summaryrefslogtreecommitdiff
path: root/quantum/split_common
AgeCommit message (Collapse)Author
2023-10-22Modify split config is_keyboard_master/left checks. (#21875)Dasky
* rework split configuration * Apply suggestions from code review Co-authored-by: Joel Challis <git@zvecr.com> * lint * missed return --------- Co-authored-by: Joel Challis <git@zvecr.com>
2023-07-31Remove old OLED API code (#21651)Ryan
2023-07-22Revert "[Bug] Fix compilation error when Split Watchdog enabled" (#21572)Ryan
2023-07-20[Bug] Fix compilation error when Split Watchdog enabled (#21543)Drashna Jaelre
2023-07-21haptic: naming cleanups (#21551)Ryan
2023-07-16quantum: remove direct `quantum.h` includes (#21507)Ryan
2023-05-31Fix backlight sync on suspend_power_down for split keyboards (#21079)Evgenii Vilkov
2023-04-12Fix preprocessor condition for SPLIT_HAPTIC_ENABLE (#20411)Giuseppe Rota
2023-04-04Make "detected_host_os()" available on the SLAVE side of the split keyboard ↵ngs-ch
(#19854) Co-authored-by: ngs.ch <ngs.ch> Co-authored-by: Drashna Jaelre <drashna@drashna.net>
2023-03-30Add last activity functions for pointing device (#20079)Drashna Jaelre
2023-03-21Sync activity timestamps between sides. (#20192)Nick Brassel
Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
2023-02-12Remove `config.h` include from quantum files (#19817)jack
2023-01-01Add Split support for Haptic feedback (#19203)Drashna Jaelre
2022-10-06Implement split comms watchdog (#18599)Dasky
2022-10-05[Bug] Fix ST7565 handler deadlock (#18609)Stefan Kerkmann
2022-10-05[Core] rewrite locking in split transaction handlers (#18417)Stefan Kerkmann
2022-09-16Move fake EE_HANDS (#18352)Dasky
2022-08-06[Core] guard RPC invocation by checking RPC info against crc checksum (#17840)Stefan Kerkmann
2022-06-20Init eeconfig before reading handedness (#17256)Dasky
2022-06-06Move SPLIT_HAND_PIN setup to split_pre_init (#17271)Dasky
* Move SPLIT_HAND_PIN setup to split_pre_init * doppelganger should use old behaviour * Add comment for future Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com>
2022-06-01Allow larger SPLIT_USB_TIMEOUT with default SPLIT_USB_TIMEOUT_POLL (#17272)Dasky
* Switch SPLIT_USB_DETECT loop to uint16_t * Add assertion
2022-04-19[Core] Use a mutex guard for split shared memory (#16647)Stefan Kerkmann
2022-03-08Asymmetric encoders, encoder tests. (#16068)Nick Brassel
2022-02-12Format code according to conventions (#16322)QMK Bot
2022-01-26Deprecate split transactions status field (#16023)Stefan Kerkmann
2022-01-26Enable a default task throttle for split pointing. (#15925)Dasky
2021-12-31Format code according to conventions (#15693)QMK Bot
2021-12-31Fix split pointing for analog joystick (#15691)Dasky
Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-12-28[Core] Fix bug and code regression for Split Common (#15603)Drashna Jaelre
2021-12-27[Core] Split support for pointing devices. (#15304)Dasky
* Draft implementation * formatting * fix combined buttons * remove pimoroni throttle * sync pointing on a throttle loop with checksum * no longer used * doh Co-authored-by: Drashna Jaelre <drashna@live.com> * switch pimoroni to a cpi equivalent * add cpi support * allow user modification of seperate mouse reports * a little tidy up * add *_RIGHT defines. * docs * doxygen comments * basic changelog * clean up pimoroni * small doc fixes * Update docs/feature_pointing_device.md Co-authored-by: Drashna Jaelre <drashna@live.com> * performance tweak if side has usb * Don't run init funtions on wrong side * renamed some variables for consistency * fix pimoroni typos * Clamp instead of OR * Promote combined values to uint16_t * Update pointing_device.c Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-11-27[Bug] Revert Assymmetrical Split Encoder support (#12090) (#15311)Drashna Jaelre
* Revert "fix broken macro in transport.h (#15239)" This reverts commit 06f18e22d9aff0afa4dce101a6a1b2cae5511365. * Revert "Rework encoders to enable asymmetric split keyboards (#12090)" This reverts commit 32215d5bff52262542a2f8d2a221b0303f02c019.
2021-11-20fix broken macro in transport.h (#15239)Balz Guenat
2021-11-20Rework encoders to enable asymmetric split keyboards (#12090)Balz Guenat
Co-authored-by: Balz Guenat <balz.guenat@siemens.com> Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-11-01Manually format develop (#15003)Joel Challis
2021-08-24[Core] Refactor OLED to allow easy addition of other types (#13454)Xelus22
* add docs * core changes * update keyboards to new OLED * updated users to new OLED * update layouts to new OLED * fixup docs * drashna's suggestion * fix up docs * new keyboards with oled * core split changes * remaining keyboard files * Fix The Helix keyboards oled options * reflect develop Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
2021-08-22Make solo half of split keyboards (more) usable. (#13523)Joakim Tufvegren
* Make solo half of split keyboards (more) usable. Using only one half of a split keyboard (that's using the split_common framework to communicate) is not a great experience, since several read timeouts per scan cycle cause an unusably slow scan rate. This change blocks all split communication attempts for 500 ms (configurable) after an error occurs, causing the scan rate to become at least _more_ usable, but might need some tweaking to work fully on most keyboards. One read timeout still needs to occur after the 500 ms has passed, and if that timeout isn't low enough, some scan cycles may still be too slow. * Fix lint complaint. * Require 25 consecutive comm errors to see comms as disconnected. The number of max errors can be overridden by defining `SPLIT_MAX_CONNECTION_ERRORS`. * Add comments to new defines, and ability to disable disconnection check. Also increase `SPLIT_MAX_CONNECTION_ERRORS` to 40, since it's divisible by most relevant numbers for the description. * Make lint happy ...again * Only update `connection_check_timer` when needed. * Add new defines to split keyboard documentation. * Move connection timeout logic to transport.c, add `is_transport_connected`. * Use split_common disconnection logic in matrix.c. Instead of doing more or less the same thing twice. * Move disconnection logic to `transport_master`. Is a cleaner implementation, and causes the scan rate while disconnected to increase instead of decrease. * Lint fixes. * Lower default `SERIAL_USART_TIMEOUT` to 20 ms. The read timeout must be low enough to not cause exessively long scan cycles when using a solo split half. 10 ms was determined from testing to work fine even with the slowest defined baudrate of 19200 (5 ms was too low for that case), so 20 ms should be fine for most cases. * Remove `SERIAL_USART_TIMEOUT` from ergodox_infinity/config.h Was somewhat mistakenly included in an earlier PR. * Fix building with `USE_I2C`. * Reduce built firmware size. Not really sure why this works, the idea was taken from tzarc's work on split disconnection. * Tweak and improve opt-out for split disconnection logic. There are now two ways to opt out from this feature: * Set `SPLIT_MAX_CONNECTION_ERRORS` to 0. This will completely disable the connection status checks (also affects the slave matrix reset logic in matrix.c, though). * Set `SPLIT_CONNECTION_CHECK_TIMEOUT` to 0. This will only disable the communication throttling while disconnected. Will make the firmware smaller. * Make split disconnection logic work with custom transports. Includes a fallback implementation for keyboards using a custom split_util.c but not a custom matrix.c (currently no such keyboard seems to be merged, though). * Remove unnecessary include of timer.h Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com>
2021-08-15Fix ifdefs for OLED split sync code (#14017)Drashna Jaelre
2021-08-15Enable sync of OLED/ST7565 display on/off state on Splits (#13542)Drashna Jaelre
* Enable sync of OLED/ST7565 display on/off state on Splits * Only send if states are not matched Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-08-09Fix compilation issue. (#13926)Nick Brassel
2021-07-24Avoid LTO conficts on arm_atsam (#13676)Joel Challis
2021-07-11Unify matrix for split common and regular matrix (#13330)Drashna Jaelre
2021-07-05Allow invert of SPLIT_HAND_PIN logic (#13433)Jameson Thatcher
* added support for inverting the hand pin for split keyboards * Added docs about SPLIT_HAND_LOW_IS_LEFT * Update docs/feature_split_keyboard.md bring #define for split hand pin low for left half name in line with grid pin define Co-authored-by: Joel Challis <git@zvecr.com> * Update quantum/split_common/split_util.c update split hand pin low is left name to match split hand grid define Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com>
2021-07-03Add support for NO_PIN to all matrix types (#12238)Drashna Jaelre
Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-07-02Switch split_common to CRC subsystem (#13418)Stefan Kerkmann
2021-06-18Extensible split data sync (#11930)Nick Brassel
* Extensible split data sync capability through transactions. - Split common transport has been split up between the transport layer and data layer. - Split "transactions" model used, with convergence between I2C and serial data definitions. - Slave matrix "generation count" is used to determine if the full slave matrix needs to be retrieved. - Encoders get the same "generation count" treatment. - All other blocks of data are synchronised when a change is detected. - All transmissions have a globally-configurable deadline before a transmission is forced (`FORCED_SYNC_THROTTLE_MS`, default 100ms). - Added atomicity for all core-synced data, preventing partial updates - Added retries to AVR i2c_master's i2c_start, to minimise the number of failed transactions when interrupts are disabled on the slave due to atomicity checks. - Some keyboards have had slight modifications made in order to ensure that they still build due to firmware size restrictions. * Fixup LED_MATRIX compile. * Parameterise ERROR_DISCONNECT_COUNT.
2021-06-09Use single memcmp to determine if matrix changed. (#13064)Nick Brassel
* Use memcmp to determine if matrix changed. * Firmware size issues. * Add documentation for the lack of need of MATRIX_ROW_PINS/MATRIX_COL_PINS, when overriding low-level matrix functions.
2021-06-01Add weak refs on reading rows/cols. (#13062)Nick Brassel
2021-05-29run: qmk cformat --core-onlyJames Young
2021-05-20matrix: wait for row signal to go HIGH for every row (#12945)Michael Stapelberg
I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem.
2021-05-14Fix spelling mistake regarding LED Matrix in split_common. (#12888)Joakim Tufvegren