "Merge branch 'led-support' into master" This reverts commit e123ff5febf61639b9a9020748e1c2e2313460ff, reversing changes made to df111a55b9d4929182e16108b1c0ead15b16df97. * Move velocikey EECONFIG definition to depend on VELOCIKEY_ENABLE * Rename decay_task function to decelerate * Apply suggestions from code review Co-Authored-By: chrislewisdev <chris@chrislewisdev.com> * Re-order eeconfig definitions * Apply coding conventions * Apply #ifdef check in lufa.c * Refactored interval time checks into one functionc * Small rename * Fix unused function error for layouts not using all rgb effects * Only update EEPROM if Velocikey is enabled * Incorporate code review feedback * Small adjustment to top-end decay rate * Add Velocikey documentation to table of contents * Bring tetris:default keymap size down by disabling audio
2019-02-14Debounce refactor / API (#3720)Drashna Jaelre
* Added xeal60 via clone of lets split * Delete removed other keymaps * Basic keymap (no FN). Compiles. * Removed NP_STAR and NP_SLSH. * Removed "debounce_algo = manual" in all keyboards with CUSTOM_MATRIX = yes. * Changed order of rules in TMK. Documented feature. * Fixed missing whitespace in debounce documentation Table wasn't working due to missing newline. * Added bold in a few areas. * DO NOT USE - Removed debounce from TMK. * Remove accidental xeal60 commit * DO NOT USE - debounce successfully compiled. * DO NOT USE Revert back to original API to support split_keyboards. * Working eager_pk * Whitespace cleanup. * Restored debounce.h since there wasnt any real change. * Moved debouncing_time variable to inside #if debounce * Removed check for custom_matrix. We can safely include the debounce file for compilation when custom_matrix is used. * Removed #include "matrix.h" from debounce.h * Bug fix - was using MATRIX_ROWS instead of num_rows * Fixed compilation error with debounce_sym_g * Renamed DEBOUNCE_ALGO to DEBOUNCE_TYPE * Malloc array in debounce_eager_pk, since split keyboards only use MATRIX_ROWS/2. * Fix compile error in debounce_eager_pk * Stricter, leaner DEBOUNCE_TYPE section in common_features.mk. Cleanup debounce_type.mk
2019-02-14Add kb and user level keyboard initialization functions (#3113)Drashna Jaelre
* Add suspend functions * Disable RGB code if it's disabled * Add keyboard_init functions * Change where references so it will compile * Wrong command chained in wake up kb function * Fix non-feature file changes * Add documentation * Re-add matrix init docs * add rgblight code to example * Remove suspend code * Clean up docs * Fix docs * Fix suspend code * more doc fixes * change function to startup_* rather than keyboard_init_ * fix spelling error * fix up docs to finish removing keyboard_init * Use Pre and Post init functions * Update Documenation * Remove changes to my keymap and userspace code * Cleanup * Revert changes to extra files * Forgot a semicolon * Make sure all protocols call keyboard_setup * Cleanup functions * Unset startup_user * Remove changes from division keyboard * Readd startup_user function * Remove all to startup_user * Update docs/custom_quantum_functions.md Co-Authored-By: drashna <drashna@live.com> * Update docs/custom_quantum_functions.md Co-Authored-By: drashna <drashna@live.com> * Add suggestion line * Rebase fixes * Update documentation to be more useful/accurate * Cleanup of documentation * Fix spacing inconsistency * Revert unexpected change to keymap
2019-01-26Whitespace cleanup.alex-ong
2019-01-26DO NOT USE - Removed debounce from TMK.alex-ong
2019-01-04Merge branch 'master' into debounce_refactorAlex Ong
# Conflicts: # tmk_core/common/keyboard.c
2018-12-04adding Hadron v3 keyboard, QWIIC devices support, haptic feedback support ↵ishtob
(#4462) * add initial support for hadron ver3 * add initial support for hadron ver3 * pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display * initial work on OLED using qwiic driver * early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality * moved oled defines to config.h and added ifndef to micro_oled driver * WORKING :D - note, still work in progress to get the start location correct on the 128x32 display. * added equation to automatically calculate display offset based on screen width * adding time-out timer to oled display * changed read lock staus via read_led_state * lock indications fixes * Added scroll lock indication to oled * add support for DRV2605 haptic driver * Improve readabiity of DRV2605 driver. -added typedef for waveform library -added unions for registers * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Fixes for PR * PR fixes * fix old persistent layer function to use new set_single_persistent_default_layer * fix issues with changing makefile defines that broken per-key haptic pulse * Comment fixes * Add definable parameter and auto-calibration based on motor choice
2018-11-02Move disable JTAG code from `keyboard_init` to `keyboard_setup`Danny Nguyen
This way all split keyboards are using that code instead of just those using split_common with the fix
2018-08-29Removed "debounce_algo = manual" in all keyboards with CUSTOM_MATRIX = yes.Alex Ong
2018-07-15Integrating Peter Fleury's HD44780 LCD library (#3209)Max Audron
* integrated Peter Fleury's LCD library for HD44780 LCDs * fixed typo * cleanup finished * add documentation * added HD44780 documentation * removed keyboard from .gitmodules * resolved merge conflict * removed edit of kira75s rules.mk made by merge * moved hd44780 to drivers/avr * Added licence info to hd44780 files * Added link to hd44780 docs.
2018-06-28Disable JTAG in keyboard initDrashna Jaelre
So that all boards, present and future will have JTAG disabled, even if using a custom matrix
2018-03-22Generate API docs from source code comments (#2491)skullydazed
* Generate api docs from source code * Add a bunch of doxygen comments * more doxygen comments * Add the in-progress api docs * script to generate docs from travis * Add doc generation to the travis job * make travis_docs.sh commit the work it does * make sure the docs script exits cleanly
2018-02-08Merge ChibiOS and LUFA descriptor support (#2362)fredizzimo
* Move lufa descriptor to protocol/usb_descriptor * Try to compile usb_descriptor on ChibiOS * Add lufa_utils for ChibiOS Lufa USB descriptors for ChibiOS * More lufa_util compatibility fixes * First compiling version of shared USB descriptor * Send the usb descriptors * Fix the CONSOLE output on ChibiOS * Add errors for unsupported interfaces * Enable support for vitual serial port USB descriptors * Implement virtual serial port for ChibiOS * Cleanup the lufa_utils Use the default lufa header files * Add raw hid support for ChibiOS This is completely untested * Enable midi compilation on ChibiOS * Move midi functionality out of lufa.c * Don't register sysex callback when not needed * ChibiOS compilation fixes * Update ChibiOS submodule * Fix the Midi USB descriptor It didn't work properly when both Midi and Virtual serial port was enabled. * Add MIDI support for ChibiOS * Fix USB descriptor strings on ChibiOS * Use serial usb driver for raw hid * Generalize the ChibiOS stream like drivers This makes the initialization much more simple and eliminates a lot of the code duplication. * Convert console output to chibios stream driver * Fixes for ChibiOS update * Update the ChibiOS contrib submodule To include the usb data toggle synchronization fixes * Fix duplicate reset enumeration on ChibiOS * Add missing include * Add number of endpoints check for ChibiOS * Enable serial USB driver on all keyboards * Add missing includes when API is enabled withot midi * Add another missing inlcude
2017-11-22I found a typo!Colin T.A. Gray
2017-11-21Allow multiple process_record() calls per scanSeebs
This is particularly relevant for, e.g., the ergodox EZ and other keyboards with slow scan rates. Without changing the API or behavior of individual process_record() calls, we allow a configuration flag to make multiple calls in a single scan. This will probably have miniscule effects on non-steno users, and it's not enabled by default for any keyboards. Added note about it to ergodox README. Signed-off-by: seebs <seebs@seebs.net>
2017-10-06Generic Pointing Device (#1767)Snipeye
2017-09-30Don't process keycodes on the slaveFred Sundvik
2017-07-27Add support for GeminiPR steno protocol.Joe Wasson
This protocol breaks out "duplicate" keys into their own entry in the packet so that more complicated logic can be done on the software side, including support for additional languages and alternative theories.
2017-05-14added comments and made function name clearerJeremiah
2017-05-14whoopsJeremiah
2017-05-14faster, less bits :)Jeremiah
2017-05-13faster and less bits... againJeremiah
2017-05-13faster and less bitsJeremiah
2017-05-13should be using matrix_row_tJeremiah
2017-05-13a bit smallerJeremiah
2017-05-13a bit smallerJeremiah
2017-05-13improvementsJeremiah
2017-05-13anti-ghost improvement for older keyboards with empty spots in matrixJeremiah
2017-02-13Implement faux-clicky featurePriyadi Iman Nurcahyo
2017-02-05Minor cleanupNikolaus Wittenstein