summaryrefslogtreecommitdiff
path: root/tmk_core/avr.mk
AgeCommit message (Collapse)Author
2021-08-17Relocate platform specific drivers (#13894)Joel Challis
* Relocate platform specific drivers * Move stm eeprom * Tidy up slightly
2021-08-15Move all the flash logic from tmk_core (#13927)Joel Challis
2021-08-10Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-08-10Add padding to LUFA-MS .BIN files (#13922)Ryan
2021-07-24Update LUFA (18-07-2021) and add QMK-HID Bootloader support (#13588)Drashna Jaelre
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-07-03Merge remote-tracking branch 'upstream/master' into developfauxpark
2021-07-03Add "Ctrl+C to cancel" to "waiting for bootloader" messages (#13424)Ryan
2021-06-16Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-06-16Make atmel-dfu and chibios-dfu flashing behave more like caterina flashing. ↵Purdea Andrei
(#12552) This commit makes atmel-dfu and chibios-dfu bootloaders retry to detect the bootloader every 0,5 seconds (now configurable via the BOOTLOADER_RETRY_TIME makefile variable), and a period is printed after every try. This is a much more pleasant behaviour than the 5s retry timeout.
2021-06-06Fix firmware size check with avr-libc 1:2.0.0+Atmel3.6.2-1.1 (Debian ↵Sergey Vlasov
bullseye) (#12951) Debian bullseye (testing at the moment, but seems close to release) has avr-libc 1:2.0.0+Atmel3.6.2-1.1 with some changes taken from the Atmel-distributed toolchain. In particular, the <avr/io.h> header for ATmega32A (avr/iom32a.h) now defines the FLASHEND constant as `0x7FFFU`, and that `U` suffix breaks the firmware size check code, because the shell arithmetic expansion that is used to calculate `MAX_SIZE` does not support those C-specific suffixes. As a workaround, add `-D__ASSEMBLER__` to the C preprocessor invocation that is used to expand those macros; in this case avr/iom32a.h defines `FLASHEND` without the `U` suffix, and everything works as it did before with older avr-libc versions. The exact same code is present in two places; they are both changed, even though the code in `tmk_core/avr.mk` is actually never used for ATmega32A (and the header for ATmega32U4 does not add that `U` suffix to `FLASHEND` for some reason).
2021-05-292021 May 29 Breaking Changes Update (#13034)James Young
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-10Fix another bin/qmk reference (#12856)Sergey Vlasov
2021-05-06Fix qmk flash on FreeBSD (#12085)Mateusz Piotrowski
When the USB device is connected, FreeBSD creates not one, but three device nodes in /dev, e.g.: /dev/ttyU0, /dev/ttyU0.init, and /dev/ttyU0.lock. As a result, this leads to the USB variable containing 3 paths (and therefore, whitespace) and messages like this one: Device /dev/ttyU0 /dev/ttyU0.init /dev/ttyU0.lock has appeared; assuming it is the controller. This changes fixes the use of the -z flag of "[" (see test(1)). Also, it removes undesired paths from the USB variable, leaving only one path there (i.e., "/dev/ttyU0").
2021-04-03Add WSL specific logic for avrdude device detection (#12392)Joel Challis
2021-03-07Require `BOOTLOADER = qmk-dfu` for `:bootloader` target (#12136)Ryan
2021-02-28Migrate make_dfu_header to CLI (#12061)Joel Challis
* Migrate make_dfu_header to CLI * lint fixes * Update lib/python/qmk/cli/generate/dfu_header.py Co-authored-by: Ryan <fauxpark@gmail.com> * Rename object Co-authored-by: Ryan <fauxpark@gmail.com>
2020-09-13[fix] dfu-programmer <0.7 doesn't support --force flag (#10292)Frans de Jonge
Fixes <https://github.com/qmk/qmk_firmware/issues/10286>.
2020-09-10Use the force when flashing with dfu-programmer (#10070)Ryan
2020-05-15CLI: Tune doctor's udev rule checking to match #8750Erovia
2020-05-10Improve security of avrdude by eliminating the use of well-known names. (#9026)Zach White
* Improve security by eliminating the use of well-known names. * Add an additional $ so the shell expands $TMP1 and $TMP2 Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com>
2020-04-17Remove Atmel FLIP from install scripts and documentation (#8822)Ryan
2020-04-01Migrate :program logic to :flash (#8631)Joel Challis
2020-03-17Remove qmk archive generation (#8462)Joel Challis
2020-03-07Fix up Arm builds with nix-shell. (#8312)Nick Brassel
2020-01-31Fix misunderstanding of CPPFLAGS and CXXFLAGS.Nick Brassel
2019-12-07Set proper AVR part for USBasp avrdude flashing (#7552)fauxpark
* Set proper AVR part for USBasp avrdude flashing * Remove `PROGRAM_CMD` stuff from rules.mk as they should not be needed anymore * Missed the Plaid readme * Remove PROGRAM_CMD from Mysterium
2019-11-24Remove CR when computing BOOTLOADER_SIZE. (#7453)a_p_u_r_o
2019-09-08Actually use correct bootloader not found message (#6695)Drashna Jaelre
2019-09-08Move Bootloader not found message to global variable (#6688)Drashna Jaelre
* Move Bootloader not found message to global variable * Apply suggestions from code review Co-Authored-By: fauxpark <fauxpark@gmail.com>
2019-08-26Fix Typo in :flash target for missing bootloader (#6615)Drashna Jaelre
2019-08-24Add 'bootloadHID' flash target (#5587)Joel Challis
* Add 'bootloadHID' flash target * Prep for flash target * Add :flash support * Align bootloader wait messages Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update template to suggest use of :flash
2019-08-20Add a universal flash command for cli (#6224)Drashna Jaelre
* Add universal flash command * Add bootloader info to I:C boards * Add support for ATSAM * Add messages for flash target * Message cleanup * Add USB ASP Flashing target * Make usbasp target more universal * Add phoney target for usbasp * Clarify error message when bootloader isn't matched
2019-07-16Expand bootloader target to support most AVR boards (#6255)Drashna Jaelre
* Update the :bootloader target to pass along correct hardware info * Update make scripts to properly grab the settings (a big thanks to @yanfali) * Remove LUFA debug warnings
2019-07-15Usbasploader bootloader option addition (#6304)yiancar
* Added USBasp bootloader option for USBasploader * author comment * ifdef fix :) * Add usbasp target * Update docs/flashing.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update docs/flashing.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update docs/flashing.md Co-Authored-By: fauxpark <fauxpark@gmail.com>
2019-04-22fix LIB_SRC and QUANTUM_LIB_SRC for ARM (#5623)Takeshi ISHII
* fix LIB_SRC and QUANTUM_LIB_SRC for ARM(chibios) * remove ARFLAGS * tmk_core/arm_atsam.mk:AR: remove 'rcs'
2019-03-18correct typo in eeprom split target for dfu (#5445)Rob Rogers
2019-03-15Add avrdude split EE_HANDS flash commands (#5414)Danny
* Add EEPROM avrdude flashing commands for setting handedness * Update docs with info on flashing EEPROM handedness files with commands
2019-03-13Sleep until USB port becomes writable before running avrdude (#5393)Michael F. Lamb
* sleep until usb port becomes writable before running avrdude * only wait for a writable USB port when not on MSYS using MINGW or MSYS: sleep for one second, as before. otherwise: wait for the port to become writable. * typo * typo
2019-02-18Fixed grep issue in bootloader build target (#3848)Jumail Mundekkat
* Changed use of '\s' in grep to '[ \t]' for portability * Pushed DFU Keyboard.h into a shell script * Fixed execution permissions on make_dfu_header,sh
2018-12-14Add left/right EEPROM flashing for DFU (#4560)Drashna Jaelre
2018-09-27add 'mavrdude' target into tmk_core/avr.mk (#3986)Takeshi ISHII
* add 'mavrdude' target into tmk_core/avr.mk I made it a little convenient when writing the same binary to multiple Pro Micro. * rename target name 'mavrdude' to 'avrdude-loop' * modify docs/flashing.md about avrdude-loop * mdify docs/flashing.md again * modifi docs/flashing.md 3rd
2018-08-29Fixed bootloader targetJumail
Fixed matching grep matches (for PRODUCT in particular) Fixed " Bootloader" concatenation for WSL (windows line-endings)
2018-06-06Bootloader make issue (#2975)yiancar
* Added Modular keyboards L,R and NUM Created code modules for the 3 modules of the modular keyboard. Original idea by MechboardsUK. Uses i2c implementation similar to lets split * Remove modular from master This is to fix incorrect branching * fixed bootloader makefile - Echo -e does not behave coorectly on mac - Replaced with equivilant printf statements * quick typo fix
2018-03-29Properly always copy firmwareU-LANDSRAAD\drashna
This finishes fixing #2314, which mostly copies the firmware when compiling. However, it misses `:teensy`, `:avrdude` and most importantly, `:production`
2018-03-26Better non-Linux support (#2524)dankm
* grep -> $(GREP) Some UNIXy systems (FreeBSD for example) don't use GNU grep by default. Allow the user to specify which grep implementation to use so that GNU grep can be specified. * Allow using versioned avr-gcc command Don't hardcode "avr-gcc", and allow strings such as "avr-gcc8", or "avr-gcc-7.3.0" to match checks for "avr-gcc".
2018-03-16fix generate Keyboard.huplus
2018-02-28Remap msys2 usb, fix USB port detection (#2301)Danny
* Add AVRDUDE to MSYS2 setup * Remap detected USB port in MSYS2 to COM port
2018-02-08Switch from echo to printf for output without newlinesDanny Nguyen
2018-02-08Only search through newly detected devices and discard ones that disappearedDanny Nguyen
2018-01-28Always copy the firmware file to the root qmk_firmware directory (#2314)skullydazed
* Always copy the firmware file to the root qmk_firmware directory * remove circular dependency