summaryrefslogtreecommitdiff
path: root/tmk_core/common/chibios
AgeCommit message (Collapse)Author
2021-11-02Fix build failures caused by #12947. (#15019)Nick Brassel
* Fix build failures caused by #12947. Unknown if this actually works. * qmk format-c
2021-11-01core: make the full 4096 bytes of EEPROM work on Teensy 3.6 (#12947)Michael Stapelberg
This commit updates QMK’s copy of the the teensy3 Arduino core code with the necessary changes to make the Teensy 3.6 work. Aside from different values for the partitioning, HSRUN mode must be left temporarily while using the EEPROM. fixes https://github.com/kinx-project/kint/issues/8 related to https://github.com/kinx-project/kint/issues/10
2021-11-01Manually format develop (#15003)Joel Challis
2021-10-18[Core] Add support for RISC-V builds and GD32VF103 MCU (#12508)Stefan Kerkmann
* Add support for RISC-V builds and GD32VF103 MCU * Add toolchain selection in chibios.mk based on the mcu selected in mcu_selection.mk * Reorder and added comments to chibios.mk to have a streamlined makefile * Add GD32VF103 mcu to possible targets for QMK. * Add STM32 compatibility for GD32VF103 MCU, this is hacky but more efficent then rewriting every driver. * Add GigaDevice DFU bootloader as flash target, please note that dfu-util of at least version 0.10 is needed. * Add analog driver compatibility * Add apa102 bitbang driver compatibility * Add ws2812 bitbang driver compatibility * Add eeprom in flash emulation compatibility * Allow faster re-builds with ccache * Add SiPeed Longan Nano to platform files * Add SiPeed Longan Nano Onekeys * Make quine compatible with other bootloaders * Support builds with picolibc * Add risc-v toolchain to arch and debian/ubuntu scripts
2021-10-18Add HT32 support to core (#14388)bwisn
* tmk_core: temporary fix to allow HT32 based keyboards to work without patched ChibiOS-contrib (AnnePro2) * HT32: add spi support Add persistent led support with eeprom (#9) * adding HT32 support to chibios SPI master driver update spi driver, fix bad merging with master * HT32: fix formatting HT32: Fix formatting: tmk_core/protocol/chibios/usb_main.c Co-authored-by: Drashna Jaelre <drashna@live.com> * HT32: Apply suggestions from fauxpark's code review Co-authored-by: Ryan <fauxpark@gmail.com> * HT32: update spi driver * ht32: apply code review suggestions, remove old workaround Co-authored-by: tech2077 <tech2077@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2021-10-16Further tidy up of STM32 eeprom emulation (#14591)Joel Challis
2021-10-08Enable eeprom with F401xE ld (#14752)Dasky
2021-09-25Initial pass of F405 support (#14584)Joel Challis
* Initial pass of F405 support * remove some conf files * docs * clang
2021-09-16Make ChibiOS PAL interactions less STM32 specific - Round 2 (#14456)Joel Challis
2021-09-15Add Support for USB programmable buttons (#12950)Thomas Weißschuh
2021-09-15Implement F4 eeprom (#14195)Joel Challis
2021-09-15Migrate STM32_EEPROM_ENABLE to use EEPROM_DRIVER (#14433)Joel Challis
2021-09-15Refactor use of _STM32_ defines (#14439)Joel Challis
2021-09-14Refactor use of STM32_SYSCLK (#14430)Joel Challis
* Refactor use of STM32_SYSCLK * clang
2021-09-05Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-09-05Fix eeprom for Durgod boards (#14324)Joel Challis
2021-09-05Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-09-05Tidy up defines within STM EEPROM emulation (#14275)Joel Challis
* Tidy up defines within stm eeprom emulation * Fix tests * Resolve todo * Still use page notion in clear * Remove more f4 refs
2021-08-30Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-08-31cherry pick tidy up (#14244)Joel Challis
2021-08-30Move feature suspend logic out of platform specific code (#14210)Drashna Jaelre
2021-08-24add wait_cpuclock() macro for AVR and CPU_CLOCK macro (#12755)Takeshi ISHII
2021-08-23eeprom_stm32: implement high density wear leveling (#12567)Donald Kjer
* eeprom_stm32: implement wear leveling Update EECONFIG_MAGIC_NUMBER eeprom_stm32: check emulated eeprom size is large enough * eeprom_stm32: Increasing simulated EEPROM density on stm32 * Adding utility script to decode emulated eeprom * Adding unit tests * Applying qmk cformat changes * cleaned up flash mocking * Fix for stm32eeprom_parser.py checking via signature with wrong base * Fix for nk65 keyboard Co-authored-by: Ilya Zhuravlev <whatever@xyz.is> Co-authored-by: zvecr <git@zvecr.com>
2021-08-20Support using a timer for wait_us() on ChibiOS-based boards (#12211)Simon Arlott
* Support using a timer for wait_us() on ChibiOS-based boards (#12198) There are spare GPT timers that can be used to get a more accurate wait_ms() time. This is required for the matrix scan unselect delay (30µs) to be shorter than the system tick rate of 100µs. This is limited to the maximum GPT duration of 65535 so values above that will automatically use the previous implementation based on the system tick. Using a specific timer means it can't be shared by another thread at the same time so when wait_us() is called from anything other than the main thread it will use the system tick implementation too. * Update tmk_core/common/chibios/wait.c * Update tmk_core/common/chibios/wait.c Co-authored-by: Joel Challis <git@zvecr.com>
2021-08-18Begin to carve out platform/protocol API - Single main loop (#13843)Joel Challis
* Begin to carve out platform/protocol API * Fix up after rebase
2021-08-06Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-08-06Avoid name conflicts with usb_hid Arduino code (#13870)Joel Challis
* Avoid name conflicts with usb_hid Arduino code * Fix tests
2021-08-02Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-08-02flash_stm32: don't unlock flash if already unlocked (#13841)xyzz
On stm32f4 after reboot from DFU it was observed that the flash is already unlocked. In that case, attempting to unlock it again causes a data abort.
2021-07-25Merge remote-tracking branch 'upstream/master' into developNick Brassel
2021-07-24Refactor some platform dependent logic (#13675)Joel Challis
2021-07-06core: chibios: bootloader: use integer pointers as volatile (#13450)Thomas Weißschuh
This prevents gcc from incorrectly trying to validate array bounds. ``` tmk_core/common/chibios/bootloader.c: error: '__builtin_memcpy' offset [0, 21] is out of the bounds [0, 0] [-Werror=array-bounds] 107 | __builtin_memcpy((void *) VBAT, (const void *)sys_reset_to_loader_magic, sizeof(sys_reset_to_loader_magic)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ``` See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c16 Fixes #12925
2021-06-26Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-06-26Allow configuration of USB_VBUS_PIN on chibios (#13342)Joel Challis
2021-06-15core: make RESET key work with Teensy 4.x (#13076)Michael Stapelberg
related to https://github.com/kinx-project/kint/issues/5
2021-06-09Avoid 8-bit timer overflows in debounce algorithms (#12240)Simon Arlott
* Add fast_timer_t that is 16-bit or 32-bit based on architecture A 16-bit timer will overflow sooner but be faster to compare on AVR. * Avoid 8-bit timer overflows in debounce algorithms Count down remaining elapsed time instead of trying to do 8-bit timer comparisons. Add a "none" implementation that is automatically used if DEBOUNCE is 0 otherwise it will break the _pk/_pr count down. * Avoid unnecessary polling of the entire matrix in sym_eager_pk The matrix only needs to be updated when a debounce timer expires. * Avoid unnecessary polling of the entire matrix in sym_eager_pr The matrix only needs to be updated when a debounce timer expires. The use of the "needed_update" variable is trying to do what "matrix_need_update" was added to fix but didn't work because it only applied when all keys finished debouncing. * Fix sym_defer_g timing inconsistency compared to other debounce algorithms DEBOUNCE=5 should process the key after 5ms, not 6ms * Add debounce tests
2021-06-07Add readPort() and some API to 'tmk_core/common/*/gpio.h' (#12754)Takeshi ISHII
* add readPort() and some API to 'tmk_core/common/*/gpio.h' The following macros have been added to gpio.h. * readPort(port) * setPortBitInput(port, bit) * setPortBitInputHigh(port, bit) * setPortBitOutput(port, bit) * writePortBitLow(port, bit) * writePortBitHigh(port, bit) * add data type 'port_data_t' into gpio.h * rename qmk_pin to pin
2021-05-292021 May 29 Breaking Changes Update (#13034)James Young
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-29run: qmk cformat --core-onlyJames Young
2021-05-13Add missing LED Matrix suspend code to suspend.c (#12878)Drashna Jaelre
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-04-29[CI] Format code according to conventions (#12731)github-actions[bot]
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-04-29Change RGB/LED Matrix to use a simple define for USB suspend (#12697)Drashna Jaelre
2021-04-25Format code according to conventions (#12682)github-actions[bot]
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-04-25Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) ↵Nick Brassel
(#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h
2021-04-20Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-04-20Fix for gcc10 teensy_lc eeprom build warning (#12587)Joel Challis
2021-04-13LED Matrix: suspend code (#12509)Ryan
2021-03-30core: add pin_defs for MK66F18 (#12419)Michael Stapelberg
This is in preparation for https://github.com/qmk/qmk_firmware/pull/10171
2021-03-17core: add support for MK66F18 (Teensy 3.6) micro controller (#12258)Michael Stapelberg
This is in preparation for https://github.com/qmk/qmk_firmware/pull/10171
2021-03-10Move gpio wait logic to wait.h (#12067)Joel Challis